1. Introduzione
This manual provides instructions for the installation, operation, and maintenance of the Seco-Larm SL-1301-SAQ/R Enforcer LED Strobe Light with Built-In 100dB Programmable Siren. This device is designed to provide visual and audible alerts in various applications, featuring a durable, weather-resistant design and flexible programming options.
An image showing the red Seco-Larm SL-1301-SAQ/R LED Strobe Light. The device features a clear red dome over an array of bright LEDs, mounted on a black base. The base includes product labeling.
2. Informazioni importanti sulla sicurezza
WARNING: This device is not intended to be used as a visual public mode alarm notification appliance. It is designed for supplementary or specific application signaling.
- Leggere attentamente tutte le istruzioni prima dell'installazione e del funzionamento.
- Prima di effettuare qualsiasi installazione o manutenzione, assicurarsi che l'alimentazione sia scollegata.
- Installation should be performed by qualified personnel in accordance with all local electrical codes and regulations.
- Non esporre il dispositivo a umidità eccessiva o a temperature estreme oltre l'intervallo operativo specificato.
- Verify correct wiring polarity to prevent damage, although the unit features reverse polarity protection.
3. Installazione
The SL-1301-SAQ/R is designed for simple 2-wire installation and surface mounting. Its weather-resistant construction allows for both indoor and outdoor use.
3.1 Montaggio
- Select a suitable mounting location that provides optimal visibility for the strobe light and audibility for the siren.
- Assicurarsi che la superficie di montaggio sia stabile e in grado di sostenere il dispositivo.
- Secure the device to the chosen surface using appropriate fasteners (not included).
3.2 Cablaggio
The unit operates on 10~24 VAC/VDC. It features a simple 2-wire connection.
- Connect the positive (+) wire from your power source to the RED wire of the strobe light.
- Connect the negative (-) wire from your power source to the BLACK wire of the strobe light.
- Assicurarsi che tutti i collegamenti siano sicuri e isolati per evitare cortocircuiti.
- The device includes reverse polarity protection to prevent damage from incorrect wiring, but proper connection is always recommended.
4. Funzionamento
The SL-1301-SAQ/R features multiple flashing options and an adjustable siren.
4.1 Flashing Options
The strobe light offers 6 different flashing patterns. The flashing speed is adjustable from 30 to 260 times per minute. Refer to the specific programming instructions provided with the product packaging for detailed steps on how to select patterns and adjust speed.
4.2 Programmable Siren
A built-in 100dB siren can be programmed for various alert scenarios. Consult the product's specific programming guide for instructions on siren activation and sound pattern selection.
4.3 Backup Battery Functionality
The device supports a backup battery for continuous operation during power interruptions. With a backup battery, the unit can provide continuous lighting for up to 2 hours or strobe flashing for up to 2 hours. Ensure a compatible backup battery is connected as per the product's wiring diagram.
5. Manutenzione
The Seco-Larm SL-1301-SAQ/R is designed for minimal maintenance due to its durable construction and LED technology.
- Pulizia: Pulire periodicamente la lente con un panno morbido eamp cloth to ensure maximum light output. Avoid abrasive cleaners.
- Ispezione: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening.
- Durata del LED: The LEDs have an operating life of over 50,000 hours (approximately 5.7 years), reducing the need for frequent bulb replacement.
6. Risoluzione Dei Problemi
If the strobe light or siren is not functioning as expected, consider the following:
- No Light/Siren:
- Check the power supply to ensure it is within the 10~24 VAC/VDC operating range.
- Verificare che tutti i collegamenti elettrici siano sicuri e correttamente polarizzati.
- Assicurarsi che il dispositivo sia alimentato.
- Incorrect Flashing Pattern/Siren Sound:
- Review the programming instructions to ensure the desired pattern or sound is correctly selected.
- Funzionamento intermittente:
- Controllare che i collegamenti dei cavi non siano allentati o che l'alimentazione elettrica sia intermittente.
- Inspect for any physical damage to the unit or wiring.
If issues persist, contact Seco-Larm technical support for further assistance.
7. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | SL-1301-SAQ/R |
| Volume di eserciziotage | 10~24 V CA/V CC |
| Assorbimento corrente (massimo) | 90~550mA |
| Numero di modelli Flash | 6 |
| Velocità lampeggiante | Adjustable 30~260 times/min |
| Vertical LED Strips | 10 |
| Numero totale di LED | 54 |
| Backup Battery Support | Yes (Steady ON - Up to 2 hours; Strobe flashing - Up to 2 hours) |
| Temperatura di esercizio | -4°~144°F (-20°~65°C) |
| Protezione elettrica | Protezione da inversione di polarità |
| Sirena incorporata | Yes - 100dB |
| Operating Life (LEDs) | Oltre 50,000 ore (oltre 5.7 anni) |
| Grado di protezione IP | IP55 (Weather resistant) |
| Dimensioni | 3-15/16" x 2-29/32" (100 x 74 mm) |
| Colore | Rosso |
| Materiale | Glass (Lens) |
| Tipo di sorgente luminosa | Diodo ad emissione luminosa |
| Tipo di montaggio | Montaggio in superficie |
| Peso dell'articolo | 8.8 once |
8. Garanzia e supporto
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Seco-Larm websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.
