1. Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your 1byone OUSQH-0535 Easy Chime Wireless Doorbell Kit. This kit includes two plug-in receivers and one push button, designed to provide a reliable and convenient notification system for your home or office. Please read this manual thoroughly before use to ensure proper functionality and safety.
2. Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- 2 x 1byone Plug-in Receivers
- 1 x 1byone Wireless Push Button
- 1 x AAA Battery (pre-installed in push button)
- Mounting Hardware (screws and adhesive tape)
Figure 2.1: Complete 1byone Wireless Doorbell Kit
3. Caratteristiche del prodotto
- Portata wireless estesa: Operates up to 100 meters (300 feet) in open areas, ensuring reliable signal transmission throughout most homes.
- Multiple Chime Tones: Offers 36 selectable CD-quality melodies.
- Volume regolabile: Three volume levels ranging from 25dB to 85dB.
- Avviso visivo: Integrated LED flash provides a visual notification, beneficial for the hearing impaired or noisy environments.
- Weatherproof Push Button: IP44 rated for outdoor use, protecting against dust and splashing water.
- Sistema espandibile: Supports adding additional 1byone chimes or push buttons.
- Installazione semplice: Simple plug-and-play setup for receivers and flexible mounting options for the push button.
Figure 3.1: Wireless Range Illustration
4. Identificazione dei componenti
4.1. Plug-in Receiver
Figure 4.1: Receiver Controls and Features
- Sound/LED Flash Switch: Toggles between sound only, LED flash only, or sound and LED flash modes.
- Tappo: Per il collegamento a una presa elettrica standard.
- Regolazione del volume: Cycles through three volume levels (low, medium, high).
- Selettore melodia: Cycles through the 36 available chime melodies.
- Auto-learning Code Button: Used for pairing the receiver with a push button.
4.2. Wireless Push Button
Figure 4.2: Wireless Push Button
- Premi il bottone: Attiva il suono del campanello.
- Indicatore LED: Illuminates when the button is pressed, confirming signal transmission.
- Vano batteria: Located on the back, houses the AAA battery.
5. Impostazione
5.1. Installing the Push Button
- Installazione della batteria: The push button comes with a pre-installed AAA battery. If replacement is needed, carefully open the back cover to access the battery compartment. Ensure correct polarity.
- Posizione di montaggio: Choose a flat, vertical surface near your door. Ensure the location is easily accessible to visitors and within the wireless range of your receivers.
- Opzioni di montaggio:
- Nastro adesivo: Peel off the protective film from the included double-sided adhesive tape and firmly press the push button onto the desired surface for at least 30 seconds.
- Viti: Use the provided screws and wall anchors to securely fasten the push button to the wall. It is recommended to apply a small amount of silicone sealant around the screw holes on the back of the button to enhance weather resistance.
5.2. Installing the Receivers
- Select a standard electrical outlet in a central location within your home or in areas where you wish to hear the chime.
- Plug the receiver directly into the electrical outlet. The receiver will power on.
- Repeat for the second receiver in another desired location.
5.3. Pairing the Push Button with Receivers (Auto-Learning)
The push button and receivers are typically pre-paired at the factory. If they do not work out of the box, or if you wish to add additional push buttons/receivers, follow these steps:
- Collegare il ricevitore a una presa elettrica.
- Premere e tenere premuto il tasto Pulsante del codice di autoapprendimento on the receiver for approximately 5 seconds until the receiver emits a 'ding' sound and its LED indicator flashes. This indicates it is in pairing mode.
- Immediately press the wireless push button. The receiver will chime, confirming successful pairing.
- Test the pairing by pressing the push button. The receiver should chime.
- Repeat this process for any additional receivers you wish to pair with the same push button.
6. Funzionamento
6.1. Melodie cangianti
Per selezionare una melodia diversa:
- Premere il tasto Selettore di melodie button on the side of the receiver. Each press will cycle to the next available melody.
- Stop pressing when you hear your desired melody. The selected melody will be saved.
6.2. Regolazione del volume
To change the volume level:
- Premere il tasto Regolazione del volume button on the side of the receiver. Each press will cycle through the three available volume levels (low, medium, high).
- Seleziona il livello di volume più adatto al tuo ambiente.
6.3. Sound and LED Flash Modes
To switch between notification modes:
- Utilizzare il Sound/LED Flash Switch sul lato del ricevitore.
- Toggle the switch to select sound only, LED flash only, or both sound and LED flash.
7. Manutenzione
7.1. Push Button Battery Replacement
When the push button's LED indicator no longer illuminates or the signal becomes unreliable, it's time to replace the battery.
- Carefully open the back cover of the push button. Note that the cover may be tight to ensure weather resistance.
- Rimuovere la vecchia batteria AAA.
- Insert a new AAA battery, ensuring correct positive (+) and negative (-) polarity.
- Chiudere saldamente il coperchio posteriore.
- Test the push button with the receivers to confirm functionality.
7.2. Pulizia
To clean the doorbell components, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse any part in water.
8. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il ricevitore non suona. | Ricevitore non acceso. Push button battery low/dead. Non accoppiato. Fuori dal limite. | Assicurarsi che il ricevitore sia collegato a una presa di corrente funzionante. Sostituire la batteria a pulsante. Re-pair the push button and receiver (Section 5.3). Move receiver closer to push button. |
| Il campanello suona in modo casuale. | Interferenze da altri dispositivi wireless. Fattori ambientali. | Re-pair the push button and receiver to reset the code (Section 5.3). Ensure no other strong radio frequency devices are directly adjacent to the doorbell components. |
| Receiver loses pairing after power cut. | Temporary power interruption. | Re-pair the push button and receiver (Section 5.3). |
| Push button difficult to open for battery replacement. | Tight seal for weather protection. | Use a small, flat tool to gently pry open the cover. Exercise caution to avoid damage. |
| Sound quality not as expected. | Subjective perception. Limitazioni degli altoparlanti. | While the system offers 36 melodies, sound quality can vary. Ensure volume is set appropriately. |
9. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Nome del modello | OUSQH-0535 |
| Marca | 1dauno |
| Colore | Nero |
| Materiale | Metal (components may include plastic) |
| wireless Range | Fino a 100 metri (300 piedi) |
| Melodie | 36 selezionabili |
| Livelli di volume | 3 (da 25 dB a 85 dB) |
| Valutazione del pulsante | IP44 (resistente alle intemperie) |
| Batteria a pulsante | 1 x AAA (incluse) |
| Potenza del ricevitore | AC Plug-in (Voltage: 12V, Power Consumption: <5W) |
| Peso dell'articolo | Circa 7.8 once (0.49 libbre) |
| Dimensioni del prodotto | Receivers: 4.72 x 3.15 x 4.72 inches Push Button: 3.42 x 1.38 inches (approx.) |
Figura 9.1: Dimensioni del prodotto
10. Informazioni sulla sicurezza
- Do not expose the push button to extreme temperatures or direct sunlight for prolonged periods.
- Ensure receivers are plugged into easily accessible outlets for quick disconnection if needed.
- Do not attempt to disassemble or repair the product yourself. Refer all servicing to qualified personnel.
- Tenere le batterie fuori dalla portata dei bambini. Smaltire le batterie usate secondo le normative locali.
- Avoid placing receivers near strong electromagnetic fields, which may interfere with operation.
11. Garanzia e supporto
For warranty information or technical support, please contact 1byone customer service through their official website or the retailer where the product was purchased. Please have your model number (OUSQH-0535) and purchase details ready.
