1. Introduzione
This manual provides essential information for the safe and efficient use of the ABB Indicator Light with Green Diffuser, model 2CSK1313CH. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent damage or injury.
2. Informazioni sulla sicurezza
AVVERTIMENTO:
- L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutti i codici elettrici locali e nazionali.
- Ensure power is disconnected at the main circuit breaker before installation, maintenance, or troubleshooting.
- Non utilizzare il dispositivo se è danneggiato.
- This product is designed for specific electrical applications. Do not use it for purposes other than its intended use.
3. Prodotto finitoview
The ABB Indicator Light with Green Diffuser (Model 2CSK1313CH) is a signaling device designed for various electrical panels and control systems. It provides visual indication of system status, power presence, or operational states.
Figura 3.1: Fronte view of the ABB Indicator Light with Green Diffuser. The image shows a rectangular white module with a prominent circular green light diffuser in the center.
Componenti inclusi:
- 1 x ABB Indicator Light with Green Diffuser (Model 2CSK1313CH)
4. Configurazione e installazione
Per una corretta installazione, seguire questi passaggi:
- Disconnessione dell'alimentazione: Before beginning any installation, ensure that the main power supply to the circuit where the indicator light will be installed is completely disconnected. Verify with a voltagetester.
- Montaggio: The indicator light is designed for panel mounting. Insert the device into the designated opening in the control panel. Ensure it is securely fastened according to the panel's specifications.
- Cablaggio: Connect the electrical wires to the terminals of the indicator light. Refer to the wiring diagram provided with your specific electrical panel or system for correct polarity and voltage requirements. Ensure all connections are tight and secure.
- Verifica: Double-check all connections to ensure they are correct and secure.
- Ripristino dell'energia: Una volta completata e verificata l'installazione, ripristinare l'alimentazione al circuito.
Note: This device does not require batteries for operation.
5. Istruzioni per l'uso
The ABB Indicator Light with Green Diffuser operates as a visual signal. Once properly installed and connected to a power source, the green diffuser will illuminate when power is supplied to its terminals, indicating the status it is wired to monitor (e.g., power ON, system active, etc.).
- Funzione: Provides a clear visual indication (green light) when activated.
- Attivazione: The light illuminates when the specified voltage is applied to its input terminals.
- Disattivazione: The light turns off when the voltage viene rimosso.
6. Manutenzione
The ABB Indicator Light is designed for minimal maintenance. Regular inspection is recommended to ensure continued reliable operation.
- Pulizia: If the diffuser or housing becomes dirty, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ispezione: Periodically check for any signs of physical damage, loose connections, or discoloration. If any issues are observed, disconnect power and address them immediately.
- Lamp Sostituzione: This unit typically uses an integrated LED or long-life lamp. If the light fails to illuminate, it may indicate a fault with the unit itself or the power supply. Replacement of internal components is generally not user-serviceable.
7. Risoluzione Dei Problemi
If the indicator light is not functioning as expected, refer to the following common issues and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non illumina. | Nessuna alimentazione elettrica all'unità. | Check the circuit breaker and wiring connections. Ensure power is supplied to the correct terminals. |
| La luce tremola o è fioca. | Alimentazione instabile o collegamento allentato. | Verify power supply stability. Tighten all wiring connections. |
| Danni fisici all'unità. | Urto o manipolazione impropria. | Replace the damaged unit. Do not attempt to repair. |
If the problem persists after attempting these solutions, contact qualified personnel or ABB customer support.
8. Specifiche
| Attributo | Valore |
|---|---|
| Marca | FIGURA |
| Numero di modello | 2CSK1313CH |
| Dimensioni del prodotto | Dimensioni: 5.1 x 10.6 x 8.6 cm |
| Peso dell'articolo | 150 grammi |
| Colore | White (with Green Diffuser) |
| Batterie richieste | NO |
| Codice EAN (codice articolo) | 8012542006152 |
9. Informazioni sulla garanzia
For warranty details, please refer to the official ABB weboppure contattare il distributore ABB locale. Conservare la ricevuta d'acquisto come prova d'acquisto.
10. Assistenza clienti
For technical assistance, product inquiries, or service, please visit the official ABB website or contact their customer support line. Contact information can typically be found on the ABB corporate websito o sulla confezione del prodotto.
This manual is subject to change without notice. The latest version can be found on the manufacturer's websito.
