1. Introduzione
The DigiTech Bass Whammy is an advanced pitch shifting effect pedal designed specifically for bass guitar. It utilizes sophisticated pitch detection and polyphonic note tracking technology to deliver a wide range of expressive effects. This manual provides essential information for setting up, operating, and maintaining your Bass Whammy pedal.
2. Cosa c'è nella scatola
- 1 x DigiTech Bass Whammy Effect Pedal
- 1 alimentatore (9 V CC)
- 2 x Strukture Right-Angle Guitar Patch Cable (6 in.)
- 2 x Strukture Rubber Instrument Cable
3. Impostazione
Figura 1: in alto view of the DigiTech Bass Whammy Effect Pedal.
3.1 Collegamento di alimentazione
Connect the included 9V DC power supply to the pedal's power input jack. Ensure the power supply is compatible with the pedal's voltage requisiti per prevenire danni.
3.2 Collegamenti audio
- Collega il tuo basso al INGRESSO jack on the pedal using one of the provided instrument cables.
- Collegare il PRODUZIONE jack del pedale al tuo amplifier or next effect pedal in the signal chain using another instrument cable.
- The pedal features true bypass, ensuring your signal remains unaffected when the pedal is disengaged.
3.3 MIDI Control
The Bass Whammy is MIDI controllable, allowing for external control over its functions. Connect a MIDI cable from your MIDI controller to the pedal's MIDI input for advanced integration into your setup.
4. Modalità operative e controlli
The Bass Whammy offers various pitch shifting modes and controls for creative sound manipulation.
4.1 Selezione della modalità
Utilizzare il HARMONY/WHAMMY selector switch to choose between two main categories of effects:
- HARMONY: Adds a harmonized note to your original signal.
- WHAMMY: Shifts your original note up or down by a selected interval.
4.2 Interval Selection
Once a mode is selected, use the rotary knob to choose the specific pitch interval for the effect. Available intervals include various octaves, 4ths, 5ths, and more. The LEDs next to the intervals indicate the currently selected setting.
4.3 Detune
IL SHALLOW DETUNE / DEEP DETUNE switch allows you to apply a subtle or more pronounced detuning effect to your signal, adding chorus-like textures.
4.4 Dive Bomb
IL BOMBA IN SUBACQUEA setting, typically found within the WHAMMY mode, allows for extreme downward pitch shifts, mimicking the sound of a guitar tremolo bar dive.
4.5 Pedale di Espressione
The integrated expression pedal controls the pitch shift amount. Moving the pedal from heel to toe smoothly transitions the pitch through the selected interval.
4.6 Bypass Footswitch
Press the bypass footswitch to engage or disengage the effect. An indicator LED will illuminate when the effect is active.
5. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Peso dell'articolo | 2 libbre |
| Dimensioni del prodotto | 7.75 x 6.5 x 2.5 pollici |
| Fonte di alimentazione | Elettrico con cavo (9 V CC) |
| Voltage | 9 Volt |
| Tipo di connettore | 1/4 inch (6.35mm) mono audio jack |
| Formato del segnale | Analogico |
| Controllo MIDI | SÌ |
| Tipo di bypass | Vero bypass |
6. Manutenzione
To ensure the longevity and optimal performance of your Bass Whammy pedal, follow these maintenance guidelines:
- Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno del pedale. Evitare detergenti abrasivi o solventi.
- Magazzinaggio: Conservare il pedale in un ambiente asciutto, lontano da temperature estreme e dalla luce solare diretta.
- Energia: Always use the specified 9V DC power supply. Disconnect power when the pedal is not in use for extended periods.
7. Risoluzione Dei Problemi
If you encounter issues with your Bass Whammy, try the following steps:
- Nessun suono: Check all cable connections (input, output, power). Ensure the power supply is working and correctly connected. Verify your instrument and amplifier are functioning.
- Poor Pitch Tracking: Ensure your instrument's intonation is correct. Try adjusting your playing dynamics.
- Rumore indesiderato: Check for faulty cables. Ensure the power supply is stable and free from interference. If using other pedals, isolate the Bass Whammy to determine if it's the source of the noise.
- Il pedale non risponde: Disconnect and reconnect the power supply. Check MIDI connections if external control is being used.
If problems persist, consult the DigiTech support websito o contattare il servizio clienti.
8. Garanzia e supporto
The DigiTech Bass Whammy Effect Pedal comes with a limited manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, product registration, or further assistance, visit the official DigiTech websito o contattare il loro servizio clienti.
