1. Introduzione
This manual provides essential information for the proper setup, operation, and maintenance of your AEE Y08F Radio Controller/Transmitter. This controller is specifically designed for use with the AEE Toruk AP10 drone quadcopter, providing a reliable remote communications link for flight and camera controls.
Prodotto finitoview
The AEE Y08F Radio Controller operates on a 915MHz frequency, offering an operable range of up to 985 feet (300 meters) with an unobstructed line-of-sight. It features a frequency hopping anti-interference design to ensure stable communication. The controller is powered by four AA batteries and includes easy-to-use joystick controls along with dedicated toggles for camera angle and flight modes. It also integrates a smartphone holder for enhanced user experience.
2. Componenti e controlli del prodotto

The AEE Y08F Radio Controller is a white, ergonomic device designed for controlling the AEE Toruk AP10 drone. It features two main joysticks for flight control, various toggle switches for mode selection and camera functions, and a central power switch. A foldable smartphone holder is integrated at the top for FPV (First Person View) monitoring.
Componenti chiave:
- Joystick sinistro: Typically controls throttle (vertical movement) and yaw (rotation).
- Joystick destro: Typically controls pitch (forward/backward) and roll (left/right).
- Interruttori a levetta: Various switches for flight modes (e.g., GPS, Altitude Hold), camera recording, and photo capture.
- Interruttore di alimentazione: Central toggle switch for turning the controller on/off.
- Supporto per smartphone: Foldable bracket at the top to secure a smartphone for live video feed.
- Vano batteria: Located on the rear for AA batteries.
3. Impostazione
Installazione della batteria
- Individuare il vano batteria sul retro del controller.
- Aprire il coperchio del vano batterie.
- Inserire quattro (4) batterie AA, assicurandosi della corretta polarità (+/-) come indicato all'interno del vano.
- Chiudere saldamente il coperchio del vano batterie.
Initial Pairing with Drone
Before first use, the controller must be paired with your AEE Toruk AP10 drone. Refer to your drone's specific user manual for detailed pairing instructions. Generally, the process involves powering on the drone first, then the controller, and following a specific sequence of button presses or switch toggles to establish a connection. Ensure both devices are fully charged or have fresh batteries before attempting to pair.
4. Istruzioni per l'uso
Controlli di volo di base
- Acceleratore (joystick sinistro su/giù): Increases/decreases drone altitude.
- Imbardata (joystick sinistro sinistra/destra): Rotates the drone clockwise/counter-clockwise.
- Pitch (Right Joystick Up/Down): Moves the drone forward/backward.
- Roll (Right Joystick Left/Right): Moves the drone left/right (strafe).
Camera and Mode Controls
Utilize the dedicated toggle switches and buttons on the controller for specific functions:
- Flight Mode Toggles: Switch between different flight modes (e.g., GPS mode for stable hovering, Altitude Hold mode). Consult your drone's manual for specific mode definitions.
- Camera Angle Control: Adjust the camera's tilt angle during flight.
- Pulsanti Foto/Video: Initiate photo capture or start/stop video recording.
Always ensure you have a clear line-of-sight to the drone and are within the operable range (up to 985 feet) for optimal control and signal integrity.
5. Manutenzione
Pulizia
- Pulisci il controller con un panno morbido e asciutto.
- Do not use liquid cleaners or solvents, as they may damage the electronics or finish.
- Keep the joysticks and switches free from dust and debris.
Magazzinaggio
- Quando non si utilizzano per lunghi periodi, rimuovere le batterie AA per evitare perdite e danni.
- Conservare il controller in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Avoid placing heavy objects on the controller to prevent damage to joysticks or switches.
6. Risoluzione Dei Problemi
Problemi comuni e soluzioni:
- Il controller non si accende:
- Controllare che le batterie siano inserite correttamente, con la giusta polarità.
- Sostituirle con batterie AA nuove.
- Loss of signal or unresponsive controls:
- Ensure the drone and controller are within the operable range (300m).
- Check for potential sources of interference (e.g., large metal structures, other wireless devices).
- Re-pair the controller with the drone following the initial pairing procedure.
- Ensure controller batteries are not low.
- Smartphone not fitting in holder:
- The holder is designed for standard smartphone sizes. Ensure your phone is within the compatible dimensions.
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | Y08F |
| Produttore | AEE Technology |
| Frequenza di trasmissione | 915 MHz |
| Operable Range | Fino a 985 piedi (300 metri) |
| Fonte di alimentazione | 4 batterie AA |
| Dimensioni del prodotto | Dimensioni: 18.29 x 18.8 x 8.74 cm |
| Peso del prodotto | 548.85 grammi |
| Data prima disponibilità | 10 giugno 2015 |
8. Garanzia e supporto
For warranty information, technical support, or service inquiries regarding your AEE Y08F Radio Controller/Transmitter, please refer to the warranty card included with your original purchase or visit the official AEE Technology websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.
AEE Technology Customer Support: Please visit the manufacturer's official websito per le informazioni di contatto e le risorse di supporto più aggiornate.





