1. Introduzione
This manual provides detailed instructions for the GANA HS-PT-1080P 3-Port HDMI Switch. This device allows you to connect up to three HDMI source devices to a single HDMI display, eliminating the need to constantly swap cables. It supports Full HD 1080p resolution and 3D video, ensuring optimal and lossless signal transmission.
Le caratteristiche principali includono:
- Supports Full HD 1080p (1920x1080P) and 3D video.
- 3 HDMI input ports and 1 HDMI output port.
- Plug and Play operation; no external power required.
- Gold-plated connectors for enhanced signal performance.
- HD Audio and HDCP compliant.
2. Prodotto finitoview
The GANA HS-PT-1080P HDMI Switch is designed for simplicity and efficiency. It features three HDMI input ports, one HDMI output cable, and a manual selection button with corresponding LED indicators to show the active input.
2.1 Componenti
- Porte di ingresso HDMI (x3): Connect your source devices (e.g., game console, Blu-ray player, laptop).
- HDMI Output Cable (x1): Si collega al dispositivo di visualizzazione (ad esempio, TV, monitor, proiettore).
- Seleziona pulsante: Used to manually switch between the connected HDMI input sources.
- Indicatori LED (x3): Light up to indicate which HDMI input port is currently active.
3. Istruzioni per l'installazione
Follow these steps to set up your GANA HDMI Switch:
- Uscita di connessione: Plug the integrated HDMI output cable from the GANA HDMI Switch into an available HDMI input port on your display device (TV, monitor, or projector).
- Collegare i dispositivi di input: Connect your HDMI source devices (e.g., TV Box, Xbox, PlayStation, PC, Blu-ray player) to the HDMI Input 1, Input 2, and Input 3 ports on the GANA HDMI Switch.
- Accensione: Ensure all connected devices and your display are powered on. The HDMI switch is 'Plug and Play' and draws power directly from the connected HDMI sources, so no external power adapter is needed.
- Seleziona fonte: Use the 'Select' button on the HDMI switch to choose the desired input source. The corresponding LED indicator will illuminate to show the active input.
4. Istruzioni per l'uso
Operating the GANA HDMI Switch is straightforward:
- Automatic Input Detection: The switch may automatically detect and switch to a newly powered-on HDMI source.
- Manual Input Selection: To switch between active HDMI sources, press the 'Select' button located on the top of the switch. Each press will cycle through the available inputs (Input 1 → Input 2 → Input 3 → Input 1).
- Indicatori LED: Observe the LED indicators (1, 2, 3) next to the 'Select' button. The illuminated LED corresponds to the currently active HDMI input.
5. Manutenzione
To ensure the longevity and optimal performance of your GANA HDMI Switch, follow these maintenance guidelines:
- Pulizia: Use a soft, dry cloth to clean the exterior of the switch. Avoid using liquid cleaners or abrasive materials, as they may damage the device.
- Magazzinaggio: Store the switch in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Gestione: Handle the device and its connectors with care. Avoid bending or pulling the HDMI cables excessively, which can damage the internal wiring or ports.
- Ambiente: Do not expose the switch to water, moisture, or high humidity.
6. Risoluzione Dei Problemi
If you encounter issues with your GANA HDMI Switch, refer to the following troubleshooting tips:
- Nessuna immagine/segnale:
- Assicurarsi che tutti i cavi HDMI siano collegati saldamente sia ai dispositivi sorgente, allo switch, sia al display.
- Verify that the correct input source is selected on the HDMI switch (check the LED indicator).
- Confirm that your display is set to the correct HDMI input channel.
- Prova a collegare il dispositivo sorgente direttamente al display per escludere problemi con il cavo o con la sorgente.
- Restart all connected devices (source, switch, display).
- Flickering Picture or Poor Quality:
- Verificare la presenza di connessioni dei cavi allentate.
- Ensure you are using high-quality HDMI cables.
- Reduce the cable length if possible, especially for longer runs.
- Some devices may require a specific boot order. Try powering on the display first, then the HDMI switch, then the source device.
- Nessun audio:
- Verify that the audio settings on your source device are correctly configured for HDMI output.
- Controlla le impostazioni audio sul tuo dispositivo di visualizzazione.
- Ensure the HDMI cables support audio transmission.
- L'interruttore non risponde:
- Ensure at least one HDMI source device is powered on and connected to provide power to the switch.
- Disconnect and reconnect all HDMI cables to reset the connections.
7. Specifiche
| Caratteristica | Descrizione |
|---|---|
| Numero di modello | HS-PT-1080P |
| Marca | GANA |
| Porte di ingresso | 3x HDMI |
| Porte di uscita | 1x HDMI |
| Risoluzione supportata | Up to 1080p (1920x1080P), 3D |
| Tipo di connettore | Cavo HDMI |
| Alimentazione elettrica | No external power required (powered by HDMI source) |
| Dimensioni del prodotto | Dimensioni: 8.2 x 5.33 x 1.75 cm |
| Peso del prodotto | 81 grammi |
| Codice UPC | 601285150765 |
| Dispositivi compatibili | Most devices with an HDMI port |
8. Garanzia e supporto
GANA products are designed for reliability and performance. For specific warranty information regarding your GANA HS-PT-1080P HDMI Switch, please refer to the warranty card included with your purchase or visit the official GANA websito.
If you require technical assistance or have questions not covered in this manual, please contact GANA customer support through their official channels. When contacting support, please have your product model number (HS-PT-1080P) and purchase details readily available.
