Manuale utente dell'attuatore elettrotermico Danfoss 088H3112

1. Prodotto finitoview

The Danfoss 088H3112 is an electrothermal actuator designed for precise control in heating systems. This compact unit is specifically engineered for use with on/off electrical controls to operate various types of valves and manifolds, particularly in underfloor heating applications.

Le caratteristiche principali includono:

• Compatibilità: Designed for seamless integration with Danfoss RA 2000 valve bodies.
• Operazione: Functions as a normally closed (NC) device, meaning the valve is closed when power is off.
• Indicatore visivo: Equipped with a position indicator for easy visual confirmation of the actuator's status.
• Fornitura elettrica: Operates on a 230-volt power supply.
• Lunghezza del cavo: Features a 1.2-meter electrical cable for flexible installation.

Immagine 1.1: The Danfoss 088H3112 electrothermal actuator. It is a white cylindrical unit with a black connector, attached to a coiled white electrical cable. The cable has two exposed wire ends, one blue and one brown, for electrical connection. The actuator features a red indicator on its side.

2. Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di installare o utilizzare questo prodotto. Il mancato rispetto di queste istruzioni può causare danni materiali, lesioni personali o morte.

• Sicurezza elettrica: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting. Electrical work should only be performed by qualified and licensed personnel.
• Installazione: Ensure the actuator is installed according to local electrical and plumbing codes. Do not modify the product in any way.
• Esposizione all'acqua: Avoid exposing the actuator to direct water spray or submersion. While rated IP41, it is not waterproof.
• Volume di eserciziotage: Confermare che la fornitura voltage matches the actuator's specified 230V.

3. Contenuto della confezione

Dopo aver aperto la confezione, verificare che tutti i componenti siano presenti e integri:

• One (1) Danfoss 088H3112 Electrothermal Actuator with integrated 1.2m cable.

4. Configurazione e installazione

This section outlines the general steps for installing the Danfoss 088H3112 actuator. For detailed instructions specific to your heating system, consult your system's documentation or a qualified professional.

1. Prepare the Valve Body: Ensure the valve body (e.g., Danfoss RA 2000) is clean and free of debris.
2. Montare l'attuatore: Carefully place the actuator onto the designated connection point of the valve body. Twist or secure it according to the valve body's mechanism until it is firmly attached. Do not overtighten.
3. Collegamento elettrico: Connect the actuator's electrical cable to the 230V power supply. Ensure correct polarity and secure all connections within an appropriate junction box or terminal block. Refer to local electrical codes for proper wiring practices.
4. Verifica installazione: After installation, visually inspect all connections to ensure they are secure.

5. Istruzioni per l'uso

The Danfoss 088H3112 electrothermal actuator operates automatically based on the electrical signal it receives from your heating control system (e.g., thermostat, timer).

• Normalmente chiuso (NC): When there is no electrical power supplied to the actuator, it will remain in its closed position, preventing flow through the valve.
• Apertura della valvola: When the control system sends a 230V electrical signal to the actuator, it will begin to open the valve. This process typically takes a few minutes as the internal heating element warms up.
• Chiusura della valvola: When the electrical signal is removed, the actuator will cool down and gradually return to its normally closed position, shutting off flow.
• Indicatore di posizione: The red indicator on the side of the actuator provides a visual cue of its operational status. When the valve is open, the indicator will typically be extended or in a different visible position compared to when it is closed.

6. Manutenzione

The Danfoss 088H3112 electrothermal actuator is designed for long-term, maintenance-free operation. There are no user-serviceable parts inside the unit.

• Pulizia: Periodically wipe the exterior of the actuator with a dry, soft cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
• Ispezione: Occasionally check the electrical connections for any signs of wear or loosening. Ensure the actuator remains securely mounted to the valve body.
• Evitare lo smontaggio: Do not attempt to disassemble the actuator, as this will void the warranty and may cause damage or electrical hazard.

7. Risoluzione Dei Problemi

If you experience issues with your Danfoss 088H3112 actuator, consider the following common troubleshooting steps:

• Actuator Not Moving/Valve Not Opening:
  • Check if the 230V power supply is active and reaching the actuator.
  • Verify that the control system (thermostat, timer) is calling for heat/flow.
  • Inspect electrical wiring for loose connections or damage.
  • Ensure the actuator is correctly mounted on the valve body.
• Valve Not Closing/Constant Heat:
  • Confirm that the control system is no longer calling for heat/flow and has removed the 230V signal.
  • Allow sufficient time for the actuator to cool down and return to its normally closed position.
  • Check for any physical obstructions preventing the valve from closing.

If these steps do not resolve the issue, contact a qualified HVAC technician or Danfoss customer support.

8. Specifiche

9. Garanzia e supporto

This Danfoss product is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Danfoss websito.

For technical support, spare parts, or further assistance, please contact Danfoss customer service or your local authorized dealer. Contact information can typically be found on the Danfoss websito: www.danfoss.com