Acme Lancaster Queen Bed Instruction Manual

1. Prodotto finitoview

The Acme Lancaster Queen Bed is designed to provide a stylish and functional sleeping solution. This bed features a PU padded headboard with an espresso finish, complementing various bedroom decors. The construction emphasizes durability, making it a reliable addition to your home.

Figure 1: Assembled Acme Lancaster Queen Bed.

This image displays the fully assembled Acme Lancaster Queen Bed, showcasing its espresso finish frame and the dark, padded headboard. The bed is shown without bedding, highlighting its structural design.

2. Informazioni sulla sicurezza

• Leggere attentamente tutte le istruzioni prima del montaggio e dell'uso.
• Tenere tutte le parti hardware fuori dalla portata dei bambini.
• Assicurarsi che tutti i bulloni e le viti siano ben serrati prima dell'uso. Controllare periodicamente e serrare nuovamente se necessario.
• Do not use power tools for assembly unless specifically instructed, as over-tightening can damage components.
• Assemble the bed on a soft, clean surface (e.g., carpet) to prevent scratching.
• Two people are recommended for assembly to ensure safety and ease of handling.
• This bed requires a box spring for proper mattress support.

3. Contenuto della confezione

Prima di iniziare il montaggio, verificare che tutti i componenti elencati di seguito siano presenti. Se qualche componente risulta mancante o danneggiato, contattare l'assistenza clienti.

• Testiera (1)
• Pedana (1)
• Sponde laterali (2)
• Slats (5)
• Supporting Legs for Slats (5)
• Pacchetto hardware (bulloni, rondelle, dadi, chiave a brugola)

4. Istruzioni per l'installazione e il montaggio

Assembly requires two adults. Please follow these steps carefully.

1. Disimballare i componenti: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify each component using the parts list.
2. Fissare le guide laterali alla testiera: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts, washers, and nuts. Do not fully tighten at this stage.
3. Fissare le guide laterali alla pedana: Repeat the previous step to attach the other end of the side rails to the footboard. Ensure the footboard's low profile and beveled raised panels are facing the correct direction.
4. Stringere tutti i collegamenti: Once all four corners are connected, carefully tighten all bolts using the provided Allen wrench. Ensure the bed frame is stable and square.
5. Install Slats and Supporting Legs: Place the five slats evenly across the width of the bed frame, resting them on the side rail ledges. Attach the five supporting legs to the center of each slat, ensuring they are firmly in place and make contact with the floor for central support.
6. Controllo finale: Verify that all connections are secure and the bed frame is stable before placing a mattress or box spring on it.

Figure 2: Assembled bed frame in a bedroom setting.

This image shows the Acme Lancaster Queen Bed fully assembled, positioned in a bedroom alongside a matching nightstand. It illustrates the bed's appearance once set up.

5. Istruzioni per l'uso

• Box Spring Requirement: This bed is designed to be used with a box spring. Place your queen-sized box spring directly onto the installed slats.
• Posizionamento del materasso: After placing the box spring, position your queen-sized mattress on top of the box spring.
• Distribuzione del peso: Ensure weight is distributed evenly across the bed. Avoid standing or jumping on the bed to prevent damage to the frame or slats.

6. Manutenzione e cura

• Pulizia del telaio: Wipe the espresso finish frame with a soft, damp panno. Evitare prodotti chimici aggressivi o detergenti abrasivi, poiché possono danneggiare la finitura.
• Pulizia della testiera: The PU padded headboard should be cleaned using a dry cloth only. For spills, blot immediately with a clean, dry cloth. Do not use water or liquid cleaners, as per "Dry Clean Only" instruction for the furniture finish.
• Controllo hardware: Controllare periodicamente tutti i bulloni e le viti per assicurarsi che siano ben serrati. Serrarli nuovamente se necessario per mantenere la stabilità.
• Evitare la luce solare diretta: Prolonged exposure to direct sunlight can cause fading or damage to the finish and upholstery.

7. Risoluzione Dei Problemi

• Il letto è traballante: Ensure all bolts connecting the headboard, footboard, and side rails are fully tightened. Check that the supporting legs for the slats are making firm contact with the floor.
• Rumori stridenti: Squeaking can often be resolved by re-tightening all hardware. If the issue persists, check for any friction points between the box spring/mattress and the frame.
• Parti mancanti: If any parts are missing upon unboxing, do not proceed with assembly. Contact Acme customer support immediately for replacement parts.

8. Specifiche

9. Garanzia e supporto

For warranty information or assistance with your Acme Lancaster Queen Bed, please contact Acme Furniture customer support. Keep your purchase receipt and model number (AC-24570Q) handy when contacting support.

Acme Furniture Customer Support:

• Fare riferimento alle informazioni di contatto fornite con la documentazione di acquisto.
• Visita il sito ufficiale di Acme Furniture websito per i dettagli di supporto più aggiornati.