1. Informazioni sulla sicurezza
Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always read and understand the entire instruction manual before operating the Stihl MS 201 TC-M chainsaw. Failure to follow safety instructions can result in serious injury or death.
Dispositivi di protezione individuale (DPI)
- Protezione della testa: Wear a safety helmet with face and hearing protection.
- Protezione degli occhi: Indossare sempre occhiali o occhiali protettivi.
- Protezione della mano: Use heavy-duty work gloves.
- Protezione delle gambe: Indossare pantaloni o ghette protettive contro la motosega.
- Protezione del piede: Wear safety boots with steel toes and non-slip soles.
Sicurezza nella manipolazione del carburante
- Always mix and handle fuel in a well-ventilated area, away from ignition sources.
- Utilizzare solo contenitori di carburante approvati.
- Non fumare durante il rifornimento.
- Asciugare immediatamente il carburante versato.
2. Prodotto finitoview
The Stihl MS 201 TC-M is a powerful and compact gasoline-powered chainsaw designed for professional tree care and pruning. It features a 35 cm cutting length and is equipped with advanced engine technology for efficient operation.
Figura 2.1: Lato superiore view of the Stihl MS 201 TC-M chainsaw, highlighting the ergonomic handle and engine housing.
Figura 2.2: lato view of the Stihl MS 201 TC-M chainsaw, showing the Stihl branding and engine components.
3. Impostazione
Disimballaggio e montaggio
- Rimuovere con attenzione tutti i componenti dalla confezione.
- Inspect for any shipping damage. If damaged, do not use and contact your dealer.
- Assicurarsi che siano presenti tutti i componenti elencati nella lista di imballaggio.
Bar and Chain Installation
Proper installation of the guide bar and saw chain is crucial for safe and efficient operation.
- Assicurarsi che il freno della catena sia disinserito.
- Remove the chain sprocket cover by loosening the nuts.
- Posizionare la barra di guida sui perni.
- Fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges face forward on the top of the bar.
- Replace the chain sprocket cover and hand-tighten the nuts. Do not fully tighten yet.
- Adjust chain tension (refer to 'Chain Tension Adjustment' in Section 5).
- Fully tighten the chain sprocket cover nuts.
Figura 3.1: primo piano view of the chainsaw's chain and guide bar, illustrating proper assembly.
Fuel and Chain Oil Filling
The MS 201 TC-M operates on a gasoline-oil mixture and requires chain lubricant.
- Carburante: Use a high-quality unleaded gasoline mixed with Stihl 2-stroke engine oil at the recommended ratio (typically 50:1). Refer to the fuel tank cap for specific ratios.
- Olio per catene: Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil.
Ensure both caps are securely tightened after filling.
4. Istruzioni per l'uso
Avvio della motosega
- Posizionare la motosega su una superficie solida e piana.
- Inserire il freno della catena spingendo in avanti la protezione anteriore della mano.
- Set the master control lever to the cold start position (choke).
- Hold the chainsaw firmly with one hand on the front handle and place your foot on the rear handle.
- Pull the starter cord slowly until resistance is felt, then pull briskly until the engine fires briefly.
- Spostare la leva di comando principale in posizione di mezza accelerazione.
- Tirare nuovamente la corda di avviamento finché il motore non si avvia.
- Blip the throttle to disengage the half-throttle and return to idle.
- Disinserire il freno della catena prima di iniziare le operazioni di taglio.
Stopping the Chainsaw
To stop the engine, move the master control lever to the STOP position.
Funzionamento del freno a catena
The chain brake is a critical safety feature. It can be engaged manually by pushing the front hand guard forward or automatically by inertia during kickback. Always ensure the chain brake is functional before each use.
5. Manutenzione
Regular maintenance ensures the longevity and safe operation of your Stihl MS 201 TC-M chainsaw.
Regolazione della tensione della catena
Correct chain tension is vital. A loose chain can derail, and an overly tight chain can cause premature wear to the bar and chain, and reduce engine power.
- Loosen the nuts on the chain sprocket cover.
- Using the tensioning screw, adjust the chain until it fits snugly against the underside of the guide bar, but can still be pulled around by hand.
- Lift the tip of the guide bar slightly while tightening the nuts on the chain sprocket cover.
- Check tension again.
Affilatura catena
A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or have it professionally sharpened.
Pulizia del filtro dell'aria
Clean the air filter regularly to maintain engine performance and prevent damage. Remove the filter cover and clean the filter element with warm soapy water or compressed air. Replace if damaged.
Ispezione della candela
Inspect the spark plug for wear and proper gap. Replace if electrodes are worn or fouled. Refer to the specifications for the correct spark plug type and gap.
Manutenzione della barra di guida
Regularly clean the guide bar groove and oil holes. Flip the guide bar periodically to ensure even wear.
6. Risoluzione Dei Problemi
This section addresses common issues you might encounter with your Stihl MS 201 TC-M chainsaw.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il motore non si avvia | Mancanza di carburante, procedura di avviamento errata, candela sporca, filtro del carburante intasato. | Check fuel level, follow starting instructions, clean/replace spark plug, check fuel filter. |
| Il motore funziona, ma la catena non si muove | Freno catena inserito, problema alla frizione. | Disengage chain brake. If problem persists, contact service. |
| Scarse prestazioni di taglio | Catena usurata, tensione della catena non corretta, barra di guida usurata. | Sharpen chain, adjust chain tension, inspect/replace guide bar. |
| Vibrazione eccessiva | Loose components, damaged chain/bar, engine issue. | Check all fasteners, inspect chain/bar for damage, contact service if engine related. |
7. Specifiche
Key technical specifications for the Stihl MS 201 TC-M chainsaw:
- Numero modello: Modello 201
- Fonte di energia: Benzina
- Lunghezza di taglio: 35 centimetri
- Peso dell'articolo: 3.85 kg (8.49 libbre)
- Dimensioni del prodotto: 37 x 10 x 37 cm (14.57 x 3.94 x 14.57 pollici)
- Materiale: Plastica (alloggiamento)
- Produttore: STIHL
- Codice GTIN (UPC): 00795711953546
8. Garanzia e supporto
For warranty information, please refer to the warranty card included with your product or contact your authorized Stihl dealer. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or service, please contact your local authorized Stihl service center. Only use genuine Stihl replacement parts and accessories.
