1. Informazioni importanti sulla sicurezza
Leggere attentamente tutte le istruzioni prima di installare o utilizzare questo riscaldatore. Il mancato rispetto di queste istruzioni può causare incendi, scosse elettriche, lesioni gravi o morte.
- Protezione elettrica: Protect the unit with appropriate circuit breakers or fuses as per the nameplate specifications.
- Voltage Compatibilità: Garantire la fornitura voltage (volts) matches the rating indicated on the heater's nameplate.
- Messa a terra: Questa unità deve essere adeguatamente messa a terra.
- Cablaggio: Use copper conductors only. Power leads must be suitable for 75°C (167°F).
- Disconnessione dell'alimentazione: Always switch off the power supply to the unit at the circuit breaker/fuse before any installation, repair, or cleaning.
- Uso previsto: Verify that the heater is suitable for its intended application. Consult the product catalog or a representative if unsure.
- Capacità di riscaldamento consigliata: For optimal performance, a heating capacity of 1.25 W per cubic foot (0.03 m³) is recommended.
2. Prodotto finitoview
The Uniwatt by Stelpro UHC1002W is a modern, surface-mounted convector heater designed for quiet and efficient heating. It features a durable 22-gauge steel cabinet and an integrated electronic thermostat for precise temperature control.
Davanti view of the Uniwatt by Stelpro UHC1002W Convector Heater.
Lato view illustrating the slim profile del termoconvettore.
Detail of the effective heating elements: two stainless steel tubular sheathed elements isolated with nylon sleeves to reduce expansion and contraction noises.
The heater's design promotes efficient airflow, drawing cool air from below and expelling warm air through the front grille, creating a chimney effect for consistent heat distribution.
3. Istruzioni per l'installazione
This heater is designed for surface or wall-mounted installation. Ensure power is disconnected at the circuit breaker before beginning installation.
3.1 Montaggio
- The heater must be mounted with a minimum clearance of 4 inches (10 cm) from the floor.
- Utilize the concealed mounting bracket for a secure and tidy installation.
Image illustrating the concealed mounting bracket for wall installation.
3.2 Collegamento elettrico
- The heater requires a 240V hardwired connection.
- Use the back entry plate with cable clamps for a secure and organized wiring setup within the junction box.
- Tutti i cablaggi devono essere conformi ai codici e alle normative elettriche locali.
Diagram showing a typical 240V hardwired connection within a junction box.
4. Istruzioni per l'uso
The Uniwatt UHC1002W heater features a built-in electronic thermostat for precise temperature control and energy optimization.
4.1 Impostazione della temperatura
- Use the control buttons adjacent to the digital display to adjust the desired room temperature.
- The electronic thermostat will maintain the set temperature, cycling the heater on and off as needed.
Avvicinamento view of the integrated electronic thermostat display and control buttons.
5. Manutenzione
Una manutenzione regolare garantisce prestazioni ottimali e longevità del riscaldatore. Scollegare sempre l'alimentazione elettrica dall'interruttore automatico prima di eseguire qualsiasi intervento di manutenzione.
5.1 Pulizia
- Pulire l'esterno della stufa con un panno morbido, damp panno. Non usare detergenti abrasivi o solventi.
- Ensure the air intake and exhaust grilles are free from dust and debris to maintain proper airflow.
6. Risoluzione Dei Problemi
If you experience issues with your Uniwatt convector heater, consult the following table for common problems and solutions.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il riscaldatore non si accende | No power supply; Circuit breaker tripped; Thermostat set too low | Check circuit breaker; Ensure power is on; Increase thermostat setting |
| Riscaldamento insufficiente | Thermostat set too low; Obstruction of air grilles; Heater size inadequate for room | Increase thermostat setting; Clear grilles; Refer to heating capacity guidelines |
| Rumori insoliti | Dust or debris inside unit; Loose mounting | Disconnect power and inspect/clean; Ensure heater is securely mounted |
Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti.
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Stelpro (Uniwatt) |
| Numero di modello | UHC1002W |
| Potenza/Watttage | 1000 Watt |
| Voltage | 240 Volt |
| Materiale | 22-gauge Steel |
| Colore | Bianco |
| Dimensioni del prodotto | 58.1 x 10 x 44.61 cm (22 7/8" W x 3 7/32" D x 17 9/16" H) |
| Peso dell'articolo | 6.03 kg |
| Caratteristiche speciali | Built-in Electronic Thermostat |
| Tipo di montaggio | Montaggio a parete (superficie) |
| Uso interno/esterno | Al chiuso |
| Metodo di riscaldamento | Convezione |
Dimensional diagram of the Uniwatt convector heater.
Indication that the product is proudly made in Canada.
8. Garanzia e supporto
8.1 Garanzia
This Uniwatt by Stelpro convector heater comes with a Garanzia di 2 anno from the date of purchase, covering defects in material and workmanship under normal use.
8.2 Assistenza clienti
For technical assistance, warranty claims, or any questions regarding your heater, please contact Stelpro customer service:
- Telefono: Numero di parte 1-844-783-5776
- E-mail: info@stelpro.com
- Indirizzo: 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7
