1. Introduzione
Grazie per l'acquistoasing the HIOKI 3169 Clamp Power Meter. This instrument is designed for precise measurement of electrical parameters in various power systems. It allows for simultaneous measurement of demand and harmonics across multiple circuits, providing comprehensive data for analysis and monitoring.
This manual provides essential information for the safe and effective use of your HIOKI 3169. Please read it thoroughly before operation and keep it for future reference.
2. Informazioni sulla sicurezza
Always observe the safety precautions described in this manual to ensure safe operation and to prevent damage to the instrument or injury to personnel. Pay special attention to warnings and cautions.
- Do not attempt to measure current or power with the 3169 main unit alone. External clamp-on sensors are required.
- Garantire l'alimentazione voltage is within the specified range (AC 100V to 240V).
- Do not operate the instrument in wet environments or where explosive gases are present.
- Refer to the separate instruction manuals for any optional accessories used with this device.
3. Impostazione
3.1 Unpacking and Checking Accessories
Carefully unpack the instrument and verify that all accessories listed below are present and undamaged:
- Voltage cord L9438-53 ×1 (Black, Red, Yellow, Blue)
- Cavo di alimentazione × 1
- Grounding adapter ×1
- Manuale di istruzioni ×1
- Quick start manual ×1
- CD-R ×1 (RS-232C instruction)
- Input cord label ×1
Nota: The HIOKI 3169 main unit does not include clamp-on sensors for current and power measurement. These must be purchased separately according to your specific measurement requirements. A PC card is also required for data collection and automatic saving of measurement data.
3.2 Connecting Power and Sensors
Connect the provided power cord to the instrument and a suitable AC power outlet (100V to 240V, 50/60Hz). Connect the voltage cords to the appropriate terminals on the device and the circuit to be measured. Attach the optional clamp-on sensors to the current measurement points and connect them to the instrument.
Figure 1: HIOKI 3169 Clamp Power Meter connected with optional clamp-on sensors and voltage leads, ready for measurement. The main unit is shown with its display and control buttons, alongside the yellow clamp sensors and colored voltage cavi.
4. Istruzioni per l'uso
4.1 Funzionamento di base
Once powered on and sensors are connected, the HIOKI 3169 will display measurement data on its screen. The display updates approximately 2 times per second, providing near real-time readings.
Figura 2: primo piano view of the HIOKI 3169 Clamp Power Meter's display, showing various electrical parameters such as voltage, current, power, and frequency. The interface includes function buttons and navigation controls.
4.2 Measurement Items and Ranges
The instrument can measure the following items:
- Voltage (AC 150.00 to 600.00 V, 3 ranges)
- Current (AC 500.00 mA to 5.0000 kA, range varies by sensor)
- Active Power, Reactive Power, Apparent Power
- Energia attiva, energia reattiva
- Fattore di potenza
- Frequenza
- Harmonics (up to 40th order)
The power range (75.000 W to 900.00 kW) is determined by the combination of the selected voltage/current range and measurement line configuration.
4.3 Recording and Data Storage
Measurement data can be automatically saved to a PC card. The recording interval can be set as follows:
- Standard: 1 to 30 seconds, 1 to 60 minutes (13 settings)
- A breve termine: 1 cycle / 0.1 / 0.2 / 0.5 seconds (for instantaneous values only)
4.4 Funzioni
The HIOKI 3169 includes several useful functions:
- Wiring Error Check: Helps identify incorrect wiring configurations.
- Display Language Switching: Allows changing the display language.
- Funzione di mantenimento del display: Blocca le letture correnti del display.
- Funzione di backup: Preserves settings and data in case of power loss.
- potere fuoritage Processing: Manages data integrity during unexpected power interruptions.
- Funzione di blocco tasti: Impedisce modifiche accidentali alle impostazioni.
- D/A Output (-01 specification): Provides 4-channel analog output of measurement items (DC ±5V f.s.).
5. Manutenzione
To ensure the longevity and accuracy of your HIOKI 3169, follow these maintenance guidelines:
- Pulizia: Pulire lo strumento con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
- Magazzinaggio: Store the instrument in a clean, dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Calibrazione: Per mantenere la precisione delle misurazioni, si consiglia di effettuare una calibrazione regolare da parte di personale qualificato.
6. Risoluzione Dei Problemi
If you encounter issues with your HIOKI 3169, refer to the following common troubleshooting steps:
- Nessun potere: Check the power cord connection and the power outlet. Ensure the power supply voltage è corretta.
- Letture errate: Verificare che la clamp-on sensors are correctly attached and the voltage leads are properly connected. Check the measurement range settings.
- Data Not Saving: Ensure a compatible PC card is inserted correctly and has sufficient free space.
For persistent issues or complex problems, please contact HIOKI customer support or your local distributor for assistance.
7. Specifiche
| Parametro | Descrizione |
|---|---|
| Modello | 3169 |
| Linee di misura | Single-phase 2-wire (4 circuits), Single-phase 3-wire (2 circuits), Three-phase 3-wire (2 or 1 circuit), Three-phase 4-wire (1 circuit) *50/60Hz, by same voltage sistema |
| Articoli di misurazione | Voltage, Current, Active/Reactive/Apparent Power, Active/Reactive Energy, Power Factor, Frequency, Harmonics (up to 40th order) |
| Voltage Gamma | AC 150.00 to 600.00 V, 3 ranges |
| Intervallo attuale | AC 500.00 mA to 5.0000 kA (Measurement range varies depending on the sensor used) |
| Intervallo di potenza | 75.000 W to 900.00 kW (Determined by combination of voltage/current range and measurement line) |
| Basic Accuracy (Voltage) | ±0.2% lett. ±0.1% fs |
| Basic Accuracy (Current) | ±0.2% rdg. ±0.1% f.s. + Current sensor accuracy |
| Basic Accuracy (Active Power) | ±0.2% rdg. ±0.1% f.s. + Current sensor accuracy (Power factor=1) |
| Metodo di misurazione | Digitaleampling method, PLL synchronization or 50/60Hz fixed clock |
| Tasso di aggiornamento del display | Approx. 2 times/s (Excluding PC card access, RS-232C communication) |
| Intervallo di registrazione | Standard: 1 to 30 seconds, 1 to 60 minutes (13 settings); Short-term: 1 cycle/0.1/0.2/0.5 seconds (Instantaneous values only) |
| Caratteristiche di frequenza | For fundamental wave frequency 45Hz to 66Hz, up to 50th harmonic of fundamental wave ±3% f.s. + [Measurement accuracy] |
| Alimentazione elettrica | AC 100V to 240V, 50/60Hz, 30VA max. |
| Dimensioni | 210 W × 160 H × 60 D mm |
| Massa | 1.2 kg |
| Accuracy Guaranteed Period | 1 year (1 year after adjustment) |
8. Garanzia e supporto
L'HIOKI 3169 Clamp Power Meter comes with an accuracy guaranteed period of 1 year from the date of purchase (or 1 year after adjustment). For warranty claims, technical support, or service, please contact your authorized HIOKI distributor or visit the official HIOKI websito per le informazioni di contatto.
Si prega di conservare la ricevuta d'acquisto come prova d'acquisto ai fini della garanzia.
