Introduzione
This manual provides comprehensive instructions for the setup, operation, and troubleshooting of your Amazon Fire TV Stick Replacement Remote, model CV98LM. Please read these instructions carefully to ensure proper use and to maximize your experience with the device.
Prodotto finitoview
The Amazon Fire TV Stick Replacement Remote (Model CV98LM) is designed to provide seamless control over your Amazon Fire TV Stick. This remote is not voice-operated and offers standard navigation and playback controls for an intuitive user experience. It connects to your Fire TV Stick via Bluetooth, allowing control from various locations within a room.
Immagine: Frontale view of the Amazon Fire TV Stick Replacement Remote, showing its buttons and ergonomic design.
Caratteristiche principali:
- Direct replacement for Amazon Fire TV Stick remotes (non-voice models).
- Standard navigation and playback controls for easy content management.
- Connettività Bluetooth per un controllo affidabile.
Configurazione e abbinamento
Follow these steps to pair your replacement remote with your Amazon Fire TV Stick:
- Rimuovere le batterie: Take the batteries out of the replacement remote.
- Unplug Fire TV Stick: Disconnect the power cable from your Fire TV Stick and unplug the Fire TV Stick from the HDMI port on your television. Wait for approximately 40 seconds.
- Reinsert Batteries: Place the batteries back into the replacement remote, ensuring correct polarity.
- Reconnect Fire TV Stick: Plug the Fire TV Stick back into the HDMI port and reconnect its power cable.
- Avvia associazione: As soon as the Amazon Fire TV logo appears on your screen, press and hold the Casa button on your new replacement remote.
- Finalize Pairing (using existing remote or app): If you have an existing remote or the Fire TV Remote app on your smartphone, navigate to Impostazioni > Telecomandi e dispositivi Bluetooth > Amazon Fire TV Remotes > Aggiungi nuovo telecomando. Select your new remote (it may appear as "Amazon Fire TV Remote") from the list to complete the pairing process.
- Your new remote should now be ready for use.
Istruzioni per l'uso
The replacement remote provides intuitive controls for navigating your Fire TV Stick:
- Anello di navigazione: Use the circular ring to move up, down, left, and right through menus and content.
- Seleziona pulsante: The center button within the navigation ring confirms selections.
- Pulsante Home: Ti riporta alla schermata iniziale di Fire TV.
- Pulsante Indietro: Ritorna alla schermata o al menu precedente.
- Pulsante Menu: Accede alle opzioni contestuali all'interno delle app o dei menu.
- Pulsante Play/Pausa: Controlla la riproduzione multimediale.
- Pulsanti di avanzamento rapido/riavvolgimento: Salta avanti o indietro nella riproduzione multimediale.
Risoluzione dei problemi
If you encounter issues with your replacement remote, try the following solutions:
Remote Not Responding or Pairing:
- Power Cycle Remote and Device:
- Rimuovere le batterie dal telecomando.
- Unplug the Fire TV Stick from its HDMI port and disconnect its micro USB power cable.
- Wait for at least 1 minute.
- Reconnect the micro USB power cable to the Fire TV Stick, then plug the Fire TV Stick back into the HDMI port.
- Once the Fire TV logo appears on the screen, insert fresh batteries into the remote.
- After the home screen loads, press and hold the Casa button on the remote for 10 seconds to attempt pairing.
- Perform a Software Reset on the Remote:
- Premere e tenere premuto contemporaneamente il tasto Menu pulsante, il Sinistra button (left side of the navigational ring), and the Indietro button (the arrow that curves back toward the left) for 10 seconds.
- The remote will become inactive for up to 2 minutes during this reset.
- If the remote does not automatically pair afterward, press and hold the Casa button for at least 10 seconds to make it discoverable for pairing.
- Controllare le batterie: Ensure batteries are correctly inserted and are not depleted. Replace with fresh batteries if necessary.
- Ostacoli chiari: Ensure there are no physical obstructions between the remote and the Fire TV Stick.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | CV98LM |
| Dimensioni del prodotto | 4.68 x 1.59 x 0.55 pollici |
| Peso dell'articolo | 1.12 once |
| Connettività | Bluetooth |
| Produttore | AMDSI |
| Prima data disponibile | 27 ottobre 2014 |
Garanzia e supporto
For information regarding warranty coverage and customer support, please refer to the documentation provided with your original Amazon Fire TV Stick or visit the official Amazon support webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.
