Manuale utente dell'interfaccia dati Axxess GM con SWC (AX-GMCL2-SWC)

Introduzione

The Axxess AX-GMCL2-SWC Data Interface is designed for aftermarket head unit installations in select GM vehicles from 2000 to 2013. This interface provides essential functionalities such as accessory power, retention of Retained Accessory Power (RAP), chimes, steering wheel audio controls, and the factory auxiliary input. It also ensures the retention of OnStar and original equipment (OE) Bluetooth capabilities. This unit is compatible with both non-amplificato e analogico/digitale amplified vehicle models.

Contenuto della confezione

Axxess GM Data Interface (AX-GMCL2-SWC)
Vehicle-specific wiring harnesses
Manuale di istruzioni (questo documento)

Axxess AX-GMCL2-SWC Data Interface module and various wiring harnesses

Image: The Axxess AX-GMCL2-SWC data interface module (black box) and the accompanying wiring harnesses, including vehicle-specific connectors, RCA cables, and bare wire leads for various connections.

Configurazione e installazione

Installation of the AX-GMCL2-SWC requires careful attention to wiring connections. It is recommended that installation be performed by a qualified professional.

Compatibilità

This interface is designed for specific GM vehicles manufactured between 2000 and 2013. Verify your vehicle's compatibility before proceeding with installation.

Collegamenti elettrici

Connect the provided wiring harnesses to your aftermarket head unit and the vehicle's factory wiring. Key connections include:

Potenza accessoria: Provides a 12-volt 10-amp uscita accessoria.
NAV Outputs: Includes outputs for parking brake, reverse, mute, and speed sense signals, essential for navigation-equipped head units.
Controllo del volante (SWC): Connect the SWC wire(s) to your aftermarket radio's steering wheel control input. Refer to your radio's manual for specific wiring.
Collegamenti audio: Ensure proper connections for audio signals, including retention of balance and fade.
Modulo carillon: The interface integrates with the vehicle's chime system. Adjust chime volume using the potentiometer on the module if available.

Always consult the detailed wiring diagram provided with your specific product packaging for precise color-coded connections.

Configurazione iniziale

After all connections are made, follow the specific power-up and programming sequence outlined in the product's included quick-start guide to ensure proper communication between the interface and your aftermarket radio. This typically involves turning the ignition on and off in a specific pattern.

Istruzioni per l'uso

Once installed and configured, the AX-GMCL2-SWC enables the following retained features:

Comandi al volante: Operate volume, track/station, mode, and other functions directly from your vehicle's steering wheel buttons.
Potenza accessoria trattenuta (RAP): The radio will remain on for a short period after the ignition is turned off, until a door is opened, mimicking factory behavior.
Vehicle Chimes: All factory warning chimes (e.g., seatbelt, door ajar) will be reproduced through the aftermarket audio system.
OnStar and OE Bluetooth: If your vehicle is equipped, these features will continue to function through the interface.
Factory Auxiliary Input: The original auxiliary input, if present, will be retained and accessible through your new head unit.

Manutenzione

The AX-GMCL2-SWC is designed for long-term reliability and typically requires minimal maintenance. Consider the following:

Connessioni sicure: Controllare periodicamente che tutti i collegamenti elettrici siano saldi e privi di corrosione.
Aggiornamenti del firmware: The module is Micro B USB updatable. Check the Axxess website for any available firmware updates that may improve performance or address compatibility issues. Use the official PC software for updates.
Fattori ambientali: Ensure the module is installed in a dry, stable environment within the vehicle's dashboard, away from excessive heat or moisture.

