TC Electronic Ditto+ Looper Pedal User Manual

1. Introduzione

The TC Electronic Ditto+ Looper Pedal is a compact and powerful looping device designed for musicians. It offers 60 minutes of looping time with unlimited overdubs, dynamic loop length, and 99 loop storage slots. Featuring a high-resolution color display and intuitive 1-knob control, the Ditto+ provides a streamlined looping experience. Its 24-bit uncompressed audio ensures high fidelity, while analog-dry-through preserves your original signal. This manual provides detailed instructions for setting up, operating, and maintaining your Ditto+ Looper Pedal.

2. Caratteristiche principali

Multi-session Looper Pedal with 24-bit Sound Quality
99-loop Storage Capacity
High-resolution Color Display
Unlimited Overdubs
Intuitive 1-knob Control
Dynamic Loop Length for layering long overdubs onto shorter loops
Easy Import and Export of loops via USB
Retains loops in internal memory after power-down
Analog-dry-through design for signal integrity

3. Guida all'installazione

3.1 Disimballaggio e ispezione

Carefully remove the Ditto+ Looper Pedal from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Retain the packaging for future transport or storage.

3.2 Collegamento di alimentazione

The Ditto+ requires a 9V DC power supply (not included) with a center-negative polarity. Connect the power adapter to the 9V DC input jack on the pedal. Ensure the power supply meets the specifications (9 Volts, 0.1 Amps) to prevent damage.

Angolato view of TC Electronic Ditto+ Looper Pedal showing input/output jacks and power input

Immagine 1: Angolato view of the Ditto+ pedal, highlighting the input and output jacks on the sides, and the power input jack. This view helps identify connection points.

3.3 Collegamenti audio

Collega il tuo strumento (ad esempio, la chitarra) al INGRESSO jack sul lato destro del pedale utilizzando un cavo standard per strumenti da 1/4 di pollice.
Collegare il PRODUZIONE jack sul lato sinistro del pedale al tuo amplifier o altri pedali per effetti utilizzando un altro cavo standard per strumenti da 1/4 di pollice.

3.4 Connessione USB

The Ditto+ features a USB port for importing and exporting loops. Connect a standard USB cable from the pedal to your computer for managing your loop library. The USB port is located on the top side of the pedal.

Angolato view of TC Electronic Ditto+ Looper Pedal showing the USB port

Immagine 2: Angolato view of the Ditto+ pedal, clearly showing the USB port located on the top edge of the device, used for data transfer.

4. Istruzioni per l'uso

4.1 Funzioni di looping di base

Davanti view of TC Electronic Ditto+ Looper Pedal with display and controls

Immagine 3: Davanti view of the Ditto+ pedal, displaying the main screen, the large central knob, the two arrow buttons, and the footswitch. This image illustrates the primary user interface.

Documentazione: Premere una volta il pedale per avviare la registrazione. Il display indicherà lo stato della registrazione.
Riproduci/Interrompi: After recording, press the footswitch once to stop recording and immediately start playback of your loop. During playback, press the footswitch once to stop the loop.
Sovraincisione: While a loop is playing, press the footswitch once to enter overdub mode. Any new audio played will be added to the existing loop. Press again to stop overdubbing and return to playback.
Annulla/Ripristina: Press and hold the footswitch during playback to undo the last overdub. Press and hold again to redo it.
Ciclo chiaro: Double-tap the footswitch quickly to stop playback and clear the current loop. Note: Be mindful of the double-tap timing to avoid accidental clearing during live performance.

4.2 Navigating Loops and Settings

The Ditto+ features a high-resolution color display and a large central knob for navigation and control. The two arrow buttons (< E >) allow you to scroll through different loop slots (up to 99) or menu options.

Selecting Loops: Use the arrow buttons to navigate between your 99 stored loop slots. The display will show the current loop number.
Adjusting Loop Volume: The large central knob controls the playback volume of the current loop. Turn it clockwise to increase volume and counter-clockwise to decrease.
Accesso ai menu: Pressing the central knob typically accesses menu options. Use the arrow buttons to navigate menu items and the knob to select or adjust values.

4.3 Extended Looping Mode

The Ditto+ offers an "Extended Looping Mode" which allows you to record a short initial loop and then overdub a longer phrase that automatically extends the overall loop length. This is particularly useful for creating complex arrangements.

Activate Extended Loop Mode: To enable this mode, press and hold both arrow buttons simultaneously. A menu will appear on the display. Navigate to the "Extended Loop Mode" option and select "ON".
Recording in Extended Mode:
- Record your initial, shorter loop as usual (press footswitch once to start, once to end).
- Immediately after the initial loop starts playing, press the footswitch once to enter overdub mode.
- Play your longer overdub. The pedal will use the original loop as a timing reference.
- To end the extended overdub, tap the footswitch Presto, before the desired end point. The pedal will then close the loop at the end of the next full bar, based on the original loop's timing. This ensures a musically coherent loop extension.
Subsequent Overdubs: After the extended loop is established, subsequent overdubs will function as normal, adding layers to the new, longer loop.

