Manuale utente del sistema microfonico SE ELECTRONICS X1 S

Introduzione

This manual provides comprehensive instructions for the setup, operation, and maintenance of your SE ELECTRONICS X1 S Microphone System. The X1 S Vocal Pack includes the X1-S microphone, sE ISOLATION-PACK (with pop shield), and a 3-meter microphone cable, offering essential components for high-quality audio recording.

The X1 S features a custom-designed, hand-crafted true condenser capsule, capable of handling high Sound Pressure Levels (SPL) up to 160dB, making it suitable for a wide range of audio sources. The included ISO PACK provides a quick-lock shockmount and a metal pop filter, designed to absorb low-end rumble, footfall noise, and offer superb plosive protection.

Contenuto della confezione

sE X1 S Condenser Microphone
sE ISOLATION-PACK (Shockmount and Metal Pop Filter)
3-meter XLR Microphone Cable

Guida all'installazione

Follow these steps to set up your X1 S Microphone System:

Fissare il supporto antiurto: Carefully screw the sE ISOLATION-PACK shockmount onto a standard microphone stand. Ensure it is securely fastened.
Image: The SE ELECTRONICS X1 S microphone securely mounted within its shockmount, with the pop filter positioned in front.
Inserire il microfono: Gently slide the X1 S microphone into the shockmount's cradle. The quick-lock mechanism will secure the microphone in place, isolating it from vibrations and handling noise.
Posizionare il filtro anti-pop: Attach the metal pop filter to the shockmount. Position it approximately 2-3 inches (5-7.5 cm) in front of the microphone capsule. This helps to reduce plosive sounds (e.g., 'p' and 'b' sounds) and protect the microphone from moisture.
Immagine: un primo piano view of the SE ELECTRONICS X1 S microphone, showing the integrated shockmount and the metal mesh pop filter.
Collegare il cavo: Connect one end of the supplied 3-meter XLR microphone cable to the XLR output on the bottom of the X1 S microphone. Connect the other end to an XLR input on your audio interface, mixer, or preamppiù vivace.
Applica l'alimentazione fantasma: The X1 S is a condenser microphone and requires +48V phantom power to operate. Activate phantom power on your audio interface or mixer. Refer to your audio device's manual for instructions on enabling phantom power.

Istruzioni per l'uso

The X1 S is designed for versatile recording applications. Here are key operational considerations:

Diagramma polare: The X1 S features a fixed cardioid (unidirectional) polar pattern. This means it is most sensitive to sounds coming from the front and rejects sounds from the sides and rear, making it ideal for isolating a sound source.
Interruttori del pad: The microphone includes two switchable attenuation pads:
- Attenuazione da -10 dB: Use this setting when recording louder sources to prevent input clipping on your audio interface.
- Attenuazione da -20 dB: Engage this for extremely loud sources, such as close-miked drums or guitar amplifiers, to further reduce the signal level.
Filtro low-cut: The X1 S also features two switchable low-cut (high-pass) filters:
- 80Hz Low-Cut: Activates a filter at 80 Hz to reduce unwanted low-frequency rumble, such as HVAC noise or footfall vibrations.
- 160Hz Low-Cut: Provides a steeper cut at 160 Hz, useful for reducing proximity effect (excessive bass boost when close to the microphone) or further cleaning up low-end frequencies.
Utilizzi consigliati: The X1 S is highly versatile and recommended for:
- Vocals and Speech
- Broadcasting and Podcasting
- Chitarra elettrica Amplificatori
- Drums (overhead or close-miking)
- Video Recording and Streaming

Manutenzione

Una corretta manutenzione garantisce la longevità e le prestazioni ottimali del microfono:

Pulizia: Use a soft, dry cloth to wipe the microphone body. Do not use liquid cleaners or solvents, as they can damage the finish or internal components. For the pop filter, a soft brush can be used to remove dust.
Magazzinaggio: When not in use, store the microphone in its original packaging or a protective case to shield it from dust, moisture, and physical damage. Avoid storing in environments with extreme temperatures or high humidity.
Gestione: Always handle the microphone with care. Avoid dropping it or subjecting it to strong impacts, as this can damage the sensitive condenser capsule.
Cura del cavo: Coil the XLR cable loosely when storing to prevent kinks and damage to the internal wiring. Avoid placing heavy objects on the cable.

