1. Prodotto finitoview
The Uniwatt by Stelpro UHC2002W is a modern, surface-mounted convector heater designed to provide consistent and quiet warmth. This 2000W, 240V unit features a built-in electronic thermostat for precise temperature control and energy efficiency. Its sleek design and durable finish make it suitable for various indoor spaces.
Immagine 1.1: anteriore view of the Uniwatt by Stelpro UHC2002W Convector Heater.
Caratteristiche principali:
- Capacità di riscaldamento: 2000 Watts, 240 Volts.
- Termostato: Integrated electronic thermostat for optimal energy usage.
- Progetto: Sleek, modern aesthetic with rounded sides and a 22-gauge steel cabinet.
- Installazione: Designed for surface or wall-mounted installation with a concealed mounting bracket.
- Operazione: Quiet operation suitable for bedrooms, offices, and living areas.
2. Informazioni sulla sicurezza
Leggere attentamente tutte le istruzioni prima di installare o utilizzare questo riscaldatore. Il mancato rispetto di queste istruzioni può causare incendi, scosse elettriche, lesioni gravi o morte.
Linee guida generali sulla sicurezza:
- Protezione circuiti: Protect the unit with appropriate circuit breakers or fuses as per the nameplate specifications.
- Voltage Compatibilità: Garantire la fornitura voltage (volts) matches the rating indicated on the unit's nameplate.
- Messa a terra: Questa unità deve essere adeguatamente messa a terra.
- Cablaggio: Use copper conductors only. Power leads must be suitable for 75°C (167°F).
- Disconnessione dell'alimentazione: Always switch off the power supply to the unit at the circuit breaker/fuse before any installation, repair, or cleaning procedures.
- Uso previsto: Verify that the unit is designed for the intended application. Consult the product catalog or a representative if necessary.
- Heating Capacity Recommendation: Recommended heating capacity is 1.25 W/cubic foot (0.03 m³).
3. Installazione
The UHC2002W convector heater is designed for streamlined surface or wall-mounted installation. Follow these steps for a secure and efficient setup.
Montaggio del riscaldatore:
- Selezione della posizione: Choose a suitable wall location, ensuring a minimum clearance of 4 inches (10 cm) from the floor to the bottom of the heater. Avoid placing it directly under electrical outlets.
- Installazione della staffa: Utilize the concealed mounting bracket provided. Securely attach the bracket to the wall studs or use appropriate wall anchors for stability.
- Posizionamento del riscaldatore: Carefully hang the heater onto the installed mounting bracket. Ensure it is level and securely seated.
Image 3.1: The convector heater installed on a wall, demonstrating its quick and easy installation process.
Electrical Connection (Hardwired 240V):
This heater requires a hardwired 240V connection. All electrical work must be performed by a qualified electrician in accordance with local and national electrical codes.
- Disconnessione dell'alimentazione: Before starting any wiring, ensure the main power supply to the circuit is turned off at the breaker panel.
- Accesso al vano cablaggio: Open the wiring compartment on the back of the heater.
- Collegare i fili: Connect the 240V power supply wires to the heater's terminals using appropriate wire connectors. The back entry plate includes cable clamps for a tidy and secure setup. Ensure all connections are tight and correct (Line 1, Line 2, Ground).
- Chiudi scomparto: Securely close the wiring compartment cover.
- Ripristina alimentazione: Una volta completata e verificata l'installazione, ripristinare l'alimentazione all'interruttore automatico.
Image 3.2: Illustration of a 240V hardwired connection for the heater, showing proper wiring into a junction box.
4. Istruzioni per l'uso
The UHC2002W heater features a built-in electronic thermostat for precise temperature control.
Using the Electronic Thermostat:
- Accensione: Assicurarsi che il riscaldatore sia installato correttamente e collegato all'alimentazione.
- Regolazione della temperatura: Use the up and down buttons on the thermostat display to set your desired room temperature. The current temperature and setpoint will be visible on the digital display.
- Efficienza energetica: The electronic thermostat is designed to optimize energy usage by maintaining the set temperature efficiently.
- Funzionamento silenzioso: The convector design ensures quiet operation, making it suitable for noise-sensitive environments.
Image 4.1: Close-up of the heater's electronic thermostat, displaying the current temperature setting.
5. Manutenzione
Regular maintenance ensures the longevity and efficient operation of your convector heater. Always disconnect power before performing any maintenance.
Pulizia:
- Pulizia esterna: Pulire le superfici esterne con un panno morbido, damp panno. Non utilizzare detergenti abrasivi, solventi o spray direttamente sull'unità.
- Rimozione della polvere: Periodically use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles. This helps maintain optimal airflow and heating efficiency.
Ispezione:
- Cablaggio: Annually inspect the electrical connections for any signs of wear or damage. If any issues are found, contact a qualified electrician.
- Montaggio: Ensure the heater remains securely mounted to the wall.
6. Risoluzione Dei Problemi
If you experience issues with your Uniwatt by Stelpro convector heater, refer to the following common troubleshooting steps.
Problemi comuni e soluzioni:
- Il riscaldatore non si accende:
- Check the circuit breaker: Ensure the breaker for the heater circuit is in the 'ON' position.
- Verify power supply: Confirm that the unit is receiving 240V power.
- Thermostat setting: Make sure the thermostat is set to a temperature higher than the current room temperature.
- Potenza termica insufficiente:
- Clear obstructions: Ensure air intake and exhaust grilles are not blocked by furniture, curtains, or dust.
- Room size: Verify that the heater's wattage is appropriate for the room size. Refer to the heating capacity recommendation (1.25 W/cubic foot).
- Thermostat calibration: If you suspect the thermostat is inaccurate, consult the full product manual or contact support.
- Rumori insoliti:
- Expansion/Contraction: Minor clicking or popping sounds are normal as the metal heats up and cools down.
- Loose mounting: Ensure the heater is securely mounted to the wall.
If the problem persists after attempting these troubleshooting steps, contact Stelpro customer support.
7. Specifiche
| Attributo | Valore |
|---|---|
| Marca | Stelpro (Uniwatt) |
| Numero di modello | UHC2002W |
| Potenza/Watttage | 2000 Watt |
| Voltage | 240 Volt |
| Colore | Bianco |
| Materiale | Acciaio |
| Dimensioni del prodotto | 88.9 x 10 x 44.61 cm (35 x 3.9 x 17.5 pollici) |
| Peso dell'articolo | 6.03 kg (13.3 libbre) |
| Caratteristiche speciali | Termostato elettronico |
| Tipo di montaggio | Montaggio a parete |
| Metodo di riscaldamento | Convezione |
| Uso interno/esterno | Al chiuso |
Image 7.1: Dimensional drawing of the UHC2002W convector heater.
Heating Area Recommendation:
To determine the appropriate heating device for your space, consider the area to be heated. The table below provides a general guideline for required power (wattage) based on area (in square feet).
Image 7.2: Guide for selecting heater wattage in base alla superficie della stanza.
8. Garanzia e supporto
Informazioni sulla garanzia:
The Uniwatt by Stelpro UHC2002W Convector Heater comes with a Garanzia di 2 annoSi prega di conservare la prova d'acquisto per eventuali reclami in garanzia.
Image 8.1: Key features including the 2-year warranty.
Assistenza clienti:
For technical assistance, warranty claims, or further information, please contact Stelpro customer service:
- Produttore: Stelpro
- Telefono: Numero di parte 1-844-783-5776
- E-mail: info@stelpro.com
- Luogo di attività: 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7, Canada
Image 8.2: Proudly made in Canada.
