Xanlite Pack3SEL345CWD Dimmable LED Ceiling Spotlight Kit (3-Pack)

Introduzione

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Xanlite Pack3SEL345CWD Dimmable LED Ceiling Spotlight Kit. This kit includes three recessed LED spotlights designed to provide neutral white light (4000 Kelvin) with dimming capabilities. Each spotlight consumes 6W, equivalent to a 50W incandescent bulb, and offers a luminous flux of 345 lumens with a lifespan of 25,000 hours.

Immagine: Oltreview of the Xanlite Pack3SEL345CWD kit, showing three spotlights and key features like dimmability, 50W equivalent, 4000 Kelvin color temperature, 25,000-hour lifespan, 36-degree beam angle, and 60mm diameter.

Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima dell'installazione e dell'uso. Il mancato rispetto di queste istruzioni può causare scosse elettriche, incendi o altri pericoli.

• Scollegare l'alimentazione: Always ensure the main power supply is switched off at the circuit breaker before attempting any installation, maintenance, or cleaning.
• Installazione professionale: L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutti i codici e le normative elettriche locali.
• Voltage Compatibilità: Assicurare il volumetage supply matches the requirements of the spotlights.
• Evitare l'acqua: Do not install in areas where direct contact with water is possible unless the product is specifically rated for such environments.
• Dissipazione del calore: Ensure adequate ventilation around the spotlight to prevent overheating. Do not cover the fixture with insulating material unless specifically designed for it.
• Nessuna parte riparabile dall'utente: Do not attempt to open or repair the spotlight. There are no user-serviceable parts inside.

Contenuto della confezione

Verificare che tutti i componenti siano presenti nella confezione:

• 3 x Xanlite Pack3SEL345CWD LED Ceiling Spotlights
• 1 x Manuale di istruzioni (questo documento)

Specifiche

Image: Technical diagram illustrating the dimensions of the spotlight, showing a diameter of 60mm and a height of 86mm, with a mounting depth of 35mm.

Image: Energy efficiency label for the Xanlite PACK3SEL345CWD, indicating an energy class of E and an energy consumption of 18 kWh/1000h. For more details, refer to the Banca dati EPREL.

Configurazione e installazione

Importante: Prima di iniziare l'installazione, assicurarsi che l'alimentazione sia scollegata dall'interruttore principale.

1. Preparare il foro di montaggio: Cut a circular hole in the ceiling with the appropriate diameter (refer to the dimensions in the specifications section, typically around 60mm). Ensure there is sufficient clearance above the ceiling for the spotlight housing.
2. Cablaggio: Connect the electrical wires from your ceiling to the terminal block of the spotlight. Ensure correct polarity (Live, Neutral, Earth) as per local electrical codes. Use appropriate connectors.
3. Assicurati i riflettori: Fold back the spring clips on the sides of the spotlight. Insert the spotlight into the prepared ceiling hole. The spring clips will automatically expand and hold the spotlight firmly in place against the ceiling.
4. Ripristina alimentazione: Once all spotlights are securely installed and wired, restore power at the main circuit breaker.

Immagine: Primo piano frontale view of a single Xanlite LED spotlight, showing the central LED and the surrounding white bezel.

Immagine: Lato A view of the Xanlite LED spotlight, highlighting the red spring clips used for securing the fixture into the ceiling opening.

Istruzioni per l'uso

The Xanlite Pack3SEL345CWD spotlights are designed for simple operation.

• Accensione/spegnimento: Use your standard wall switch to turn the spotlights on or off.
• Funzione di attenuazione: If connected to a compatible dimmer switch, you can adjust the light intensity by operating the dimmer control. Ensure your dimmer switch is suitable for LED lighting.

Image: A bedroom setting illuminated by multiple Xanlite LED spotlights, demonstrating the neutral white light (4000 Kelvin) and the focused 36-degree beam angle.

Manutenzione

These LED spotlights require minimal maintenance.

• Pulizia: Scollegare l'alimentazione prima della pulizia. Utilizzare un panno morbido, asciutto o leggermenteamp cloth to wipe the surface of the spotlight. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Sostituzione della lampadina: The LED light source is integrated and not user-replaceable. The product is designed for a long lifespan of 25,000 hours.

Risoluzione dei problemi

If you encounter issues with your spotlights, refer to the following common problems and solutions:

• La luce non si accende:
  • Controllare che l'alimentazione principale sia attiva.
  • Verificare che l'interruttore a parete sia in posizione "ON".
  • Inspect the wiring connections to ensure they are secure. (Only if you are a qualified electrician)
  • Controllare l'interruttore automatico per verificare che il fusibile non sia scattato.
• La luce tremola o si attenua in modo errato:
  • Ensure your dimmer switch is compatible with LED lighting. Some older dimmers may not work correctly with LEDs.
  • Controllare che i collegamenti dei cavi non siano allentati.Only if you are a qualified electrician)

Se i problemi persistono dopo aver provato queste soluzioni, contattare l'assistenza clienti.

Garanzia e supporto

This Xanlite product is covered by a manufacturer's warranty. Please refer to the warranty documentation provided with your purchase for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Xanlite customer service through their official websito o rivenditore presso cui è stato acquistato il prodotto.