Introduzione
This manual provides instructions for the proper setup, operation, and maintenance of your Technoline WS 1050 Wireless BBQ Thermometer. Please read this manual thoroughly before using the device to ensure safe and efficient operation.
Caratteristiche del prodotto
- Wireless BBQ thermometer with backlight.
- Selectable settings for 8 types of meat and 5 taste levels.
- Temperature alert function for current and target meat temperatures.
- Countdown/count-up timer function.
- Temperature display in °C/°F.
Contenuto della confezione
Verificare che tutti i componenti siano presenti:
- 1x Technoline WS 1050 Wireless BBQ Thermometer (Transmitter and Receiver unit)
- 1x Meat Probe
- Manuale d'uso
- Batteries (AAA batteries required, not always included)
Impostare
1. Installazione della batteria
Locate the battery compartments on both the transmitter and receiver units. Insert the required AAA batteries, ensuring correct polarity (+/-). Close the battery covers securely.
2. Collegamento della sonda
Connect the meat probe cable to the designated port on the transmitter unit. Ensure a firm connection.
Image: The Technoline WS 1050 transmitter unit with the meat probe connected, showing the display with 'WELL' and temperature readings. The unit is placed on its stand next to an oven.
Istruzioni per l'uso
1. Accensione/spegnimento
Press the power button on both the transmitter and receiver units to turn them on. The units should automatically pair. If not, refer to the troubleshooting section.
2. Selecting Meat Type and Taste Level
- Premere il tasto CARNE button to cycle through the 8 available meat types (e.g., Beef, Lamb, Pork, Chicken).
- Premere il tasto GUSTO button to select the desired doneness level (e.g., Rare, Medium Rare, Medium, Well Done).
Image: A hand holding the Technoline WS 1050 receiver unit, displaying 'WELL' and temperature readings. The meat probe is visible inside an oven in the background.
3. Monitoraggio della temperatura
Insert the meat probe into the thickest part of the meat, avoiding bone or gristle. The current internal temperature will be displayed on both units. The target temperature is automatically set based on your meat type and taste level selection.
4. Allarme temperatura
When the meat reaches the target temperature, the receiver unit will emit an audible alarm and/or visual alert. Remove the meat from the heat source immediately.
5. Funzione timer
The device includes a countdown/count-up timer. Use the MINIMO E SEC buttons to set the desired time for the countdown timer. Press AVVIO/ARRESTO to begin or pause. Press CHIARO per reimpostare il timer.
Image: The Technoline WS 1050 thermometer displaying 'MEDIUM' with a blue backlight, showing current and target temperatures, and a timer.
Manutenzione
Pulizia
- Always clean the meat probe thoroughly after each use with warm, soapy water. Rinse and dry completely.
- Do not immerse the transmitter or receiver units in water. Wipe them clean with a damp stoffa.
- Avoid using abrasive cleaners or scouring pads, as these can damage the device.
Magazzinaggio
Store the thermometer and probe in a clean, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessun display/Il dispositivo non si accende | Batterie scariche o inserite in modo errato. | Sostituire le batterie con nuove batterie AAA, assicurandosi della corretta polarità. |
| No temperature reading/ "--" displayed | Probe not properly connected or damaged. Transmitter and receiver not paired. | Ensure probe is firmly connected. Check for visible damage to the probe. Power cycle both units to re-establish connection. If problem persists, probe may need replacement. |
| Letture della temperatura imprecise | Sonda non inserita correttamente nella carne. Sonda danneggiata. | Re-insert probe into the thickest part of the meat, away from bone. Test probe in boiling water (should read 100°C/212°F) or ice water (should read 0°C/32°F) to check accuracy. |
| Nessuna connessione wireless | Units too far apart or obstructions. Low batteries. | Move receiver closer to the transmitter. Ensure no large metal objects are blocking the signal. Replace batteries in both units. |
Specifiche
- Modello: TechnolineWS1050
- Tipo di visualizzazione: LCD con retroilluminazione
- Connettività: Senza fili
- Energia: AAA batteries (quantity not specified, typically 2-4)
- Dimensioni: Circa 7.5 x 5.5 x 13 cm
- Peso: Circa 33 g
- Unità di temperatura: °C / °F selezionabile
- Caratteristiche: 8 meat types, 5 taste levels, temperature alert, countdown/count-up timer.
Garanzia e supporto
For warranty information or technical support, please contact your retailer or the manufacturer, Technotrade. Keep your proof of purchase for warranty claims.
Manufacturer: Technotrade
Model Number: WS 1050
