1. Introduzione
The Connects2 CTSFO003.2 is an interface designed to integrate an aftermarket car audio system with your vehicle's existing steering wheel controls. This device allows you to retain the functionality of your steering wheel buttons, such as volume control, track changes, and mode selection, when upgrading your car radio to a non-original equipment manufacturer (OEM) unit. This manual provides essential information for the correct installation and operation of the interface.
2. Compatibilità del veicolo
This interface is compatible with the following Ford vehicle models. Please ensure your vehicle is listed and falls within the specified year range. This unit is specifically for vehicles without 12V ignition power supplied directly on the vehicle's wiring harness.
- Ford C-Max: 2003 - 2010
- Ford Fiesta: 2005 - 2008
- Ford Focus: 2004 - 2011
- Ford Fusion: 2005 - 2012
- Ford Galaxy: 2006 - 2014
- Ford Mondeo: 2007 - 2014
- Ford S-Max: 2006 - 2014
- Ford Transit: 2006 - 2013
- Ford Kuga: 2008 - 2012
- Ford Transit Connect: 2004 - 2013
3. Contenuto della confezione
The Connects2 CTSFO003.2 package typically includes:
- Connects2 CTSFO003.2 Interface Module
- Cablaggio specifico per veicolo
- Universal Patch Lead (for connecting to aftermarket head unit)
Image 1: Connects2 CTSFO003.2 interface module and associated wiring harness. This image displays the main components included in the package, showing the central module and the various connectors for vehicle and head unit integration.
4. Configurazione e installazione
Importante: Installation should be performed by a qualified professional. Disconnect the vehicle's battery before beginning any electrical work to prevent short circuits or damage.
- Preparare il veicolo: Ensure the vehicle's ignition is off and disconnect the negative terminal of the vehicle battery.
- Remove OEM Head Unit: Carefully remove the factory-installed car radio from the dashboard. Refer to your vehicle's service manual for specific instructions on trim panel and head unit removal.
- Collegare l'interfaccia al veicolo: Connect the vehicle-specific wiring harness from the CTSFO003.2 kit to the corresponding connectors in your vehicle's dashboard. Ensure all connections are secure.
- Collegare l'interfaccia all'unità principale aftermarket: Connect the universal patch lead from the CTSFO003.2 interface module to the steering wheel control input (usually a 3.5mm jack or a specific wire labeled 'SWC' or 'Key1/Key2') on your aftermarket head unit. Then, connect the main harness from the CTSFO003.2 module to your aftermarket head unit's ISO connectors.
- Collegamento all'alimentazione (se applicabile): For vehicles without 12V ignition power on the harness, ensure the interface receives a switched 12V power supply from an alternative source (e.g., fuse box). Consult a wiring diagram or professional installer if unsure.
- Modulo sicuro: Once all connections are made, secure the CTSFO003.2 interface module in a safe location behind the dashboard, away from moving parts or heat sources.
- Funzionalità di prova: Reconnect the vehicle battery. Turn on the ignition and the aftermarket head unit. Test all steering wheel control buttons to ensure they function correctly with the new head unit.
- Rimontare: If all functions are confirmed, carefully reassemble the dashboard and secure the aftermarket head unit.
5. Istruzioni per l'uso
Once the Connects2 CTSFO003.2 interface is correctly installed and configured, it operates automatically. Your vehicle's steering wheel controls will now communicate with your aftermarket head unit. The specific functions available will depend on your vehicle's original steering wheel buttons and the capabilities of your aftermarket head unit.
- Volume su/giù: Regola il volume dell'audio.
- Traccia su/giù: Changes to the next or previous track/station.
- Modalità/Fonte: Switches between audio sources (e.g., Radio, USB, Bluetooth).
- Disattiva audio: Disattiva l'uscita audio.
Refer to your aftermarket head unit's manual for instructions on how to program or assign steering wheel control functions, if necessary.
6. Manutenzione
The Connects2 CTSFO003.2 interface is a sealed electronic unit and requires no routine maintenance. To ensure optimal performance and longevity:
- Ensure the module is securely mounted and not exposed to excessive vibration.
- Keep the module and its connections free from moisture and extreme temperatures.
- Do not attempt to open or modify the interface module, as this will void any warranty.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| I comandi al volante non funzionano. | Incorrect wiring connections. Aftermarket head unit not configured or incompatible. |
|
| Alcuni pulsanti funzionano, altri no. | Limited compatibility with specific head unit models or vehicle functions. |
|
| Delayed response from controls. | Compatibility issue between interface and head unit, or head unit processing speed. |
|
| No power to the head unit after installation. | Incorrect power connection, especially for vehicles without 12V ignition on harness. Blown fuse. |
|
8. Specifiche
- Produttore: Collega2
- Modello: CTSFO003.2
- Peso dell'articolo: 140 grammi
- Dimensioni del prodotto (L x P x A): Dimensioni: 30 x 25 x 5 cm
- Materiale: Plastica
- Tipo di connettore: Fakra 40 pins
9. Garanzia e supporto
For information regarding the product warranty, please refer to the documentation provided at the time of purchase or contact your retailer directly. Keep your proof of purchase for any warranty claims.
For technical support or further assistance with installation and troubleshooting, please contact the manufacturer, Connects2, or your authorized dealer. Contact details can typically be found on the manufacturer's official websito.
