Importanti istruzioni di sicurezza
Read all instructions before using this appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Prima di riempire o svuotare il serbatoio dell'acqua, assicurarsi sempre che l'apparecchio sia scollegato dalla presa di corrente.
- Non lasciare la scopa a vapore incustodita mentre è collegata alla presa di corrente o in funzione.
- Tenere bambini e animali domestici lontani dall'apparecchio quando è in uso.
- Use only distilled or demineralized water in the steam mop to prevent mineral buildup.
- Do not use the steam mop on unsealed wood floors, unglazed ceramic, or any surface that is sensitive to heat or moisture.
- Lasciare sempre raffreddare completamente l'apparecchio prima di riporlo.
Prodotto finitoview
The Black+Decker FSM13E1 Steam Mop is designed for efficient and hygienic cleaning of sealed hard floors. Its powerful steam action eliminates 99.9% of household germs without the need for harsh chemicals.
Figura 1: Davanti view of the Black+Decker FSM13E1 Steam Mop, showcasinil suo design elegante e la sua maniglia.
Figura 2: Angolato view of the steam mop, highlighting the water tank and control buttons.
Impostare
- Montare la maniglia: Inserire la maniglia nel corpo principale del pulitore a vapore finché non scatta saldamente in posizione.
- Applicare il cuscinetto in microfibra: Place the microfiber cleaning pad onto the bottom of the mop head, ensuring it is centered and securely attached. The pad is designed for easy attachment and removal.
- Riempi il serbatoio dell'acqua: Open the water tank cap. Using a measuring cup, fill the water tank with clean, distilled or demineralized water. Do not overfill. Close the cap securely. The tank capacity is approximately 380 milliliters.
- Collegare: Collegare il cavo di alimentazione a una presa elettrica dotata di messa a terra.
Figura 3: Demonstrates the process of filling the water tank with water, ensuring proper hydration for steam generation.
Istruzioni per l'uso
- Accensione: Press the power button. The steam mop will heat up and be ready for use in approximately 25 seconds.
- Inizia la pulizia: Once heated, move the steam mop across the sealed hard floor surface. The 180° swivel foot allows for easy maneuverability around furniture and into corners.
- Produzione di vapore: The mop provides continuous high-temperature steam for effective cleaning and sanitization.
- Ricarica: If the water tank becomes empty during use, unplug the unit, allow it to cool slightly, and refill as per step 3 in the Setup section.
- Spegni: When finished cleaning, press the power button to turn off the unit and unplug it from the electrical outlet.
Figura 4: A user operating the steam mop on a hard floor, demonstrating its ease of use.
Figura 5: The steam mop reaching under furniture, showcasing il suo design flessibile.
Manutenzione
- Pulizia del panno in microfibra: The microfiber pad can be easily removed and is machine washable. Wash with similar colors and air dry for best results. Do not use bleach or fabric softeners.
- Svuotamento del serbatoio dell'acqua: After each use, empty any remaining water from the tank. This helps prevent mineral buildup and prolongs the life of the appliance.
- Descaling (Periodic): Depending on water hardness, periodic descaling may be necessary. Consult the full product manual for detailed descaling instructions.
- Magazzinaggio: Store the steam mop in a dry, cool place. Ensure the power cord is neatly wrapped.
Figura 6: Illustration of how to easily remove the microfiber cleaning pad from the mop head for washing.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Non viene prodotto vapore. | Il serbatoio dell'acqua è vuoto. Appliance not plugged in or not powered on. Unit not heated up. | Riempire il serbatoio dell'acqua. Ensure unit is properly plugged in and power button is pressed. Wait approximately 25 seconds for the unit to heat. |
| Il mocio lascia delle striature. | Il tampone in microfibra è sporco. Troppa acqua/vapore. | Clean or replace microfiber pad. Ensure pad is not oversaturated. |
| L'apparecchio non si accende. | Nessuna corrente alla presa. Cavo di alimentazione danneggiato. | Check power outlet with another appliance. Do not use if power cord is damaged; contact customer support. |
Specifiche
- Modello: FSM13E1
- Energia: 1300 Watt
- Voltage: 230 Volt
- Capacità del serbatoio dell'acqua: Approximately 380 Milliliters
- Tempo di riscaldamento: Circa 25 secondi
- Peso: 1.75 chilogrammi
- Dimensioni (L x P x A): Dimensioni: 70.2 x 19.3 x 11.7 cm
- Caratteristiche: Lightweight, Portable, 180° Swivel Foot
Garanzia e supporto
BLACK+DECKER products are manufactured to high quality standards and are guaranteed for professional and domestic use. For detailed warranty information, product registration, or technical support, please visit the official BLACK+DECKER websito o contattare il loro servizio clienti.
Supporto online: www.blackanddecker.com
Assistenza clienti: Refer to your regional BLACK+DECKER contact information for phone support.
