Legrand 138074 Manual Call Point Instruction Manual

1. Prodotto finitoview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

Figura 1: Fronte view of the Legrand 138074 Manual Call Point.

2. Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di installare o utilizzare questo dispositivo. Il mancato rispetto di queste istruzioni può causare danni materiali, lesioni o morte.

• Installazione professionale: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Disconnessione dell'alimentazione: Scollegare sempre l'alimentazione dal circuito prima di eseguire qualsiasi operazione di installazione, manutenzione o risoluzione dei problemi.
• Voltage Controllare: Verificare che l'alimentazione vol.tage corrisponde alle specifiche del dispositivo.
• Condizioni ambientali: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Integrità dei componenti: Non utilizzare il dispositivo se una qualsiasi parte risulta danneggiata.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti e integri all'apertura della confezione:

• Legrand 138074 Manual Call Point (1 unit)
• Viti di montaggio (quantità come fornito)
• Manuale di istruzioni (questo documento)

4. Configurazione e installazione

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Montaggio

1. Preparare la superficie di montaggio: Ensure the surface is clean, dry, and flat.
2. Segnare i punti di foratura: Use the call point's base as a template to mark the positions for mounting screws.
3. Fori di perforazione: Drill pilot holes appropriate for the mounting screws.
4. Proteggere la base: Attach the call point's base securely to the wall using the provided screws.

4.2. Cablaggio

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Assicurarsi che tutti i collegamenti siano sicuri e adeguatamente isolati.

Figura 2: Interno view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Assemblaggio finale

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Istruzioni per l'uso

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Attiva l'allarme: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Verify Activation: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Evacuare: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Manutenzione

Regular maintenance ensures the reliable operation of your manual call point.

• Ispezione visiva: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Pulizia: Clean the exterior of the call point with a soft, damp panno. Non usare detergenti abrasivi o solventi.
• Test funzionali: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Sostituzione dei componenti: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Risoluzione Dei Problemi

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Specifiche

9. Informazioni sulla garanzia

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Supporto e contatto

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand websito:

www.legrand.com

Quando contatti l'assistenza, tieni a portata di mano il numero di modello del tuo prodotto (138074) e tutti i dettagli rilevanti dell'acquisto.