Manuale utente Huawei ETS1162 3G GSM Voice Box Link

1. Introduzione

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Huawei ETS1162 3G GSM Voice Box Link. This device converts a mobile SIM card signal into a fixed-line telephone connection, allowing you to use standard analog telephones or telecare systems with a GSM network.

Figura 1: Fronte view of the Huawei ETS1162 device. This image shows the top surface of the black, square-shaped device with the Huawei logo centrally placed and a single, upright antenna.

2. Contenuto della confezione

Si prega di verificare che tutti gli articoli siano presenti nel pacco:

• Huawei ETS1162 3G GSM Voice Box Link unit
• Adattatore di alimentazione
• Antenna
• Manuale dell'utente (questo documento)
• Note: Telephone connection cables may not be included and might need to be sourced separately.

3. Istruzioni per l'installazione

Follow these steps to set up your Huawei ETS1162 device.

3.1. Inserimento della scheda SIM

1. Assicurarsi che il dispositivo sia spento e scollegato dalla fonte di alimentazione.
2. Individua lo slot della scheda SIM, solitamente sul lato o nella parte inferiore del dispositivo.
3. Insert your 3G GSM SIM card into the slot. Ensure the SIM card's PIN code has been disabled prior to insertion. This can usually be done by inserting the SIM card into a mobile phone and disabling the PIN request through the phone's security settings.
4. Spingere delicatamente la scheda SIM finché non scatta in posizione.

3.2. Collegamento dell'antenna

Screw the provided antenna into the designated antenna port on the rear of the device. Ensure it is securely fastened for optimal signal reception.

3.3. Connecting Telephones/Devices

Figure 2: Rear ports of the Huawei ETS1162. This image displays the back panel of the device, highlighting the power input, two RJ11 telephone ports (labeled C1 and C2), a USB port (labeled NO DATA), and the antenna connection point.

The Huawei ETS1162 typically features two RJ11 ports (often labeled C1 and C2) for connecting analog telephones or telecare systems.

1. Connect your analog telephone(s) or telecare system(s) to the RJ11 ports on the rear of the ETS1162 using standard telephone cables.
2. You can connect one or two devices as needed. For example, one port can be used for a telephone and the other for a telecare system.

3.4. Accensione del dispositivo

1. Connect the power adapter to the power input port on the rear of the ETS1162.
2. Collegare l'adattatore di corrente a una presa a muro.
3. Press the power button (if available) or the device will power on automatically.
4. Observe the indicator lights on the device. A stable signal light indicates successful network connection.

4. Istruzioni per l'uso

Once the device is set up and connected to the GSM network, you can use your connected analog telephone as you would a standard landline.

4.1. Effettuare chiamate

• Pick up the handset of your connected telephone.
• You should hear a dial tone.
• Componi il numero di telefono desiderato.
• The call will be routed through the GSM network using your inserted SIM card.

4.2. Ricezione delle chiamate

• When a call comes in, your connected telephone will ring.
• Sollevare il ricevitore per rispondere alla chiamata.

4.3. Spie luminose

Refer to the device's indicator lights for status information:

• Indicatore di alimentazione: Indica se il dispositivo è acceso.
• Indicatore di segnale: Shows the strength of the GSM network signal. A solid light typically means a good signal. A blinking light or no light may indicate a weak signal or no network connection.
• Indicatore di stato: May indicate call activity or other operational states. Consult the specific device labeling for details.

5. Manutenzione

To ensure the longevity and optimal performance of your Huawei ETS1162, follow these maintenance guidelines:

• Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno del dispositivo. Non utilizzare detergenti liquidi o materiali abrasivi.
• Posizionamento: Place the device in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure it is placed in an area with good GSM signal reception.
• Antenna: Do not bend or forcefully remove the antenna. Ensure it is positioned vertically for best signal.
• Alimentazione elettrica: Utilizzare solo l'adattatore di alimentazione originale fornito con il dispositivo.
• Aggiornamenti software: While this device typically does not require frequent user-initiated software updates, ensure it is connected to a stable power source if any updates are prompted by your service provider.

6. Risoluzione Dei Problemi

If you encounter issues with your Huawei ETS1162, refer to the following troubleshooting tips:

6.1. No Dial Tone or Cannot Make Calls

• Controlla la scheda SIM: Ensure the SIM card is correctly inserted and its PIN code has been disabled.
• Potenza del segnale: Check the signal indicator light. If it's off or blinking, the device may not have a strong enough GSM signal. Try repositioning the device or antenna.
• Energia: Verify the device is powered on and the power adapter is securely connected.
• Telephone Connection: Ensure your analog telephone is correctly plugged into one of the RJ11 ports.
• SIM Card Validity: Confirm your SIM card is active and has sufficient credit or an active plan.

6.2. Intermittent Signal or "Red Light" Issue

Some users have reported intermittent signal loss or a "red light" indicator, particularly with certain network providers.

• Riavvia dispositivo: If you experience a persistent red light or loss of signal, try disconnecting the power, waiting 10-15 seconds, and then reconnecting the power. This can often resolve temporary network issues.
• Posizione dell'antenna: Adjust the antenna's position to optimize signal reception.
• Posizione: Move the device to a location with better cellular coverage.
• Fornitore di rete: If issues persist, contact your mobile network provider to inquire about network coverage in your area or potential SIM card issues.

6.3. No Incoming Calls

• Scheda SIM: Ensure the SIM card is active and can receive calls on a mobile phone.
• Stato del dispositivo: Check the device's indicator lights to confirm it is powered on and has a stable network connection.
• Inoltro di chiamata: Verify that no call forwarding is active on your SIM card that would redirect incoming calls away from the device.

7. Specifiche

8. Garanzia e supporto

As a refurbished product, this Huawei ETS1162 device is typically covered by the Amazon Renewed Guarantee. This guarantee ensures that if you are not satisfied with your purchase, renewed products are eligible for replacement or refund.

• For specific warranty details and to initiate a claim, please refer to the Amazon Renewed program terms and conditions or contact Amazon customer service directly.
• For technical support related to the device's functionality, please contact the seller or Huawei customer support.

9. Informazioni sulla sicurezza

• Non esporre il dispositivo a temperature estreme, umidità o luce solare diretta.
• Tenere il dispositivo lontano dall'acqua e da altri liquidi.
• Non tentare di aprire o riparare il dispositivo da soli. Per qualsiasi intervento di assistenza, rivolgersi a personale qualificato.
• Smaltire il dispositivo e i suoi componenti in modo responsabile, nel rispetto delle normative locali.