Weiser Augusta Handle Set Instruction Manual

Introduzione

The Weiser Augusta Handle Set is a stylishly designed exterior door lock system from the Welcome Home series, engineered to provide maximum-security protection for your home. This handleset features a satin nickel finish, offering a modern aesthetic. It can be securely locked or unlocked using a key from the outside, or with a key or turnpiece from the inside. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your handle set.

Figure 1: Weiser Augusta Handle Set components, including the exterior handleset with deadbolt and the interior lever, all in a satin nickel finish.

Configurazione e installazione

This section outlines the steps required to properly install your Weiser Augusta Handle Set. Ensure you have all necessary tools before beginning the installation process.

Strumenti necessari:

• Cacciavite con testa a croce
• Nastro di misurazione
• Matita
• Drill (if new door preparation is needed)

Fasi di installazione:

1. Prepara la porta: Ensure your door has a 2-1/8 inch cross bore for the handleset. If installing on a new door, follow standard door preparation guidelines for bore holes and backset.
2. Install the Latch and Deadbolt: Insert the latch and deadbolt mechanisms into the door edge. Secure them with the provided screws. Ensure the latch bolt is facing the correct direction for your door swing.
3. Montare il set di maniglie esterne: Place the exterior handleset through the bore holes, aligning it with the latch and deadbolt.
4. Assemble Interior Components: Attach the interior mounting plate and lever assembly. Secure all components with the long through-bolts and screws provided.
5. Operazione di prova: Before closing the door, test the deadbolt and latch operation with the key from the outside and the turnpiece/key from the inside. Ensure smooth engagement and retraction.
6. Installare le piastre di battuta: Install the strike plates on the door frame, aligning them with the latch and deadbolt. Ensure a secure and flush fit.

Istruzioni per l'uso

The Weiser Augusta Handle Set is designed for ease of use and enhanced security.

Blocco e sblocco:

• Dall'esterno: Insert the key into the deadbolt cylinder and turn to lock or unlock. The handle below the deadbolt is a pull handle and does not require a key for entry once the deadbolt is unlocked.
• Dall'interno: Use the turnpiece on the deadbolt to lock or unlock. The interior lever operates the latch for entry/exit.

SmartKey Re-key Technology:

This handle set features SmartKey re-key technology, allowing you to re-key the lock yourself in seconds. This is useful if you want to match your lock to an existing key or if you lose a key and want to change the lock's keying.

1. Inserisci chiave corrente: Insert your currently working key fully into the SmartKey cylinder.
2. Chiavi in ​​mano: Rotate the key 90 degrees clockwise.
3. Inserisci lo strumento SmartKey: While the key is turned, insert the SmartKey tool firmly and fully into the small hole on the cylinder face.
4. Remove Current Key: Remove the current key while keeping the SmartKey tool inserted.
5. Inserisci nuova chiave: Insert your new key fully into the cylinder.
6. Remove SmartKey Tool: Rimuovere lo strumento SmartKey.
7. Prova nuova chiave: Rotate the new key 180 degrees counter-clockwise to the original position, then remove it. Test the new key to ensure it operates the lock smoothly.

For a visual guide, please refer to the official Weiser SmartKey re-keying video tutorials available on the Weiser website or authorized channels. (Note: No video provided in JSON, so this is a general suggestion).

Manutenzione

Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handle Set.

• Pulizia: Pulire le superfici esterne con un panno morbido eamp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the satin nickel finish.
• Lubrificazione: Periodically apply a silicone-based lubricant (do not use oil-based lubricants) to the internal mechanisms of the lock and deadbolt to ensure smooth operation. Apply sparingly into the keyway and latch bolt.
• Viti di serraggio: Over time, screws may loosen. Periodically check and tighten all mounting screws to ensure the handleset remains securely fastened to the door. Do not overtighten.

Risoluzione dei problemi

This section addresses common issues you might encounter with your Weiser Augusta Handle Set.

If you continue to experience issues after attempting these solutions, please contact Weiser customer support.

Specifiche

Garanzia e supporto

Weiser stands behind the quality of its products. Your Augusta Handle Set comes with a comprehensive warranty.

Informazioni sulla garanzia:

Questo prodotto è coperto da a Garanzia a vita limitata. This warranty covers defects in material and workmanship for the lifetime of the original residential user. For full details regarding warranty coverage, limitations, and claims procedures, please refer to the official Weiser websito o contattare l'assistenza clienti.

Assistenza clienti:

For technical assistance, warranty claims, or general inquiries, please contact Weiser customer support through their official channels:

• Websito: Visit the official Weiser websito per FAQ, registrazione prodotti e moduli di contatto. www.weiserlock.com
• Telefono: Refer to the Weiser websito per i numeri di telefono del servizio clienti regionale.

When contacting support, please have your product model number (GLA9471 A/A15 SMT VS) and purchase information readily available.