1. Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Codelocks CL465 Mech Narrow Stile Latch Lockset. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lockset.
2. Prodotto finitoview
The Codelocks CL465 is a mechanical narrow stile medium-duty lockset designed for internal and external aluminum doors. It features a lever handle and a key cylinder for secure access control. This lockset is suitable for doors hung on either the left or right side and is designed as a retrofit for Adams Rite 4510 lockcases or similar ANSI round cylinder styles.
Figure 2.1: Codelocks CL465 Mech Narrow Stile Latch Lockset showing the keypad, lever handle, and key cylinder.
Caratteristiche principali:
- Mechanical operation, no batteries required.
- Stainless Steel construction for durability.
- Key cylinder for override or alternative access.
- Code Free/Passage function for unrestricted access when needed.
- 13 buttons providing over 8,000 possible combinations.
- Designed for narrow stile doors.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- CL465 Lockset (Front and Rear units)
- Mandrino
- Bulloni di fissaggio
- Cams and Threaded Cylinder
- Piastra d'urto
- Modello di installazione
- Manuale dell'utente (questo documento)
4. Configurazione e installazione
Installation should be performed by a qualified individual. Refer to the included Assembly Guide for detailed diagrams and step-by-step instructions.
4.1 Controlli pre-installazione
- Assicurarsi che lo spessore della porta sia compatibile con la serratura.
- Confirm the lockset is suitable for your door type (internal/external aluminum doors).
- Verify door handing (left or right) for correct lever orientation.
4.2 Impostazione del codice
The lockset is supplied with a random code commencing with the "C" clear button. To change the code:
- Remove the back plate of the lockset.
- Locate the code tumblers.
- Using a small screwdriver, rotate the colored tumblers to set your desired code. Ensure the "C" button is always part of the code.
- Sostituire la piastra posteriore.
Importante: Always test the new code multiple times before closing the door.
4.3 Mounting the Lockset
- Prepare the door using the provided template for drilling holes.
- Installare il meccanismo di chiusura nel bordo della porta.
- Insert the spindle through the latch.
- Mount the exterior and interior lockset units, ensuring the spindle engages correctly.
- Secure the units with the provided fixing bolts.
- Installare la piastra di battuta sul telaio della porta, allineandola con il chiavistello.
5. Istruzioni per l'uso
5.1 Apertura con codice
- Press the "C" (Clear) button to reset any previous entries.
- Enter your programmed code in any sequence.
- Rotate the lever handle to open the door.
5.2 Opening with Key
Insert the key into the key cylinder and turn to unlock the mechanism. Rotate the lever handle to open the door.
5.3 Code Free / Passage Function
The CL465 features a passage function allowing the door to be opened without a code. Consult the Assembly Guide for specific instructions on engaging and disengaging this mode, typically involving a small switch or pin on the interior unit.
5.4 Chiusura della porta
The lock automatically secures when the door is closed. No action is required to lock the door from the outside once the code is disengaged, or from the inside unless the passage function is active.
6. Manutenzione
Regular maintenance ensures optimal performance and extends the life of your Codelocks CL465 lockset.
- Pulizia: Wipe the lockset with a soft, damp panno. Evitare detergenti abrasivi o solventi che potrebbero danneggiare la finitura.
- Lubrificazione: Periodically apply a small amount of silicone-based lubricant to the latch bolt and key cylinder to ensure smooth operation. Do not use oil-based lubricants.
- Ispezione: Check all screws and fixings periodically to ensure they are tight. Inspect the lever handles and keypad for any signs of wear or damage.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Lever handle spins freely without opening. | Incorrect code entered or spindle not engaged. | Ensure correct code is entered after pressing 'C'. Check spindle engagement during installation. |
| I pulsanti sono rigidi o non rispondono. | Accumulo di sporcizia o problema al meccanismo interno. | Clean the keypad surface. If problem persists, contact support. |
| La porta non si chiude correttamente. | Misalignment of strike plate or latch bolt. | Adjust the strike plate position. Check for obstructions around the latch bolt. |
| La chiave non gira o è dura. | Debris in cylinder or lack of lubrication. | Apply silicone-based lubricant to the key cylinder. Do not force the key. |
8. Specifiche
| Attributo | Dettaglio |
|---|---|
| Marca | Serrature a codice |
| Nome del modello | CL465 (Part Number: CL465-SS) |
| Materiale | Acciaio inossidabile |
| Tipo di finitura | Lucido |
| Tipo di blocco | Key Lock, Mechanical Code |
| Caratteristica speciale | Key Lock, Code Free/Passage Function |
| Dimensioni articolo (L x P x A) | 7.25 x 1.56 x 5.56 pollici |
| Peso dell'articolo | 8 libbre |
| Combinazioni | Over 8,000 possible combinations (13 buttons) |
| Compatibilità | Retrofit for Adams Rite 4510 lockcase or similar ANSI round cylinder |
9. Garanzia e supporto
For warranty information and technical support, please refer to the official Codelocks websito o contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto.
Produttore: Serrature a codice
Websito: www.codelocks.com (Note: This is a generic placeholder URL, please refer to your product packaging or official documentation for the exact support contact details.)