Note: The extended loop feature typically allows for one primary extension. You cannot infinitely re-adjust the loop length multiple times using this method.

4.4 Import/Export Loops

Connect the Ditto+ to your computer via USB. The pedal will appear as a mass storage device, allowing you to drag and drop audio files (WAV format recommended) to and from its internal memory. This enables you to back up your loops or load pre-recorded tracks.

5. Manutenzione

Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno del pedale. Evitare detergenti abrasivi o solventi.
Magazzinaggio: When not in use for extended periods, store the pedal in a dry, cool environment, away from direct sunlight and extreme temperatures.
Energia: Scollegare sempre l'alimentazione quando il pedale non è in uso o durante la pulizia.

6. Risoluzione Dei Problemi

Problema	Possibile causa	Soluzione
No power / Pedal does not turn on	Incorrect power supply; loose connection; faulty power adapter.	Ensure a 9V DC, center-negative power supply is used. Check all connections. Try a different power adapter if available.
Nessun suono dal pedale	Incorrect audio connections; instrument volume low; amplifier off; faulty cables.	Verificare lo strumento e amplifier connections. Check instrument and amplifier volume. Test with different cables.
Loop clears unexpectedly	Accidental double-tap of footswitch.	The "clear loop" function is a quick double-tap. Practice precise footswitch presses to avoid accidental clearing.
Difficulty with Extended Looping Mode	Incorrect activation or timing.	Assicurati di premere e hold both arrow buttons simultaneously to activate the mode. For ending an extended overdub, tap the footswitch Presto to allow the pedal to close the loop at the next bar's end.
Loops not saving	Power interruption during saving; memory issue.	The Ditto+ automatically retains loops. If issues persist, try re-saving or performing a factory reset (refer to official TC Electronic documentation for reset procedures).

7. Specifiche tecniche

Modello: Ditto+
Marca: TC Electronic
Peso dell'articolo: 6.3 once
Dimensioni del prodotto: 4 x 2.6 x 2.4 pollici
Interfaccia hardware: USB
Formato del segnale: Analogico
Fonte di energia: Elettrico con cavo
Voltage: 9 Volt CC
Ampera: 0.1 A (100mA)
Tipo di controlli: Knob, Footswitch, Buttons
Archiviazione in loop: 99 slot
Tempo di ciclo: Fino a 60 minuti
Qualità audio: 24-bit uncompressed

8. Garanzia e supporto

For warranty information, technical support, or further assistance with your TC Electronic Ditto+ Looper Pedal, please refer to the official TC Electronic websito o contattare direttamente il loro supporto clienti. Puoi anche visitare il TC Electronic Store on Amazon per ulteriori informazioni e risorse sul prodotto.

	Manuale utente TC Electronic Ditto Looper Manuale utente completo per il TC Electronic Ditto Looper, che copre configurazione, funzionamento, caratteristiche, specifiche tecniche e risoluzione dei problemi. Scopri come registrare, sovraincidere, annullare, ripetere e gestire i tuoi loop.
	Manuale utente TC Electronic Ditto Looper: caratteristiche, funzionamento e configurazione Manuale utente completo per il pedale per chitarra TC Electronic Ditto Looper. Scopri le sue caratteristiche, il funzionamento, la configurazione e altro ancora.amples, specifiche tecniche e risoluzione dei problemi.
	TC Electronic Ditto X4 Looper User Manual - Guitar Effects Pedal Guide Comprehensive user manual for the TC Electronic Ditto X4 Looper, a dual-track guitar looper pedal. Learn about its features, controls, effects, setup, hookup diagrams, and advanced functions for creating and managing loops.
	Manuale utente TC Electronic Ditto Looper Manuale utente completo per il TC Electronic Ditto Looper, che descrive in dettaglio le sue caratteristiche, il funzionamento, la configurazione e le specifiche tecniche per chitarristi e bassisti. Impara come registrare, sovraincidere, annullare, ripetere e gestire i tuoi loop.
	Manuale utente TC Electronic Ditto Looper Comprehensive user manual for the TC Electronic Ditto Looper, detailing its features, setup, operation, specifications, and troubleshooting. Learn how to record, overdub, undo, and manage loops with this compact guitar effects pedal.
	TC Electronic DITTO JAM X2 LOOPER Quick Start Guide Quick start guide for the TC Electronic DITTO JAM X2 LOOPER, a versatile looper pedal for musicians. Learn about loop clearing, BeatSense LED functions, microphone placement, and regulatory compliance.