Manuale utente del termometro digitale per interni ed esterni EMOS E0041

1. Introduzione

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your EMOS E0041 Digital Outdoor and Indoor Thermometer. Please read this manual thoroughly before using the device to ensure correct functionality and to prevent damage.

The EMOS E0041 thermometer features a clear, easy-to-read display with large digits, designed for straightforward temperature monitoring. It accurately measures both indoor and outdoor temperatures with a resolution of 0.1 °C.

2. Contenuto della confezione

• EMOS E0041 Digital Thermometer Unit
• Wired Outdoor Sensor (2 meters cable length)
• Manuale d'uso

3. Informazioni sulla sicurezza

• Do not expose the main unit to direct moisture or extreme temperatures.
• The outdoor sensor is designed for outdoor use but should be protected from direct heavy rain or snow for prolonged durability.
• Use only 2 x 1.5 V AAA micro batteries. Do not mix old and new batteries, or different types of batteries.
• Smaltire le batterie usate secondo le normative locali.
• Tenere il dispositivo fuori dalla portata dei bambini.

4. Prodotto finitoview

The EMOS E0041 thermometer consists of a main display unit and a wired outdoor sensor. The display shows both indoor ('IN') and outdoor ('OUT') temperatures simultaneously.

Figura 4.1: Fronte view of the EMOS E0041 Digital Thermometer, displaying indoor and outdoor temperatures.

Figure 4.2: The EMOS E0041 thermometer unit with its wired outdoor sensor cable.

5. Impostazione

5.1 Installazione della batteria

1. Individuare il vano batterie sul retro dell'unità termometro.
2. Per aprire il coperchio del vano batteria, farlo scorrere verso il basso.
3. Insert two (2) 1.5 V AAA micro batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Replace the battery compartment cover. The display should activate.

Figura 5.1: Posteriore view of the thermometer, highlighting the battery compartment.

5.2 Posizionamento del sensore

The wired outdoor sensor has a 2-meter cable. For accurate outdoor temperature readings:

• Route the sensor cable through a window frame or a small opening to the outside.
• Position the sensor in a shaded area, away from direct sunlight, heat sources, or reflective surfaces, which can affect temperature accuracy.
• Ensure the sensor is protected from direct heavy precipitation.

5.3 Opzioni di montaggio

The EMOS E0041 thermometer is designed for versatile placement:

• In piedi: Utilize the integrated stand on the back of the unit to place it on a flat surface, such as a desk or shelf.
• Montaggio a parete: Use the hanging hole located on the back of the unit to mount it on a wall using a screw or nail (not included).

Figura 5.2: Posteriore view showing the integrated stand and wall mounting option.

6. Istruzioni per l'uso

6.1 Accensione

The device powers on automatically once batteries are correctly installed. There is no separate power button.

6.2 Lettura delle temperature

The large LCD display simultaneously shows two temperature readings:

• The upper reading, labeled 'OUT', indicates the temperature measured by the wired outdoor sensor.
• The lower reading, labeled 'IN', indicates the temperature measured by the internal sensor within the main unit.

Both temperatures are displayed in degrees Celsius (°C) with a resolution of 0.1 °C.

7. Manutenzione

7.1 Pulizia

To clean the thermometer unit, gently wipe it with a soft, damp panno. Non utilizzare detergenti abrasivi, solventi o immergere l'unità in acqua.

7.2 Sostituzione della batteria

When the display becomes dim or the readings are inconsistent, it is time to replace the batteries. Follow the battery installation steps in Section 5.1. Always replace both AAA batteries simultaneously.

8. Risoluzione Dei Problemi

• Nessun display o display poco luminoso:
  Check if the batteries are inserted correctly with the right polarity. Replace old batteries with new 1.5 V AAA batteries.
• Incorrect outdoor temperature reading:
  Ensure the outdoor sensor is properly connected to the main unit. Verify the sensor is placed in a shaded area, away from direct sunlight or heat sources.
• Incorrect indoor temperature reading:
  Ensure the main unit is not placed near heat sources (e.g., radiators, direct sunlight) or cold drafts (e.g., open windows).
• Display shows '---' or 'LL.L' / 'HH.H':
  This indicates the temperature is outside the measurable range or the sensor connection is faulty. Check sensor connection and ensure temperatures are within the specified operating range.

9. Specifiche

10. Garanzia e supporto

Per informazioni sulla garanzia o supporto tecnico, fare riferimento al sito ufficiale EMOS webo contatta il tuo rivenditore locale. Conserva la ricevuta d'acquisto come prova d'acquisto.