1. Introduzione
Welcome to the KEF Q750 Floorstanding Speaker instruction manual. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your new speaker. The KEF Q750 is engineered to deliver clear, powerful, and accurate sound, enhancing your home audio experience.
2. Prodotto finitoview
The KEF Q750 Floorstanding Speaker features an enhanced Uni-Q driver Array, designed to smooth out treble frequencies and provide cleaner, more accurate bass. It incorporates new internal upgrades for its low-frequency drivers, including New Surrounds and rear suspension, ensuring immaculate bass performance at any volume. The speaker includes a 6.5” Uni-Q driver Array, one 6.5” bass driver, and two 6.5” auxiliary bass radiators. It is available in sleek matte Black and white vinyl finishes.

Figure 1: KEF Q750 Floorstanding Speaker in Black finish.

Figura 2: Interno view of the KEF Q750 speaker cabinet, showcasing the driver arrangement.

Figura 3: Esploso view che illustra i componenti dell'array di driver KEF Uni-Q.

Figure 4: Close-up of the KEF Uni-Q driver, showing its intricate design.

Figure 5: Diagram illustrating KEF's Metamaterial Absorption Technology (MAT).

Figure 6: Diagram illustrating KEF's Music Integrity Engine (MIE) technology.

Figure 7: Diagram illustrating KEF's Uni-Core technology.

Figure 8: Diagram illustrating KEF's Single Apparent Source Technology.
3. Impostazione
Proper setup is crucial for optimal sound performance. Follow these steps to set up your KEF Q750 Floorstanding Speaker:
- Disimballaggio: Estrarre con cautela l'altoparlante dalla confezione. Conservare tutto il materiale di imballaggio per un eventuale trasporto o stoccaggio futuro.
- Posizionamento: Position the speaker on a sturdy, level surface. Floorstanding speakers generally perform best when placed a few feet away from walls to allow for proper bass dispersion. Experiment with placement to find the best soundstage nella tua stanza.
- Punte/Piedini: Attach the included spikes or feet to the base of the speaker. Spikes can help decouple the speaker from the floor, reducing unwanted vibrations, especially on carpeted surfaces.
- Connessioni: Collega l'altoparlante al tuo amplifier or receiver using high-quality speaker cables. Ensure correct polarity (positive to positive, negative to negative) for each speaker. The Q750 supports bi-wiring/bi-amping if your amplifier allows.

Figura 9: Esample placement of KEF Q750 speakers in a room for optimal listening.
4. Istruzioni per l'uso
Once your KEF Q750 speaker is properly set up and connected, operating it is straightforward:
- Accensione: Accendi il tuo amplificatore o ricevitore.
- Selezione della fonte: Seleziona la sorgente audio desiderata sul tuo amplificatore (ad esempio, lettore CD, dispositivo di streaming, giradischi).
- Regolazione del volume: Aumenta gradualmente il volume del tuo amplifier to a comfortable listening level. Avoid excessively high volumes that may cause distortion or damage to the speakers.
- Periodo di rodaggio: Like many high-fidelity speakers, the KEF Q750 may benefit from a break-in period. Allow several hours of playback at moderate volumes for the drivers to fully settle and achieve their optimal performance.
5. Manutenzione
To ensure the longevity and continued performance of your KEF Q750 speakers, follow these maintenance guidelines:
- Pulizia: Use a soft, dry, lint-free cloth to gently wipe the cabinet surfaces. Avoid abrasive cleaners, solvents, or polishes, as these can damage the finish.
- Assistenza al conducente: Do not touch the speaker drivers (cones or tweeters) as this can cause damage.
- griglie: If using optional magnetic grilles (sold separately), handle them carefully when attaching or removing.
- Ambiente: Tenere gli altoparlanti lontano dalla luce solare diretta, da fonti di calore e da umidità eccessiva. Garantire un'adeguata ventilazione attorno agli altoparlanti.
6. Risoluzione Dei Problemi
If you encounter any issues with your KEF Q750 speakers, refer to the following common troubleshooting tips:
- Nessun suono:
- Check all cable connections between the speaker and amplificatore. Assicurarsi che siano ben saldi e correttamente collegati (positivo con positivo, negativo con negativo).
- Verificare che il amplifier è acceso e la sorgente di ingresso corretta è selezionata.
- Conferma che il volume sul tuo amplifier non è impostato al minimo o disattivato.
- Suono distorto:
- Ridurre il livello del volume sul tuo amppiù vivace.
- Controllare i collegamenti dei cavi degli altoparlanti per verificare che non vi siano fili allentati o cortocircuiti.
- Assicurati che amplifier non è sovraccarico o in clipping.
- Uneven Sound/Poor Imaging:
- Check speaker placement. Ensure both speakers are equidistant from the primary listening position and are not too close to walls or corners.
- Verify that the left and right speaker connections are not swapped.
If the issue persists after trying these steps, please contact KEF customer support or your authorized dealer.
7. Specifiche
Detailed technical specifications for the KEF Q750 Floorstanding Speaker:

