mDesign Metal Wall Mounted Paper Towel Holder

1. Introduzione

Thank you for choosing the mDesign Metal Wall Mounted Paper Towel Holder. This manual provides essential information for the proper installation, operation, and maintenance of your new paper towel dispenser. Please read these instructions carefully before installation and retain them for future reference.

This product is designed to store and dispense standard and jumbo paper towel rolls, offering a space-saving solution for your kitchen, pantry, or utility areas.

Image: The mDesign Metal Wall Mounted Paper Towel Holder, featuring a polished stainless steel finish.

2. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• 1 x mDesign Metal Wall Mounted Paper Towel Holder
• Hardware di montaggio (viti e tasselli a muro)

Image: Included mounting hardware, consisting of four screws and four grey wall anchors.

3. Specifiche

Image: Dimensional diagram of the mDesign paper towel holder.

4. Informazioni sulla sicurezza

• Always use appropriate tools for installation.
• Ensure the mounting surface is suitable and can support the weight of the holder and a full paper towel roll.
• Keep small parts (screws, anchors) away from children to prevent choking hazards.
• Avoid over-tightening screws during installation to prevent damage to the product or mounting surface.

5. Configurazione e installazione

This paper towel holder can be mounted vertically or horizontally on a wall or under a cabinet. Installation requires basic tools (not included): a pencil, a drill, and a screwdriver.

Fasi di installazione:

1. Scegli la posizione: Select a suitable location for mounting. Consider accessibility and clearance for paper towel rolls. The holder can be mounted on a wall, under a cabinet, or inside a cabinet door.
2. Segna i punti di perforazione: Hold the paper towel holder in the desired position. Use a pencil to mark the locations for the two mounting screws through the pre-drilled holes on the holder's backplate.
3. Praticare i fori pilota: Using a drill, create pilot holes at the marked locations. The size of the drill bit should be appropriate for the included wall anchors (if drilling into drywall) or slightly smaller than the screw diameter (if drilling into wood).
4. Inserire gli ancoraggi a parete (se necessario): If mounting into drywall, gently tap the plastic wall anchors into the pilot holes until they are flush with the surface.
5. Montare il supporto: Align the paper towel holder with the drilled holes (or anchors). Insert the provided screws through the holder's mounting holes and into the pilot holes/anchors.
6. Fissare il supporto: Use a screwdriver to tighten the screws until the holder is firmly secured to the surface. Do not overtighten.

Image: The paper towel holder installed horizontally on a wall, holding a standard paper towel roll.

6. Istruzioni per l'uso

Inserting a Paper Towel Roll:

1. Ensure the holder is securely mounted.
2. Slide a standard or jumbo paper towel roll onto the holder's bar. The open end of the holder allows for easy loading.

Distribuzione di asciugamani di carta:

• Pull the desired amount of paper towel from the roll.
• Tear the paper towel against the edge of the holder or by hand.

7. Manutenzione

To maintain the appearance and functionality of your mDesign Paper Towel Holder:

• Pulizia: Pulire regolarmente il supporto con un panno morbido e asciutto.amp panno. Per le macchie ostinate, si può usare una soluzione di sapone delicato.
• Essiccazione: Dry thoroughly with a soft cloth to prevent water spots, especially on the polished stainless steel finish.
• Evitare detergenti aggressivi: Non utilizzare detergenti abrasivi, pagliette o solventi chimici, poiché potrebbero danneggiare la finitura.

8. Risoluzione Dei Problemi

If you encounter issues with your paper towel holder, consider the following:

• Holder si sente rilassato: Check the mounting screws. Tighten them gently if they have become loose over time. Ensure the wall anchors (if used) are properly seated.
• Paper towel roll does not turn smoothly: Ensure the roll is properly centered on the holder. Verify that the roll is not too wide for the holder's design (maximum width is approximately 11.5 inches).
• Graffi sulla superficie: Polished stainless steel can show minor scratches from abrasive contact. Follow maintenance guidelines to prevent further damage.

9. Garanzia e supporto

For warranty information or product support, please contact mDesign customer service. Refer to the product packaging or the mDesign official websito per i dettagli di contatto più aggiornati.

Please have your model number (8769MDK) and purchase date available when contacting support.