Risoluzione dei problemi

If you encounter issues with your X1 S Microphone System, refer to the following common problems and solutions:

Problema	Possibile causa	Soluzione
Nessuna uscita audio	Alimentazione phantom non abilitata. Cavo XLR difettoso. Incorrect input selection on audio interface/mixer. Microfono non completamente collegato.	Ensure +48V phantom power is active on your audio device. Provare con un cavo XLR diverso. Verify the correct input channel is selected and monitored. Controllare che tutti i collegamenti dei cavi siano saldi.
Suono distorto / clipping	Guadagno di ingresso troppo alto. Microphone too close to loud source. Pad switch not engaged for loud sources.	Ridurre il guadagno in ingresso sull'interfaccia audio/mixer. Aumentare la distanza dalla sorgente sonora. Engage the -10dB or -20dB pad switch on the microphone.
Excessive Bass / Muddy Sound	Proximity effect (microphone too close). Low-frequency rumble.	Aumentare la distanza dalla sorgente sonora. Engage the 80Hz or 160Hz low-cut filter on the microphone.
Background Noise / Hum	Problema di ground loop. Interferenza da altri dispositivi elettronici. Faulty cable shielding.	Assicurarsi che tutte le apparecchiature siano collegate allo stesso circuito di alimentazione oppure utilizzare un condizionatore di potenza. Move microphone and cables away from power supplies, monitors, or other electronic devices. Test with a different, high-quality XLR cable.

Specifiche

Nome del modello	X1 S VOCAL PACK
Tipo di microfono	Condensatore
Modello polare	Unidirezionale (cardioide)
Gamma di frequenza	20 Hz - 20 kHz
Sensibilità Audio	160 dB (SPL massimo)
Impedenza	1000 Ohm
Signal-to-Noise Ratio	87 dB
Livello di rumore	16 dB
Pad Switches	-10 dB, -20 dB
Low-Cut Filters	80Hz, 160Hz
Fonte di alimentazione	+48V Phantom Power (XLR)
Tecnologia di connettività	XLR
Materiale	Metallo
Dimensioni del prodotto (L x P x A)	15.55 x 7.87 x 4.92 pollici
Peso dell'articolo	15.7 once (445 grammi)
Produttore	SE Electronics
Codice UPC	819032011201

Informazioni sulla garanzia

SE ELECTRONICS products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official SE ELECTRONICS websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Nota: i termini della garanzia possono variare in base alla regione.

Supporto

For technical support, service, or further inquiries regarding your SE ELECTRONICS X1 S Microphone System, please contact SE ELECTRONICS customer support through their official websito o le informazioni di contatto fornite nella documentazione del prodotto.

Risorse online: www.seelectronics.com/support

	Manuale utente del microfono USB NEOM di sE Electronics Manuale utente completo per il microfono a condensatore USB NEOM di sE Electronics, che illustra caratteristiche, configurazione, best practice, specifiche tecniche e supporto.
	sE Electronics V7 & V3 Dynamic Microphones User Manual Comprehensive user manual for the sE Electronics V7 and V3 dynamic handheld microphones, detailing features, specifications, practical usage tips, safety guidelines, and support contact information.
	Manuale del microfono sE Electronics: guida ai modelli di ripresa e al funzionamento Una guida completa ai microfoni sE Electronics, che comprende informazioni essenziali sui pattern di ripresa come cardioide, omnidirezionale e a otto, insieme a istruzioni dettagliate sull'uso, la cura, la manutenzione e gli accessori disponibili.
	Manuale utente e specifiche tecniche del microfono a nastro VR1 e VR2 di sE Electronics Manuale utente completo per i microfoni a nastro sE Electronics VR1 e VR2, che illustra caratteristiche, specifiche, configurazione, sicurezza e supporto.
	Manuale utente del microfono sE Electronics sE8 \| Configurazione, controlli e specifiche Manuale utente completo per il microfono a condensatore a diaframma piccolo sE Electronics sE8. Scopri di più su configurazione, controlli, specifiche tecniche e supporto.
	sE Rupert Neve Signature Series User Manual Comprehensive user manual for the sE Rupert Neve Signature Series microphones, including the RNR1 ribbon, RN17 pencil condenser, and RNT large-diaphragm condenser. Details setup, operation, technical specifications, and support for these professional audio recording tools.

SE ELECTRONICS X1 S VOCAL PACK