Prodotto finitoview
The Cen-Tech 6/12V Circuit Tester is a diagnostic tool designed to quickly check for the presence of electrical current in 6-volt and 12-volt DC systems. It features a durable construction with a needle point probe and an integrated indicator light to confirm circuit activity.
Informazioni importanti sulla sicurezza
Read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Indossare sempre occhiali di sicurezza approvati ANSI durante l'uso.
- Do not use this circuit tester on AC voltage or circuits exceeding 12 volts DC.
- Ensure the alligator clip has a secure and clean ground connection before probing.
- Evitare il contatto con componenti elettrici sotto tensione.
- Keep hands and clothing away from moving parts when working on vehicles.
- Controllare che l'utensile non sia danneggiato prima di ogni utilizzo. Non utilizzarlo se danneggiato.
- Tenere fuori dalla portata dei bambini.
Impostare
The Cen-Tech 6/12V Circuit Tester requires minimal setup. Ensure the tool is clean and free from any visible damage before beginning your work.
- Uncoil the lead wire and ensure it is not tangled or kinked.
- Confirm the needle point probe is securely attached and not bent.
Istruzioni per l'uso
Follow these steps to test for voltage in 6V or 12V DC circuits:
- Prepare the Circuit: Ensure the circuit you intend to test is accessible and safe to work on.
- Collegare a terra: Attach the alligator clip of the circuit tester to a reliable ground source. For vehicle applications, this is typically the negative terminal of the battery or a clean, unpainted metal part of the chassis. A good ground connection is essential for accurate readings.
- Probe the Circuit: Carefully touch the needle point probe to the wire, terminal, or component you wish to test. Ensure firm contact.
- Osservare la spia luminosa: If electrical current is present at the point of contact, the indicator light within the tester's handle will illuminate. The brightness of the light may vary with voltage, but its illumination confirms current flow.
- Interpretare i risultati: If the light illuminates, the circuit is live. If the light does not illuminate, there is no current, or the circuit is open at that point.
- Disconnetti: After testing, carefully remove the probe from the circuit and then disconnect the alligator clip from the ground source.
Manutenzione
Proper maintenance ensures the longevity and reliability of your circuit tester.
- Pulizia: After each use, wipe the probe and handle with a clean, dry, soft cloth to remove any dirt, grease, or moisture.
- Magazzinaggio: Store the circuit tester in a dry, clean environment, away from direct sunlight, extreme temperatures, and corrosive materials.
- Ispezione: Periodically inspect the lead wire for cuts, fraying, or damage. Check the probe for bends or corrosion. Replace the unit if any damage is found.
Risoluzione dei problemi
Per i problemi più comuni e le relative soluzioni, fare riferimento alla tabella sottostante.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Indicator light does not illuminate on a known live circuit. | Poor or no ground connection. | Ensure the alligator clip is securely connected to a clean, reliable ground source. |
| Indicator light is dim. | Basso volumetage in the circuit or poor contact. | Verificare il volume del circuitotage is within the 6-12V range. Ensure good contact with both the probe and the ground. |
| Tester appears physically damaged. | Impatto fisico o usura. | Discontinue use immediately. Replace the unit to ensure safety and accurate testing. |
Specifiche
- Marca: Cen-Tech
- Numero modello: CECOMINOD036567
- Volume di eserciziotage: 6V / 12V CC
- Lunghezza del cavo: 5 piedi
- Tipo di sonda: Needle Point
- Materiale dell'impugnatura: Heavy duty high impact plastic
- Peso dell'articolo: 16 once (1 libbra)
- Fonte di energia: Corded Electric (relies on circuit power)
- Tipo di misurazione: Voltmeter (indicates presence of voltage)
- Codice UPC: 784672317917
Informazioni sulla garanzia
For specific warranty details, please refer to the documentation provided at the time of purchase or contact the retailer directly. Warranty terms typically cover manufacturing defects for a limited period.
Assistenza clienti
If you have questions or require assistance with your Cen-Tech 6/12V Circuit Tester, please contact the retailer where the product was purchased or refer to Cen-Tech's official customer service channels for support.
