1. Introduzione
This manual provides essential information for the proper installation, operation, and maintenance of your GROHE 29037001 3/4-Inch Bath and Shower Combination. Please read these instructions carefully before beginning installation or use to ensure safe and efficient operation. Keep this manual for future reference.
2. Informazioni sulla sicurezza
Istruzioni importanti per la sicurezza:
- L'installazione deve essere eseguita da un professionista qualificato, nel rispetto delle normative edilizie e idrauliche locali.
- Prima dell'installazione o della manutenzione, assicurarsi che l'alimentazione idrica principale sia chiusa.
- Durante l'installazione indossare adeguati dispositivi di protezione individuale (DPI).
- Do not modify the product. Use only genuine GROHE replacement parts.
- Proteggere il prodotto dal gelo.
3. Prodotto finitoview
The GROHE 29037001 is a 3/4-inch bath and shower combination designed for deck mounting. It features a polished brass finish and a single handle for water control. This unit includes an integrated drain system for managing splashing water.
Figura 1: Main unit of the GROHE 29037001 Bath and Shower Combination, showing the water inlets and outlet connections.
4. Configurazione e installazione
Strumenti e materiali necessari:
- Chiave regolabile
- Set di cacciaviti
- Nastro sigillante (nastro PTFE)
- Nastro di misurazione
- Trapano (se sono necessari nuovi fori)
4.1 Controlli pre-installazione
- Verificare che tutti i componenti siano presenti e integri.
- Ensure the mounting surface is clean, level, and structurally sound for deck mounting.
- Confirm water supply lines (hot and cold) are accessible and correctly sized (3/4-inch connections).
4.2 Informazioni dimensionali
Figura 2: Technical drawing with key dimensions for installation. Note the G 1/2 connections and overall unit width of 705mm.
Refer to Figure 2 for precise dimensions and connection points. The unit requires a minimum deck thickness of 28mm (max. 28 shown in diagram) and has G 1/2 connections for water supply.
4.3 Passaggi di installazione
- Preparare la superficie di montaggio: If installing on a new surface, cut the necessary openings according to the dimensions provided in Figure 2.
- Montare l'unità: Position the main unit into the prepared opening. Secure it to the deck using the provided mounting hardware. Ensure it is stable and level.
- Collegare l'alimentazione idrica: Connect the hot and cold water supply lines to the corresponding inlets on the unit. Use sealant tape on threaded connections to prevent leaks. The connections are 3/4-inch.
- Collegare lo scarico: Attach the integrated drain system to the appropriate waste pipe. Ensure all connections are watertight.
- Install Handle and Trim: Attach the single handle and any decorative trim pieces according to the specific instructions provided with those components (if separate).
- Test per perdite: Aprire lentamente l'alimentazione idrica principale e controllare che tutti i collegamenti non presentino perdite. Riparare immediatamente eventuali perdite.
5. Istruzioni per l'uso
The GROHE 29037001 features a single handle for controlling both water flow and temperature.
- Flusso d'acqua: Lift the handle to increase water flow. Push down to decrease or stop the flow.
- Controllo della temperatura: Rotate the handle left for hot water and right for cold water. Adjust gradually to achieve the desired temperature.
- Shower/Bath Diverter: If a diverter is integrated into the handle or a separate component, operate it to switch between bath spout and showerhead functions.
6. Manutenzione
Regular maintenance ensures the longevity and optimal performance of your GROHE bath and shower combination.
6.1 Pulizia
- Clean the polished brass finish with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for brass fixtures.
- Evitare detergenti abrasivi, pagliette o prodotti chimici aggressivi, poiché potrebbero danneggiare la finitura.
- Dopo la pulizia, sciacquare abbondantemente con acqua pulita e asciugare con un panno morbido.
6.2 Manutenzione della cartuccia
If water flow decreases or temperature control becomes inconsistent, the ceramic cartridge may require cleaning or replacement. This procedure should ideally be performed by a qualified plumber.
6.3 Protezione dal gelo
In areas prone to freezing temperatures, ensure the product and associated pipework are adequately protected from frost to prevent damage.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Basso flusso d'acqua | Clogged aerator or cartridge; partially closed stopcock; low water pressure. | Clean or replace aerator/cartridge; ensure stopcocks are fully open; check household water pressure. |
| Perdite d'acqua dai collegamenti | Loose connections; worn seals/gaskets; improper sealant application. | Tighten connections; replace seals/gaskets; reapply sealant tape. |
| Temperatura dell'acqua incoerente | Faulty cartridge; issues with hot/cold water supply. | Inspect or replace cartridge; check hot/cold water supply lines for blockages or pressure imbalances. |
| Rubinetto che gocciola | Worn cartridge or seals. | Replace cartridge or seals. |
If troubleshooting steps do not resolve the issue, contact a qualified plumber or GROHE customer support.
8. Specifiche
- Modello: GROHE 29037001
- Tipo: Bath and Shower Combination
- Tipo di montaggio: Montaggio su ponte, diffuso
- Materiale: Ottone
- Fine: Lucido
- Colore: Silver (Silber)
- Numero di maniglie: 1
- Dimensione connessione: 3/4-inch (G 1/2 for some internal connections as per diagram)
- Peso dell'articolo: Circa 7.66 kg (16.85 libbre)
- Dimensioni del prodotto: 34.06 x 14.76 x 7.09 pollici (86.5 x 37.5 x 18 cm)
- Componenti inclusi: GROHE 29037001 Bath and Shower Combination 3/4"
9. Garanzia e supporto
Per informazioni sulla garanzia e sull'assistenza clienti, fare riferimento al sito ufficiale GROHE webo contattare il rivenditore GROHE locale. Conservare la prova d'acquisto per eventuali reclami in garanzia.
GROHE Ufficiale Websito: www.grohe.com