Risoluzione dei problemi

If you encounter issues with your AX-GMCL2-SWC, review i seguenti passaggi comuni per la risoluzione dei problemi:

Nessuna alimentazione alla radio:
- Verificare che tutti i collegamenti di alimentazione e di messa a terra siano saldi.
- Check vehicle fuses.
- Ensure the interface module is properly connected to the vehicle's data bus.
Comandi al volante non funzionanti:
- Confirm the SWC wire from the interface is correctly connected to the aftermarket radio's SWC input (e.g., 3.5mm jack or specific wire).
- Ensure the interface is programmed for your specific radio brand/model. If auto-detection fails, use the PC software for manual configuration.
- Some steering wheel buttons (e.g., "Source Down" or "OnStar" on older GM models) may not be remappable or supported by all aftermarket radios.
No Chimes or Incorrect Chime Volume:
- Verify the chime module connections.
- Adjust the potentiometer on the AX-GMCL2-SWC module to set the desired chime volume.
Dimmer Control Issues:
- Check the dimmer wire connection between the interface and the aftermarket radio.
- Ensure the aftermarket radio's dimmer settings are correctly configured.
Vehicle System Malfunctions (e.g., Speedometer erratic, vehicle not starting):
- Immediately disconnect the interface and revert to factory wiring if possible.
- These symptoms indicate a serious wiring error or module malfunction. Seek professional assistance.
Problemi di aggiornamento del firmware:
- Ensure you are using the correct and latest PC software from Axxess.
- Use a reliable USB cable and ensure stable power to the module during updates.

If problems persist after following these steps, contact Axxess technical support for further assistance.

Specifiche

Dimensioni del prodotto	9.3 x 4.2 x 2.4 pollici
Peso dell'articolo	12 once
Numero di modello	AX-GMCL2-SWC
ASIN	B01MG2F61T
Produttore	Industrie Petra
Prima data disponibile	21 ottobre 2016

Garanzia e supporto

Informazioni sulla garanzia

For detailed warranty information regarding the Axxess AX-GMCL2-SWC Data Interface, please refer to the documentation included with your purchase or visit the official Axxess websito. I termini e le condizioni di garanzia sono soggetti a modifiche da parte del produttore.

Supporto tecnico

If you require technical assistance or have questions not covered in this manual, please contact Axxess technical support directly. Contact information can typically be found on the manufacturer's official websito o nella confezione del prodotto.

	Interfaccia dati Chrysler Axxess AX-CH013-SWC con guida all'installazione e alla configurazione SWC Comprehensive installation and configuration guide for the Axxess AX-CH013-SWC Chrysler Data Interface with SWC, covering wiring, initialization, steering wheel control setup, and troubleshooting for 2004-up Chrysler, Dodge, Jeep, Mitsubishi, Ram, and Volkswagen vehicles.
	Axxess AXDIS-CL2: GM Data Interface with SWC Installation Guide (2000-2013 Vehicles) Installation guide for the Axxess AXDIS-CL2 GM Data Interface, enabling aftermarket stereo integration while retaining factory features like steering wheel controls, accessory power, and chimes in GM vehicles (2000-2013).
	Istruzioni per l'installazione del veicolo GM AXXESS AX-GMLAN29-SWC Install the AXXESS AX-GMLAN29-SWC interface in your 2006+ GM vehicle to retain steering wheel controls, factory audio features, backup camera, and more. This guide covers connections, programming, and adjustments for various amptipi di lifier.
	Istruzioni per l'installazione dell'interfaccia dati GM AXXESS AX-GMLAN29-SWC per veicoli dal 2006 in poi Comprehensive installation guide for the AXXESS AX-GMLAN29-SWC GM Data Interface. This manual provides detailed instructions for connecting the interface to retain factory features like steering wheel controls, backup cameras, RSE, and audio settings in 2006-up GM vehicles with non-amplified, analog, or digital ampsistemi lificati.
	Istruzioni per l'installazione del cablaggio di controllo del volante Axxess AXSWCH-FD1 Istruzioni di installazione per il cablaggio per i comandi al volante Axxess AXSWCH-FD1, progettato per modelli Ford selezionati dal 2013 al 2019. Questa guida descrive in dettaglio i collegamenti e le caratteristiche per il mantenimento dei comandi audio al volante e delle telecamere di retromarcia di fabbrica.
	Axxess AXTO-M12 AmpIstruzioni per l'installazione dell'interfaccia lifier per Mitsubishi 2007-2013 Guida all'installazione passo passo per Axxess AXTO-M12 ampInterfaccia lifier, progettata per modelli selezionati di Mitsubishi Lancer, Outlander Sport e Outlander dal 2007 al 2013. Include schemi elettrici, procedure di regolazione e informazioni di supporto tecnico.

Axxess AX-GMCL2-SWC