Introduzione
Welcome to the user manual for your new ThruNite TC12 V2 EDC Flashlight. This powerful and versatile LED flashlight is designed for everyday carry, offering exceptional brightness, reliable performance, and convenient USB-C recharging. Please read this manual carefully to ensure proper use, maintenance, and to maximize the lifespan of your device.
Image: The ThruNite TC12 V2 flashlight shown alongside its rechargeable 18650 battery.
Contenuto della confezione
Upon opening your ThruNite TC12 V2 package, you should find the following items:
- 1 x ThruNite TC12 V2 Cool White Flashlight
- 1 x ThruNite 18650 Rechargeable Battery (3400mAh)
- Cavo di ricarica 1 x USB-C
- 1 x cordino
- 1 x fondina
- 1 x Pocket Clip (pre-installed or separate)
- O-ring di ricambio
- Spare USB Port Cover
Image: All items included in the ThruNite TC12 V2 flashlight package, laid out for inspection.
Impostare
Installazione della batteria
- Svitare il tappo posteriore della torcia ruotandolo in senso antiorario.
- Insert the included ThruNite 18650 battery with the positive (+) end facing towards the head of the flashlight (towards the LED).
- Screw the tail cap back on clockwise until it is securely tightened. Ensure the tail cap is fully tightened for proper electrical contact and water resistance.
Ricarica
The TC12 V2 features a built-in USB-C charging port for convenient recharging of the included 18650 battery.
- Individua la porta di ricarica USB-C sul lato della torcia, solitamente coperta da una linguetta di gomma.
- Gently lift the rubber flap to expose the port.
- Connect the included USB-C cable to the flashlight's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
- La spia luminosa sull'interruttore laterale indicherà lo stato di carica:
- Blu: Charging complete.
- Rosso: Ricarica in corso.
- Once charging is complete, disconnect the USB-C cable and firmly press the rubber flap back into place to ensure water resistance.
Immagine: Primo piano view of the ThruNite TC12 V2 flashlight, highlighting the USB-C charging port located on the side.
Operazione
The TC12 V2 features both a tail switch and a side switch for versatile operation.
Tail Switch Operations
- momentaneo acceso: Lightly press the tail switch for momentary illumination. Release to turn off.
- Accensione/spegnimento costanti: Fully press the tail switch until it clicks to turn the flashlight on or off.
- Turbo istantaneo: From off, fully press and hold the tail switch to activate Turbo mode instantly. Release to turn off.
Image: The tail cap of the ThruNite TC12 V2 flashlight, where the primary power switch is located.
Side Switch Operations (when flashlight is ON via tail switch)
- Cambia modalità: From ON, press and hold the side switch to cycle through Firefly, Low, Medium, and High modes. Release the switch to select the desired mode. The flashlight has mode memory and will turn on in the last used general mode (excluding Turbo and Strobe).
- Turbo istantaneo: Double-click the side switch quickly to activate Turbo mode. Double-click again to return to the previous mode.
- Modalità strobo: Triple-click the side switch quickly to activate Strobe mode. Double-click to return to the previous mode.
- Modalità Lucciola: From OFF, press and hold the side switch for 1 second to activate Firefly mode.
Image: The ThruNite TC12 V2 flashlight, highlighting the side switch with its integrated indicator light.
Manutenzione
- Pulizia: Pulire regolarmente le filettature e gli O-ring con un panno pulito. Applicare periodicamente un sottile strato di grasso al silicone sugli O-ring per mantenerne l'impermeabilità.
- Cura della batteria: Store the battery in a cool, dry place when not in use. If the flashlight will not be used for an extended period, remove the battery to prevent parasitic drain and potential damage.
- Porta USB: Ensure the rubber cover for the USB-C charging port is always securely closed when not charging to prevent dust and water ingress.
- Pulizia delle lenti: Use a soft, lint-free cloth to clean the lens. Avoid abrasive materials that could scratch the surface.
Risoluzione dei problemi
If you encounter issues with your ThruNite TC12 V2, please refer to the table below for common problems and their solutions.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La torcia non si accende. | Battery is dead or improperly installed. Tail cap is loose. | Charge the battery. Ensure battery is inserted with positive (+) end towards the head. Tighten the tail cap fully. |
| La luce è fioca o tremolante. | Low battery. Poor contact between battery and contacts. | Recharge the battery. Clean battery contacts and flashlight contacts. Ensure tail cap is tight. |
| L'indicatore di carica non funziona. | USB cable or power source issue. Charging port cover not fully open. | Try a different USB cable or power source. Ensure the rubber cover is fully open and the cable is inserted correctly. |
| La torcia si surriscalda rapidamente. | Operating in Turbo mode for extended periods. | This is normal for high-output flashlights. Reduce output to a lower mode if it becomes too hot to handle. The flashlight has thermal regulation to prevent overheating. |
Specifiche
Detailed technical specifications for the ThruNite TC12 V2 CW Flashlight:
| Caratteristica | Dettaglio |
|---|---|
| Modello | TC12 V2 CW |
| Marca | Attraverso la notte |
| Tipo di sorgente luminosa | GUIDATO |
| Max Output Brightness | 1100 lumen |
| Distanza massima del raggio | 240 metri |
| Fonte di alimentazione | Battery Powered (1x 18650 rechargeable battery included) |
| Ricarica | USB-C ricaricabile |
| Materiale | Aluminum (Type III hard-anodized finish) |
| Livello di resistenza all'acqua | IPX-8 (2 meters submersible) |
| Resistenza all'impatto | 1 metri |
| Dimensioni del prodotto | 1"P x 1"L x 5.51"A (circa 25.4 mm x 25.4 mm x 140 mm) |
| Colore | Black (TC12 V2 CW) |
Immagine: Un dettaglio view of the LED emitter and reflector assembly within the ThruNite TC12 V2 flashlight head.
Garanzia e supporto
ThruNite products are manufactured to high quality standards. For specific warranty details and support inquiries, please refer to the warranty card included in your product packaging or visit the official ThruNite website. You may also contact ThruNite customer service directly for assistance with product operation, troubleshooting, or warranty claims.
For the most up-to-date information and contact methods, please visit: www.thrunite.com
