TC Electronic T2 Reverb Effects Pedal User Manual

Introduzione

The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.

Prodotto finitoview

The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:

Manopola DECAY: Controlla la lunghezza della coda del riverbero.
Manopola TONE: Adjusts the brightness or darkness of the reverb.
Manopola MIX: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
Interruttore a pedale: Attiva o bypassa l'effetto.
Jack di ingresso/uscita: For connecting your instrument and amppiù vivace.
Potenza in ingresso: For connecting a 9V DC power supply.

TC Electronic T2 Reverb Pedal top view showing Decay, Tone, Mix knobs, Reverb Type selector, and footswitch. — Figura 1: in alto view of the TC Electronic T2 Reverb pedal, highlighting the control knobs and footswitch.

Angolato view of TC Electronic T2 Reverb Pedal showing input and output jacks. — Figura 2: Angolato view of the TC Electronic T2 Reverb pedal, illustrating the input and output jacks on the sides.

Impostare

Collegamento elettrico: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
Collegamento dello strumento: Collega il tuo strumento (ad esempio la chitarra) al jack di ingresso sul lato destro del pedale utilizzando un cavo standard per strumenti da 1/4 di pollice.
AmpCollegamento lifier: Collega il jack di uscita sul lato sinistro del pedale al tuo ampingresso del lifier utilizzando un cavo per strumenti standard da 1/4 di pollice.
Stereo Operation (Optional): For stereo output, connect the second output jack to a second amplificatore o dispositivo di input stereo.

Assicurati che tutte le connessioni siano sicure prima di accendere il tuo amplificatore e pedale.

Istruzioni per l'uso

Funzionamento di base

Accensione: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
Selezione del tipo di riverbero: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
Adjusting Reverb Parameters:
- Utilizzare il DECADIMENTO knob to control the duration of the reverb.
- Utilizzare il TONO knob to adjust the frequency content of the reverb, making it brighter or darker.
- Utilizzare il MESCOLARE knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.

TonePrint Feature

The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.

Manutenzione

Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno del pedale. Evitare detergenti abrasivi o solventi.
Sostituzione della batteria: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
Magazzinaggio: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
Nessun suono o segnale debole	Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp rifiutato.	Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately.
Rumore o ronzio indesiderati	Ground loop, faulty cables, interference from other electronics, improper power supply.	Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices.
Effect not engaging (LED off)	Nessuna alimentazione, pedale difettoso.	Verify power connection and battery status. If problem persists, contact support.
TonePrint not loading	Incorrect app usage, connection issues.	Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance.

Specifiche

Modello: T2
Peso dell'articolo: 1 pound (approximately 454 grams)
Dimensioni del prodotto: 4.61 x 2.48 x 2.91 pollici (11.7 x 6.3 x 7.4 cm)
Fonte di energia: Adattatore di alimentazione da 9 V CC (polo negativo centrale) o batteria da 9 V
Voltage: 9 Volt
Formato del segnale: Analogico
Interfaccia hardware: HP-HSC

Garanzia e supporto

TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic webo contattare direttamente l'assistenza clienti. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Ufficiale Websito: www.telectronic.com

	TC Electronic Hall of Fame 2 Reverb Quick Start Guide A concise guide to the TC Electronic Hall of Fame 2 Reverb pedal, covering its controls, features, and basic operation. Includes information on USB connectivity, TonePrint editing, MASH function, and FCC compliance.
	Guida rapida all'uso del TC Electronic Hall of Fame 2 Mini Reverb A concise guide to the TC Electronic Hall of Fame 2 Mini Reverb effects pedal, covering controls, connections, and compliance information.
	Guida rapida al riverbero Skysurfer di TC Electronic Una guida concisa al TC Electronic Skysurfer Reverb, che descrive in dettaglio i suoi controlli, le connessioni e le caratteristiche per effetti di riverbero di qualità da studio.
	TC Electronic INFINITE SAMPLE SUSTAINER Quick Start Guide Concise quick start guide for the TC Electronic INFINITE SAMPLE SUSTAINER guitar effects pedal, detailing its controls, features, and basic operation.
	Manuale utente del TC Electronic Hall of Fame Reverb Manuale utente completo per il pedale TC Electronic Hall of Fame Reverb, che comprende istruzioni di sicurezza, caratteristiche, controlli, tipi di riverbero, TonePrint, modalità bypass e specifiche tecniche.
	TC Electronic PLETHORA X5 Quick Start Guide: TonePrint Pedalboard with MASH Footswitches Get started quickly with the TC Electronic PLETHORA X5, a versatile TonePrint pedalboard featuring five MASH footswitches. Learn about its controls, features, specifications, and how to transfer TonePrints.

TC Electronic T2