1. Prodotto finitoview
The Beam Electronics DGC2020 Car Phone Holder Mount is designed to securely hold your smartphone in your vehicle. It features a quick-release button for easy phone removal and a 360-degree rotating head for optimal viewing angles. This mount is compatible with a wide range of smartphones and electronic devices.
Caratteristiche principali:
- Pulsante di rilascio rapido: Press the button on the back to open the arms and retrieve your mobile phone. Press the arms together to clamp il telefono in modo sicuro.
- Rotazione del grado 360: The fully 360-degree rotation provides the best viewing angle for navigation, calls, or music.
- Ampia compatibilità: Fits most cellphones and electronic devices with a width from 1.9 inches to 3.7 inches.
- Single-handed Operation: Designed for simple installation and removal of smartphones with no tools required.
Image 1.1: The Beam Electronics Car Phone Holder Mount securely installed in a vehicle's air vent, displaying a smartphone.
2. Configurazione e installazione
Follow these steps to properly install your car phone holder mount:
- Identify Compatible Air Vent: The mount is designed for horizontal or vertical air vents. Ensure your vehicle's vent type is compatible.
- Fissare il supporto: Locate the clip mechanism on the back of the phone holder. Push the clip firmly onto one of the air vent blades.
- Fissare la clip: On the back of the clip, there is a lever or knob to tighten the grip. Adjust it to ensure the mount is securely fastened to the vent and does not wobble.
Immagine 2.1: Esploso view highlighting key components: adjustable side-grip arms, 360-degree rotatable pivot, quick-release button, and the cushioned air vent clip.
Image 2.2: Visual guide for compatible and incompatible car air vent designs for secure mounting.
Video 2.1: Demonstrates installation tips for the car phone holder mount in various car models, showing how to attach it to the air vent and adjust for optimal positioning.
3. Istruzioni per l'uso
Inserimento del telefono:
- Gently pull open the adjustable side-grip support arms of the holder.
- Place your smartphone into the holder, ensuring it rests on the bottom support feet.
- Press the adjustable arms inward until they securely grip your phone. The arms will lock into place, holding your device firmly.
Rimozione del telefono:
- Locate the quick-release button on the back of the holder (refer to Image 2.1).
- Press the quick-release button. The side-grip arms will automatically slide open.
- Carefully remove your smartphone from the holder.
Image 3.1: A finger demonstrating the quick-release button on the back of the mount, which expands the arms for phone removal.
Regolazione del Viewangolo di ing:
The phone holder features a 360-degree rotatable pivot. Simply rotate the phone holder to achieve your desired vertical or horizontal viewing angle. Ensure the angle is adjusted before driving to avoid distraction.
Video 3.1: Shows the phone holder's adjustable side grips and 360-degree rotation, demonstrating how it securely holds various phone sizes and allows for flexible viewangoli di inclinazione.
Video 3.2: Illustrates the ease of use for the Beam Electronics car phone holder, including phone insertion, removal, and rotation, highlighting its sturdy grip.
4. Cura e manutenzione
- Pulizia: Pulisci il supporto con un panno morbido eamp panno per rimuovere polvere e detriti. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
- Ispezione: Periodically check the air vent clip and phone gripping arms for any signs of wear or damage. Ensure all moving parts operate smoothly.
- Temperatura: While the product is designed to be heat and cold resistant, extreme temperatures can affect its longevity. Avoid prolonged exposure to direct sunlight or extreme cold when not in use.
5. Risoluzione Dei Problemi
- Mount feels loose on the vent: Ensure the tightening lever/knob on the back of the clip is fully engaged and tightened. Re-adjust if necessary.
- Il telefono non è tenuto saldamente: Make sure the side-grip arms are fully closed around your phone. The holder is compatible with devices between 1.9 and 3.7 inches in width.
- Difficulty with quick-release button: Ensure the button is pressed firmly and completely. If it still sticks, check for any obstructions or debris.
6. Specifiche del prodotto
| Caratteristica | Specificazione |
|---|---|
| Dimensioni del prodotto | 2.72 x 3.39 x 5.51 pollici |
| Peso dell'articolo | 0.071 once |
| Numero modello articolo | DGC2020 |
| Caratteristiche speciali | Adjustable, Cold Resistant, Heat Resistant, Rotatable |
| Colore | Grigio, Nero |
| Dispositivi compatibili | Smartphone |
| Modelli di telefono compatibili | iPhone 12, 11 Pro Max, XS, XR, X, 8+, 7+, SE, 6s, 6+, 5s, 4; Samsung Galaxy S6, HTC, LG, Nexus, Nokia (width 1.9 to 3.7 inches) |
| Tipo di montaggio | Sfogo |
7. Garanzia e supporto
This Beam Electronics Car Phone Holder Mount comes with a Garanzia di 1 anno dalla data di acquisto. La presente garanzia copre i difetti di fabbricazione e assicura il corretto funzionamento del prodotto in condizioni di utilizzo normali.
For warranty claims, technical support, or any inquiries regarding your product, please contact Beam Electronics customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (DGC2020) ready when contacting support.
