RAB VANLED20 20W LED Canopy Light Fixture User Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB VANLED20 20W LED Canopy Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for commercial lighting applications, offering high efficiency and durability.

Image 1.1: The RAB VANLED20 20W LED Canopy Light Fixture. This image shows the compact, low-profile design of the white LED canopy light, suitable for various commercial installations.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Rischio di scossa elettrica. Scollegare l'alimentazione dal fusibile o dall'interruttore automatico prima dell'installazione o della manutenzione.

• L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutti i codici elettrici nazionali e locali.
• Garantire la fornitura voltage is correct (120V-277V AC).
• Do not handle live components.
• Durante l'installazione indossare adeguati dispositivi di protezione individuale (DPI).
• This fixture is suitable for wet locations.
• Non modificare l'apparecchio. Qualsiasi modifica potrebbe invalidare la garanzia e creare rischi per la sicurezza.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• RAB VANLED20 20W LED Canopy Light Fixture (1)
• Mounting Hardware (Screws, Gaskets, etc.)
• Guida all'installazione (questo documento)

4. Configurazione e installazione

The VANLED20 is designed for ceiling mount installation to a recessed junction box or directly to the ceiling surface. It features side conduit entry points for flexible wiring.

1. Preparare il sito di installazione:
   • Disattivare la corrente elettrica tramite l'interruttore automatico.
   • Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 10.76 lbs).
2. Opzioni di montaggio:
   • Recessed Junction Box: Use the provided knockout template to align and secure the fixture to the junction box.
   • Direct Ceiling Surface: Utilize the side conduit entry points for wiring. Secure the fixture directly to the ceiling using appropriate mounting hardware (not always included, check package contents).
3. Cablaggio:
   • Connect the fixture's wires to the building's electrical supply wires according to local electrical codes.
   • Garantire una corretta messa a terra.
   • The fixture supports 120V-277V AC input.
   • Seal all conduit entries and the rear wire plug with weatherproof sealant to maintain the IP66 rating.
4. Fissare l'obiettivo:
   • Ensure the vandal-resistant polycarbonate textured opaque drop lens is securely fastened to the die-cast aluminum housing.
5. Ripristina alimentazione:
   • Una volta completata l'installazione e verificati tutti i collegamenti, ripristinare l'alimentazione tramite l'interruttore automatico.

5. Istruzioni per l'uso

The RAB VANLED20 is an automatic LED light fixture. Once properly installed and powered, it will illuminate. It does not feature manual on/off switches on the unit itself. Control is typically managed via the building's electrical circuit or an external remote control system, if integrated.

• Accensione: Ensure the circuit breaker supplying power to the fixture is in the "ON" position.
• Telecomando (opzionale): If your installation includes a compatible remote control system, refer to the instructions provided with that system for operation. The fixture itself supports remote control functionality.
• Potenza luminosa: The 20W LED provides cool 5000K illumination.

6. Manutenzione

The RAB VANLED20 LED Canopy Light Fixture is designed for minimal maintenance, offering a long operational life of up to 100,000 hours.

• Pulizia: Periodically clean the exterior of the fixture and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
• Ispezione: Annually inspect the fixture for any signs of damage, loose connections, or wear. Pay attention to the integrity of the housing and lens.
• LED: The integrated LED array is not user-serviceable. If the LEDs fail, the entire fixture typically requires replacement.

7. Risoluzione Dei Problemi

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support or a qualified electrician.

8. Specifiche

• Modello: VANLED20W
• Cosatage: 20W
• Sorgente luminosa: GUIDATO
• Temperatura del colore: 5000K (bianco freddo)
• Ingresso volumetage: 120V-277V CA
• Durata: 100,000 ore
• Materiale: Alloggiamento in alluminio pressofuso, lente in policarbonato
• Grado di protezione IP (Ingress Protection): IP66 (a tenuta di polvere e protetto contro potenti getti d'acqua)
• Elenco UL: Adatto per luoghi umidi
• Montaggio: Ceiling mount (recessed junction or direct surface)
• Peso: Circa 10.76 libbre (4.88 kg)
• Metodo di controllo: Remote (via external system) / Push Button (via external system)
• Codice UPC: 019813266299

9. Informazioni sulla garanzia

RAB Lighting products are backed by a comprehensive warranty. For specific warranty terms and conditions applicable to the VANLED20W fixture, please refer to the official RAB Lighting webo contattare l'assistenza clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

Note: The provided product data mentions optional protection plans (e.g., 4-Year Protection Plan). These are typically third-party plans and separate from the manufacturer's standard warranty.

10. Assistenza clienti

For technical assistance, replacement parts, or further information regarding your RAB VANLED20 20W LED Canopy Light Fixture, please contact RAB Lighting directly:

• Websito: www.rablighting.com
• Telefono: Fare riferimento all'illuminazione RAB websito per i numeri di contatto attuali.
• E-mail: Fare riferimento all'illuminazione RAB website for current contact email addresses.

When contacting support, please have your model number (VANLED20W) and purchase date available.