1. Introduzione
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your MUNBYN P068 Direct Thermal Receipt Printer. The P068 is a high-speed POS printer designed for efficient receipt printing, featuring an auto-cutter and multiple connectivity options.
Figure 1.1: MUNBYN P068 Direct Thermal Receipt Printer
Caratteristiche principali:
- High-speed printing up to 300mm/sec.
- Automatic paper cutter for neat receipt separation.
- Incoming order reminder with sound and light indicator (can be disabled).
- DIP switches for direct configuration of print functions.
- Multiple interface connections: USB, Serial, and Ethernet.
- Wall-hanging design for flexible placement.
2. Configurazione e installazione
2.1 Disimballaggio e ispezione iniziale
Carefully remove the printer from its packaging. Verify that all components are present: the printer unit, power adapter, USB cable, and any included documentation. Inspect the printer for any signs of physical damage.
2.2 Collegamento della stampante
The MUNBYN P068 supports USB, Serial, and Ethernet connections. Choose the appropriate connection method for your POS system.
Figure 2.1: Three Interfaces Connection
- Connessione USB: Connect the square end of the USB cable to the printer's USB port and the rectangular end to an available USB port on your computer or POS system.
- Connessione seriale: Collegare il cavo seriale alla porta seriale della stampante e alla porta seriale del computer o del sistema POS.
- Connessione Ethernet (LAN): Connect an Ethernet cable from the printer's LAN port to your network router or switch. This method requires network configuration.
- Collegamento elettrico: Connect the power adapter to the printer's power input and then plug it into a suitable power outlet.
2.3 Installazione del driver
For proper functionality, especially with Windows-based systems, you will need to install the printer driver. The driver can typically be found on the manufacturer's website or on an included CD/USB drive. Follow the on-screen instructions during installation.
2.4 Caricamento della carta termica
The printer uses 80mm wide thermal paper rolls. To load paper:
- Open the paper cover by pressing the release latch.
- Insert the thermal paper roll with the paper feeding from the bottom, ensuring the leading edge is straight.
- Estrarre una piccola quantità di carta dalla taglierina.
- Chiudere saldamente il coperchio della carta finché non scatta in posizione.
Figure 2.2: Maximum Paper Roll Size and Loading
2.5 Impostazioni dell'interruttore DIP
The printer features DIP switches on the bottom for direct configuration of various functions without requiring software adjustments. These include settings for the auto-cutter, beeper, print density, and character codes.
Figure 2.3: DIP Switch Functions
Refer to the table in Figure 2.3 for specific switch functions and their corresponding ON/OFF positions. Use a small tool to adjust the switches.
2.6 Wall Hanging Design
The MUNBYN P068 printer supports wall mounting. Two hanging holes are located on the bottom of the printer for this purpose, allowing for space-saving installation in various environments such as kitchens or retail counters.
Figura 2.4: Design del montaggio a parete
3. Utilizzo della stampante
3.1 Accensione/Spegnimento
To power on the printer, press the power switch located on the front or side of the unit. The indicator lights will illuminate. To power off, press the switch again.
3.2 Stampa delle ricevute
Once connected and drivers are installed, the printer will receive print commands from your POS software or application. Ensure the paper roll is correctly loaded before initiating print jobs.
Figure 3.1: High-Speed Printing Mechanism
3.3 Automatic Paper Cutter
The integrated auto-cutter will automatically cut receipts after each print job, ensuring clean and organized output. This feature can be enabled or disabled via the DIP switches.
3.4 Incoming Order Reminder
The printer is equipped with an incoming order reminder system, which includes a sound and light indicator. This feature alerts staff to new orders, helping to prevent missed transactions. The reminder system can be configured or closed using the DIP switches.
4. Manutenzione
4.1 Pulizia della stampante
Una pulizia regolare aiuta a mantenere la qualità di stampa e prolunga la durata della stampante.
