Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Orbit B-hyve Indoor/Outdoor 12 Station WiFi Sprinkler System, model 57950, and the accompanying 12 Rain Catch Cups. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.
Image: The Orbit B-hyve Indoor/Outdoor 12 Station WiFi Sprinkler System (left) with its control panel and display, alongside a white Orbit Rain Catch Cup with a green stake (right).
Informazioni importanti sulla sicurezza
Per ridurre il rischio di lesioni o danni, osservare sempre le seguenti precauzioni di sicurezza:
- Leggere attentamente tutte le istruzioni prima dell'installazione e del funzionamento.
- Scollegare l'alimentazione prima di effettuare qualsiasi operazione di manutenzione o cablaggio.
- Ensure the product is installed in a location protected from direct water spray, unless specifically designed for outdoor exposure.
- Utilizzare solo cavi e connettori approvati.
- Keep children away from the sprinkler system during operation.
Configurazione e installazione
Contenuto della confezione:
- Orbit B-hyve 12-Station WiFi Sprinkler Timer
- Adattatore di alimentazione
- Hardware di montaggio (viti, tasselli)
- 12 Rain Catch Cups
- Guida rapida
Montaggio del timer:
- Choose a suitable indoor or outdoor location near a power outlet and away from direct sunlight or extreme weather.
- Mark the desired mounting points using the timer as a template.
- Praticare dei fori pilota e, se necessario, inserire i tasselli a muro.
- Secure the timer to the wall using the provided screws.
Wiring the Sprinkler Valves:
Connect your sprinkler valve wires to the corresponding terminals on the B-hyve timer. Each station (1-12) corresponds to a specific zone. Ensure the common wire from your valves is connected to the "COMMON" terminal.
- Filo comune: Connect to the terminal labeled "COMMON".
- Cavi di zona: Connect each zone wire to its respective numbered terminal (1-12).
- Master Valve/Pump Start (if applicable): Connect to the terminal labeled "MV" or "PUMP".
Collegamento elettrico:
Plug the power adapter into the timer's power input port, then plug the adapter into a standard electrical outlet. The timer display should illuminate.
Rain Catch Cup Installation:
The included rain catch cups are used to measure precipitation and help calibrate your sprinkler system for optimal water efficiency. Distribute the 12 cups evenly across your lawn or garden areas, ensuring they are placed in open spaces away from obstructions like trees or buildings that might block rain or sprinkler spray.
- Insert the green stake into the ground until the cup is stable and upright.
- Ensure the top of the cup is level with the ground for accurate measurement.
Istruzioni per l'uso
Initial Setup and WiFi Connection:
- Download the "B-hyve" app from the Apple App Store or Google Play Store.
- Create an account and follow the in-app instructions to add your new B-hyve timer.
- The app will guide you through connecting the timer to your home WiFi network.
Programmazione:
The B-hyve system offers flexible programming options via the app or directly on the timer.
- Irrigazione intelligente: Utilize the app's smart watering feature, which uses local weather data to automatically adjust watering schedules.
- Programmi manuali: Create custom watering schedules with specific start times, run times, and days of the week for each zone.
- Ritardo pioggia: Use the "RAIN DELAY" button on the timer or the app to pause watering for a set period (24, 48, or 72 hours) in anticipation of rain.
Funzionamento manuale:
You can manually run a single zone or all zones directly from the timer or the app.
- Temporizzatore: Navigate to "MANUAL" using the dial, select the zone(s) and desired run time, then press "START".
- Tramite App: Select the desired zone(s) and initiate a manual run from the app interface.
Manutenzione
- Pulizia: Periodically wipe the timer's exterior with a damp panno. Non utilizzare detergenti abrasivi né immergere l'unità in acqua.
- winterization: In freezing climates, disconnect the timer from power and drain all water from the system to prevent freeze damage to pipes and valves. Store the timer indoors during winter months.
- Rain Catch Cups: Regularly empty and clean the rain catch cups to ensure accurate readings. Remove any debris that may accumulate inside.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il display del timer è vuoto. | Nessun problema di alimentazione o adattatore di corrente. | Check power outlet, ensure adapter is securely connected. |
| Zone not watering. | Wiring issue, faulty valve, or low water pressure. | Verify wiring connections, check valve operation, ensure main water supply is on. |
| Impossibile connettersi al Wi-Fi. | Incorrect WiFi password, weak signal, or router issue. | Double-check password, move timer closer to router, restart router. |
| Rain delay not working. | Incorrect setting or system override. | Ensure rain delay is active and not overridden by a manual run. |
Specifiche
- Modello: 57950
- Marca: Orbita
- Numero di stazioni: 12
- Connettività: Wi-Fi (2.4GHz)
- Materiale: Plastica
- Colore: Bianco
- Indoor/Outdoor Rating: SÌ
- Codice UPC: 816602020007
- ASIN: B06XT21KD7
Informazioni sulla garanzia
Orbit products are manufactured to high quality standards. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official Orbit websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.
Assistenza clienti
For technical assistance, troubleshooting, or general inquiries, please contact Orbit customer support:
- Websito: www.orbitanline.com
- Telefono: Fare riferimento alla confezione del prodotto o websito per i numeri di telefono più aggiornati.
- Supporto per l'app: Many common issues can be resolved through the B-hyve app's help section.