Figure 10: KEF Q750 Floorstanding Speaker with key dimensions.
| Caratteristica | Dettaglio |
|---|---|
| Tipo di montaggio | Da terra |
| Materiale | Alluminio |
| Tipo di altoparlante | Da terra |
| Caratteristica speciale | Aumento dei bassi |
| Usi consigliati | For Computers, For DVD Players, For Music Players, For Surround Sound Systems, For Televisions, Home Entertainment Systems, Music Listening |
| Dispositivi compatibili | Lettore musicale |
| Diametro subwoofer | 6.5 pollici |
| Conteggio unità | 1.0 Conteggio |
| Configurazione del canale audio surround | 5.1 |
| Colore | Nero |
| Dimensioni del prodotto | 15"P x 17.5"L x 47"A |
| Peso dell'articolo | 36.4 libbre (16500 grammi) |
| Impedenza | 8 Ohm |
| Tipo di garanzia | Limitato |
| Numero di articoli | 1 |
| Metodo di controllo | Remote (Note: Speaker itself is passive, control via amplificatore) |
| Tecnologia di comunicazione wireless | Bluetooth (Note: Speaker itself is passive, connectivity via amplificatore) |
| Dimensioni dell'altoparlante | 6.5 pollici |
| Fonte di alimentazione | Corded Electric (Note: Speaker itself is passive, power via amplificatore) |
| Signal-to-Noise Ratio | 60 dB |
| Diametro del woofer | 6.5 pollici |
| Diametro del tweeter | 1 pollici |
| Livello di resistenza all'acqua | Waterproof (Note: This may refer to specific components, general speaker care should avoid water exposure) |
| Tipo di driver audio | Driver dinamico |
| Dimensioni del driver audio | 6.5 pollici |
| Tecnologia di connettività del subwoofer | Cablato |
| Numero di serie | 750 |
| Codice UPC | 637203215766 |
| Produttore | Il Kef |
| Forma | Colonna |
| Potenza massima in uscita dell'altoparlante | 300 Watt |
| Risposta in frequenza | Frequenza 48 Hz |
| Tecnologia di connettività | Ausiliario |
| Modalità di uscita audio | Circondare |
8. Cosa c'è nella scatola
Upon unpacking your KEF Q750 Floorstanding Speaker, you should find the following items:
- 1 x KEF Q750 Floorstanding Speaker
- Speaker spikes/feet (for stability and decoupling)
- Manuale dell'utente (questo documento)
Note: Speaker grilles are sold separately.
9. Garanzia e supporto
The KEF Q750 Floorstanding Speaker comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or further inquiries, please visit the official KEF website or contact your authorized KEF dealer.
Puoi anche visitare il KEF Store on Amazon per ulteriori informazioni e risorse sul prodotto.