- Testina di stampa: Utilizzare un batuffolo di cotone leggermenteampened with isopropyl alcohol to gently wipe the thermal print head. Allow it to dry completely before use. Clean the print head regularly, especially if print quality degrades.
- Percorso carta: Rimuovere la polvere o i detriti di carta dal percorso della carta utilizzando una spazzola morbida o aria compressa.
- Esterno: Pulire l'esterno della stampante con un panno morbido eamp stoffa. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
4.2 Sostituzione del rotolo di carta
When the paper roll is nearing its end, a red line may appear on the receipt, or the printer may stop feeding paper. Follow the instructions in Section 2.4 to replace the paper roll.
5. Risoluzione Dei Problemi
This section addresses common issues you might encounter with your MUNBYN P068 printer.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La stampante non si accende | Power cable loose; power outlet faulty; printer switch off. | Check power connections; try a different outlet; ensure power switch is ON. |
| No printing / Blank receipts | Paper loaded incorrectly (upside down); out of paper; driver not installed; incorrect port selected. | Reload paper correctly (thermal side facing print head); replace paper roll; install/reinstall driver; verify port settings in software. |
| Receipts cut off / Incorrect margins | Incorrect paper size setting in driver; DIP switch settings. | Verify paper size (80mm) in printer driver settings. Check DIP switch settings for character per line or other print density options. |
| Stampante non riconosciuta dal computer | USB/Serial/Ethernet cable loose or faulty; driver not installed or corrupted. | Check cable connections; try a different cable or port; reinstall printer driver. |
| Taglierina automatica non funzionante | DIP switch for cutter is OFF; paper jam. | Check DIP switch settings (SW-1) to ensure auto-cutter is ON. Clear any paper jams. |
| Problemi di compatibilità | Printer not compatible with specific POS systems or operating systems. | Note: This printer is generally not compatible with iOS devices (iPad, iPhone), DoorDash, Square, or Ubereats. Always verify compatibility with your POS system before purchase. |
5.1 POS System Compatibility
It is important to note that the MUNBYN P068 printer has specific compatibility limitations. It is generally non compatibile with iOS devices (such as iPad and iPhone), DoorDash, Square, or Ubereats. For other POS systems, please refer to the compatibility chart below or contact MUNBYN support for verification.
Figure 5.1: POS System Compatibility Chart
6. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Nome del modello | ITPP068 |
| Tecnologia di stampa | Termico |
| Velocità di stampa massima (monocromatica) | 300 mm/sec |
| Risoluzione massima di stampa in bianco e nero | 203 dpi |
| Tecnologia di connettività | USB, Ethernet, seriale |
| Caratteristica speciale | Auto-cutter |
| Dimensione massima del supporto | 7.62cm x 22.86cm (3 1/8" x 230' Inches) |
| Dimensioni del prodotto | 7.8 x 5.8 x 5.4 pollici (5.8"P x 7.8"L x 5.4"A) |
| Peso dell'articolo | 5.15 libbre |
| Colore | Nero |
| Dispositivi compatibili | Laptops (Windows OS) |
| Tipo di inchiostro della stampante | Senza inchiostro (termica) |
| Codice UPC | 653334974457 |
7. Garanzia e supporto
7.1 Informazioni sulla garanzia
The MUNBYN P068 Receipt Printer comes with a Full Warranty, typically covering the product for 2 years from the date of purchase. Please refer to your purchase documentation or the official MUNBYN websito per termini e condizioni di garanzia specifici.
7.2 Assistenza clienti
MUNBYN offers comprehensive customer support to assist with any inquiries or issues you may encounter.
Figure 7.1: MUNBYN Support Services
- Servizio 24 ore su 7, XNUMX giorni su XNUMX: L'assistenza è disponibile 24 ore su 24.
- Configurazione remota: Support for setting up your printer remotely.
- Local Tech Support: Access to local technical assistance.
- Video tutorial: Instructional videos are available to guide you through various processes.
For support, please visit the official MUNBYN website or contact their customer service directly using the contact information provided with your product or on their websito.
