1. Introduzione
Questo manuale fornisce istruzioni dettagliate per l'installazione, il funzionamento e la manutenzione del vostro Webasto 1533 Digital Timer. This timer is designed to control Webasto Thermo Top C heaters, allowing for convenient pre-programming of heating cycles. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Informazioni sulla sicurezza
- Always ensure the vehicle's power supply is disconnected before attempting any installation or maintenance.
- Installation should ideally be performed by a qualified technician to prevent damage to the device or vehicle.
- Do not expose the timer to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Utilizzare solo genuino Webasto pezzi di ricambio e accessori.
3. Prodotto finitoview
IL Webasto 1533 Digital Timer is an oval-shaped control unit featuring an LCD display and intuitive buttons for setting time and programming heating functions. It allows users to schedule heater operation in advance.
Figura 3.1: Davanti view del Webasto 1533 Digital Timer, showing the oval shape, LCD display with '7:30' and a flame icon, and control buttons (up, down, set, flame/heater icon, fan icon).
Figura 3.2: IL Webasto 1533 Digital Timer displayed with its original packaging, a foam gasket, and a mounting screw. The packaging indicates multilingual labels for 'Digital timer 1533'.
4. Installazione e configurazione
IL Webasto 1533 Digital Timer is designed for integration with your vehicle's Webasto Thermo Top C heating system. Proper installation is crucial for optimal performance.
4.1 Montaggio del timer
- Select a suitable location within the vehicle cabin that is easily accessible to the driver and away from direct heat or moisture.
- Ensure there is sufficient space behind the mounting surface for the electrical connector.
- Use the provided mounting screw to secure the timer in place.
4.2 Collegamento elettrico
The timer connects to the heater control unit via a dedicated wiring harness (not included, may need to be purchased separately). Refer to your heater's installation manual for specific wiring diagrams.
Figura 4.1: Posteriore view del Webasto 1533 Digital Timer, showing the product label with model number '1322580A' and the 4-pin electrical connector.
Figura 4.2: Close-up of the 4-pin electrical connector on the rear of the Webasto 1533 Digital Timer, highlighting the gold-plated pins for connection to the wiring harness.
- Connect the 4-pin connector from the wiring harness to the corresponding port on the back of the timer. Ensure a secure fit.
- Once connected, restore power to the vehicle. The timer display should illuminate.
4.3 Impostazione dell'orologio
- Premere il tasto IMPOSTATO pulsante. Le cifre dell'ora lampeggeranno.
- Utilizzare il < E > pulsanti per regolare l'ora.
- Premere IMPOSTATO di nuovo. Le cifre dei minuti lampeggeranno.
- Utilizzare il < E > pulsanti per regolare i minuti.
- Premere IMPOSTATO una terza volta per confermare l'ora.
5. Istruzioni per l'uso
5.1 Manual Heater Activation
To manually turn on the heater, press the flame/heater icon button. The heater will start and operate for a preset duration (typically 30 minutes, adjustable via heater settings).
5.2 Programming a Heating Time
The timer allows you to program up to three different start times for your heater.
- Premere il tasto IMPOSTATO button repeatedly until 'P1' (Program 1) appears on the display.
- Premere IMPOSTATO again. The hour digits for P1 will flash.
- Utilizzare il < E > buttons to set the desired hour.
- Premere IMPOSTATO. The minute digits for P1 will flash.
- Utilizzare il < E > buttons to set the desired minutes.
- Premere IMPOSTATO to confirm P1.
- Repeat steps 1-6 for P2 and P3 if additional programs are desired.
- To activate a program, press the flame/heater icon button until the desired program (P1, P2, or P3) is displayed and the flame icon is solid. The heater will start at the programmed time.
5.3 Deactivating a Program
To deactivate an active program, press the flame/heater icon button until the flame icon disappears from the display.
6. Manutenzione
IL Webasto 1533 Digital Timer requires minimal maintenance.
- Pulizia: Pulisci il display e casing con un morbido, damp panno. Non usare detergenti abrasivi o solventi.
- Batteria: The timer does not contain user-replaceable batteries for its primary function. Power is supplied by the vehicle's electrical system.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il display è vuoto | Nessuna alimentazione; collegamento allentato | Check vehicle's power supply and timer's electrical connection. |
| Heater does not start at programmed time | Program not activated; incorrect time setting; heater fault | Ensure program is active (flame icon solid). Verify current time and programmed time. Check heater for other faults. |
| I pulsanti non rispondono | Problema software temporaneo; danno fisico | Disconnect and reconnect power to reset. If problem persists, contact technical support. |
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Webasino |
| Numero di modello | 1322580A |
| Riscaldatori compatibili | Webasto Thermo Top C (12V) |
| Dimensioni (L x P x A) | Dimensioni: 11.2 x 8.1 x 3.8 cm |
| Peso dell'articolo | 98 grammi |
| Alimentazione elettrica | 12V (from vehicle) |
9. Garanzia e supporto
Questo Webasto 1533 Digital Timer is a genuine Webasto part, ensuring quality and compatibility with your heating system. For warranty information, please refer to the documentation provided with your original heater or contact your Webcome rivenditore.
Technical support is available for assistance with installation, operation, or troubleshooting. Please contact your authorized Webasto service partner or visit the official Webasino websito per i dettagli di contatto dell'assistenza.
