Autopilot APC8200 CO2 Monitor & Controller Instruction Manual

1. Introduzione

The Autopilot APC8200 CO2 Monitor & Controller is designed to precisely control, monitor, and record carbon dioxide (CO2) levels. This device allows users to track CO2 levels over various timeframes, from minutes to up to 7 days, providing valuable data for environmental management. It features a customizable CO2 setpoint and deadband, enabling fine-tuning of CO2 levels to optimize specific environments, such as grow rooms. The integrated memory function assists in analyzing CO2 distribution trends for informed adjustments.

2. Caratteristiche del prodotto

• Fully Customizable Settings: Allows for flexible programming of ppm deadband and CO2 setpoint.
• Trend Chart Recording: Records CO2 levels per minute, hour, day, and week for accurate analysis.
• Adjustable Trend Chart Zoom: Enables detailed tracing of ppm levels over time.
• Remote CO2 Sensor Probe: Includes a photocell and 15-foot data cable for optimal placement and readings.
• 2-Channel Low Drift NDIR Sensor: Ensures precise CO2 ppm level readings.
• Green LED Indicators: Provides clear visual status updates of the unit's operation.

3. Prodotto finitoview

Figure 1: The Autopilot APC8200 CO2 Monitor and Controller unit with its remote sensor and connecting cables.

4. Istruzioni per l'installazione

1. Disimballare i componenti: Carefully remove the APC8200 controller unit, remote CO2 sensor probe, and 15-foot data cable from the packaging.
2. Collegare il sensore remoto: Plug the 15-foot data cable into the designated port on the main APC8200 controller unit and the other end into the remote CO2 sensor probe. Ensure connections are secure.
3. Sensore di posizione: Place the remote CO2 sensor probe in the desired location within your environment (e.g., grow room). The 15-foot cable allows for flexible placement to obtain accurate readings. Ensure the photocell on the sensor is exposed to ambient light if day/night detection is required.
4. Collegamento elettrico: Connect the power cord to the APC8200 controller unit and then plug it into a standard electrical outlet. The unit will power on and begin its initialization sequence.
5. Initial Readings: Allow a few minutes for the NDIR sensor to stabilize and display initial CO2, temperature, and humidity readings.

5. Istruzioni per l'uso

5.1 Setting CO2 Setpoint and Deadband

1. Access the settings menu on the controller unit. Refer to the on-screen prompts or the specific button functions for navigation.
2. Locate the CO2 setpoint option. Use the adjustment buttons (usually Up/Down arrows) to set your desired CO2 concentration in parts per million (ppm).
3. Navigate to the deadband setting. The deadband defines the acceptable range above and below your setpoint before the controller activates or deactivates CO2 delivery. Adjust this value to prevent rapid cycling of CO2 equipment.
4. Conferma e salva le tue impostazioni.

5.2 Understanding Trend Charts

The APC8200 features a trend chart display that visualizes CO2 levels over time. This chart can show data for minutes, hours, days, or up to a week, providing a historical overview of CO2 concentrations in your environment.

• Viewing Trends: Use the navigation buttons to cycle through different timeframes (minute, hour, day, week) to view the corresponding CO2 trend data.
• Regolazione dello zoom: The adjustable trend chart zoom levels allow you to focus on specific periods for more detailed analysis of ppm fluctuations.

5.3 Indicatori LED

Green LED identification lights on the unit provide quick visual status updates:

• Refer to the unit's display or specific product documentation for the exact meaning of each LED indicator (e.g., Power On, CO2 Output Active, Alarm).

6. Manutenzione

• Pulizia: Regularly wipe the exterior of the controller unit and sensor probe with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or immerse the unit in water.
• Cura del sensore: Ensure the remote CO2 sensor's intake vents are clear of obstructions to maintain accurate readings.
• Ricalibrazione: While the NDIR sensor is designed for low drift, periodic recalibration may be necessary to ensure long-term accuracy. Refer to the advanced settings menu or contact support for recalibration procedures.

7. Risoluzione Dei Problemi

• L'unità non si accende: Check the power cord connection to both the unit and the electrical outlet. Ensure the outlet is functional.
• Letture imprecise di CO2: Verify the remote sensor is properly connected and its vents are unobstructed. Ensure the sensor is placed in an area representative of the environment you wish to monitor, away from direct CO2 sources or strong air currents.
• CO2 Equipment Not Activating/Deactivating: Check your CO2 setpoint and deadband settings. Ensure the CO2 equipment is properly connected to the controller's output and is functioning correctly independently.
• Indicatori LED non funzionanti: If any LED indicators are not lighting up as expected, consult the operating instructions for their intended behavior. If the issue persists, contact customer support.

8. Specifiche

9. Informazioni sulla garanzia

The Autopilot APC8200 CO2 Monitor & Controller comes with a Garanzia del produttore di 3 anno. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your product or visit the official Autopilot websito.

10. Supporto

For technical assistance, troubleshooting, or general inquiries regarding your Autopilot APC8200 CO2 Monitor & Controller, please contact Autopilot customer support or the seller from whom you purchased the product. You may find additional resources and FAQs on the official Autopilot websito.

Manufacturer: Hydrofarm

Per ulteriore assistenza, visitare il Autopilot Store on Amazon.