1. Introduzione
The OSRAM eldoLED Optotronic LED Driver OT Programmer is a specialized tool designed for programming single, non-DALI OPTOTRONIC LED drivers. This device facilitates quick and efficient configuration of LED drivers using the Tuner4TRONIC software via a standard USB interface. It allows for programming without the need to apply mains voltage to the driver, streamlining the setup process for professional lighting installations.
This manual provides essential information for the safe and effective use of your OT Programmer, including setup, operation, maintenance, and technical specifications.
Image 1.1: eldoLED Optotronic OT Programmer with a connected programming cable, showing the USB and programming ports.
2. Informazioni sulla sicurezza
Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di utilizzare il dispositivo. La mancata osservanza di queste istruzioni può causare scosse elettriche, incendi o lesioni gravi.
- Solo professionisti qualificati: This device is intended to be used by qualified professionals only.
- Leggi le istruzioni: Always read the complete installation and operating instructions before use.
- No AC Connection: Do not connect the OT Programmer to an AC (mains) line. The unit is powered exclusively through its USB port.
- Temperatura di esercizio: Ensure the ambient temperature range is between 0°C and +50°C (32°F to 122°F) during operation.
- Compatibilità: This programmer is suitable only for non-DALI OPTOTRONIC devices that utilize the Prog +/- interface.
The device complies with FCC 47 CFR part 15, Class A, IEC 60950-1, and IEC 55022 standards.
3. Impostazione
Follow these steps to set up your OT Programmer for use:
3.1. Installazione del software
The OT Programmer requires the Tuner4TRONIC software for operation. This software is essential for configuring your LED drivers.
- Scarica il software: Obtain the latest version of the Tuner4TRONIC software from the official eldoLED webposto. Visitare www.eldoLED.com/contact for download links and support.
- Installa il software: Follow the on-screen instructions to install Tuner4TRONIC on your computer.
3.2. Connecting the Programmer
The OT Programmer is powered and communicates via a standard USB connection.
- Connessione al computer: Use a standard USB cable to connect the OT Programmer to an available USB 2.0 port on your computer. The unit will power on automatically.
- Connect to LED Driver: Connect the programming cable from the OT Programmer's "Program (+)/(-)" interface to the corresponding Prog +/- interface on the non-DALI OPTOTRONIC LED driver you wish to program.
Immagine 3.1: In alto view of the eldoLED Optotronic OT Programmer, highlighting the USB 2.0 port and the Program (+)/(-) interface.
4. Istruzioni per l'uso
Once the hardware is connected and the Tuner4TRONIC software is installed, you can proceed with programming your LED drivers.
- Launch Tuner4TRONIC: Open the Tuner4TRONIC software on your computer.
- Riconoscimento del dispositivo: The software should automatically detect the connected OT Programmer and the LED driver. If not, check your connections and ensure the software is up to date.
- Configure Driver: Use the Tuner4TRONIC interface to select the desired parameters and settings for your OPTOTRONIC LED driver.
- Program Driver: Initiate the programming process through the software. The OT Programmer will transfer the settings to the LED driver. This process is typically very fast.
- Verifica le impostazioni: After programming, it is recommended to verify the settings within the Tuner4TRONIC software to ensure successful configuration.
5. Manutenzione
The OT Programmer is designed for durability and requires minimal maintenance.
- Pulizia: Mantenere il dispositivo pulito e privo di polvere. Utilizzare un panno morbido e asciutto per la pulizia. Non utilizzare detergenti liquidi o solventi.
- Magazzinaggio: Store the programmer in a dry, cool environment when not in use.
- Cura del cavo: Handle USB and programming cables with care to prevent damage to connectors and wires.
6. Risoluzione Dei Problemi
If you encounter issues with your OT Programmer, refer to the following common troubleshooting steps:
- Programmer Not Recognized:
- Assicurarsi che il cavo USB sia collegato saldamente sia al programmatore che al computer.
- Prova una porta USB diversa sul tuo computer.
- Verify that the Tuner4TRONIC software is correctly installed and up to date.
- Riavvia il computer.
- LED Driver Not Detected:
- Confirm that the programming cable is correctly connected to the Prog +/- interface of the LED driver.
- Ensure the LED driver is a compatible non-DALI OPTOTRONIC device with the Prog +/- interface.
- Check for any physical damage to the programming cable or the driver's interface.
- Errori di programmazione:
- Refer to the Tuner4TRONIC software documentation for specific error codes and solutions.
- Ensure the LED driver is in a ready state for programming.
For persistent issues, contact customer support as detailed in Section 8.
7. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | 4052899209640 |
| Numero di parte | 4052899209640 |
| Volume Nominaletage | 5.00 V (alimentato tramite USB) |
| Frequenza di rete | 0 Hz (Not connected to AC) |
| Dimensioni del prodotto (L x P x A) | 4.7 x 3 x 1.1 pollici (119.4 x 76.2 x 27.9 mm) |
| Peso del prodotto | 4 once (113.4 grammi) |
| Intervallo di temperatura ambiente | da 0°C a +50°C (da 32°F a 122°F) |
| Materiale | Rame (componenti interni) |
| Interfaccia | USB 2.0, Prog +/- |
| Compatibilità | Non-DALI OPTOTRONIC devices with Prog +/- interface |
| Software richiesto | Sintonizzatore4TRONIC |
8. Garanzia e supporto
For warranty information and technical support, please refer to the official OSRAM or eldoLED website. You can typically find detailed warranty terms and contact information for support services at www.eldoLED.com/contact or through your local OSRAM/eldoLED distributor.
Quando contatti l'assistenza, tieni a portata di mano il numero di modello del tuo prodotto (4052899209640) e tutte le informazioni rilevanti sull'acquisto.
