Dracast BoltRay Plus Bi-Color LED600 3-Light Kit Instruction Manual

1. Introduzione e informazioni sulla sicurezza

This manual provides essential instructions for the safe and effective operation of your Dracast BoltRay Plus Bi-Color LED600 3-Light Kit. Please read this manual thoroughly before use and retain it for future reference.

Importanti precauzioni di sicurezza:

• Non utilizzare l'unità con le mani bagnate o in prossimità di acqua.
• Assicurare una ventilazione adeguata per evitare il surriscaldamento. Non bloccare le aperture di ventilazione.
• Use only the specified power adapter. Disconnect power before cleaning or servicing.
• Evitare l'esposizione diretta degli occhi alla sorgente luminosa a LED.
• Keep the equipment away from flammable materials.
• Non tentare di smontare o modificare l'unità. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.
• Securely mount the lights to prevent accidental falls.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano presenti nel tuo kit:

• 3x Dracast BoltRay LED600 Plus Bi-Color Light Fixtures
• 3x 4-Way Barndoors
• 3x Removable Diffusion Filters
• 3x Mounting Yokes (pre-attached to lights)
• 3 telecomandi
• 3x Multi-Voltage AC Power Adapters
• 1x Soft Nylon Carrying Case
• 1x Injection-Molded Travel Case

Image 2.1: All components of the Dracast BoltRay Plus LED600 3-Light Kit laid out, including three light fixtures, barndoors, diffusion filters, power adapters, remote controls, and carrying cases.

Image 2.2: The Dracast BoltRay Plus LED600 3-Light Kit fully assembled on light stands, with the soft nylon carrying case in the foreground.

3. Impostazione

Follow these steps to set up your Dracast BoltRay Plus LED600 light fixture:

1. Montaggio della luce: Attach the light fixture, using its integrated U-shaped yoke, to a compatible light stand or mounting accessory. Ensure the mounting knob is securely tightened.
2. Fissaggio delle alette: Align the 4-way barndoors with the front of the light fixture and secure them using the locking mechanism. The barndoors allow for shaping the light beam.
3. Installing Diffusion Filter: If softer light is desired, insert the removable diffusion filter into the designated slot on the front of the light, behind the barndoors.
4. Alimentare la luce:
   • Alimentazione CA: Collegare il multi-voltage AC power adapter to the DC input port on the light fixture. Plug the other end into a suitable power outlet.
   • Potenza della batteria: For portable operation, insert two compatible NP-F type batteries (sold separately) into the dual battery plates on the rear of the light fixture. Ensure correct polarity.

Immagine 3.1: Un primo piano view of the Dracast BoltRay Plus LED600 light head, showing the central COB LED, attached 4-way barndoors, and the blue mounting bracket.

4. Istruzioni per l'uso

The Dracast BoltRay Plus LED600 offers precise control over light intensity and color temperature.

4.1. Funzionamento del pannello di controllo

The control panel is located on the rear of the light fixture and features an LCD digital display and control knobs.

Immagine 4.1: Lato view of the Dracast BoltRay Plus LED600 light, highlighting the rear control panel with its LCD display, control knobs, and power input ports.

• Accensione/spegnimento: Locate the power switch on the control panel and toggle it to the 'ON' position. The LCD display will illuminate.
• Adjusting Intensity (Dimming): Use the "INTENSITY" control knob to adjust the light output from 0% to 100%. The current intensity level will be shown on the LCD display.
• Regolazione della temperatura del colore: Use the "COLOR TEMP" control knob to change the color temperature from 3200K (warm tungsten) to 5600K (cool daylight). The selected color temperature will be displayed.

4.2. Funzionamento del telecomando

The included remote control allows for wireless adjustment of intensity and color temperature.

• Assicurarsi che il telecomando abbia batterie funzionanti.
• Point the remote control towards the light fixture's sensor.
• Use the designated buttons on the remote to increase/decrease intensity and adjust color temperature. Refer to the remote's markings for specific functions.

5. Manutenzione

• Pulizia: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the light fixture. Do not use harsh chemicals or abrasive cleaners.
• Magazzinaggio: When not in use, store the light kit in the provided travel case in a cool, dry place, away from direct sunlight and excessive dust.
• Cura della batteria: If using NP-F batteries, remove them from the fixture during extended periods of non-use to prevent discharge or leakage.

6. Risoluzione Dei Problemi

7. Specifiche

8. Garanzia e supporto

Dracast products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Dracast website. For technical support or service inquiries, please contact Dracast customer service directly.

Produttore: Draco Broadcast, INC.

Websito: www.dracast.com