Full-Size Conversion Kit Bed Rails Instruction Manual

Informazioni importanti sulla sicurezza

Please read all instructions carefully before assembly and use of this conversion kit. Failure to follow these instructions could result in serious injury or death.

• Durante il montaggio, tenere tutte le parti di piccole dimensioni fuori dalla portata dei bambini.
• Assicurarsi che tutta la ferramenta sia ben serrata prima dell'uso. Controllare periodicamente la ferramenta e serrarla nuovamente se necessario.
• Do not substitute parts. Use only the hardware provided by the manufacturer.
• This conversion kit is designed to convert a compatible crib into a full-size bed. It is not intended for use as a standalone bed frame without a compatible headboard and footboard.
• The converted bed supports up to 600 pounds when used with additional slats (sold separately). Ensure adequate mattress support is in place.
• Always place the bed on a level surface.

Prodotto finitoview

The CC KITS Full-Size Conversion Kit allows you to transform your compatible Namesake (formerly Million Dollar Baby) convertible crib into a full-size bed. This kit utilizes your existing crib's headboard and footboard, providing a seamless transition and extending the lifespan of your nursery furniture. The rails are constructed from 100% solid wood for durability.

Image: Crib converted to a full-size bed, illustrating the use of conversion rails, additional slats, and a mattress.

Compatibilità

This conversion kit is designed for specific Namesake (formerly Million Dollar Baby) convertible crib models. Please verify your crib model number for correct compatibility.

Model #M4799/M5789 Compatibility:

• Ashbury (M8201)
• Brimsley Tambour (M26701)
• Etienne (M15701)
• Foothill (M3901)
• Liberty (M7141)
• Louis (M3401)
• Wembley (M10901)

If your crib model or finish is not listed, contact CC KITS for assistance in finding the correct conversion kit.

Image: Ashbury Crib conversion examplui.

Image: Etienne Crib conversion examplui.

Image: Foothill Crib conversion examplui.

Image: Louis Crib conversion examplui.

Model #M7689 Compatibility (for reference):

• Arcadia (M8901)
• Darlington (M15801)
• Durham Cribs purchased 2021 & later (M18301)
• Eloise (M24801)
• Emma Regency (M10701)
• Palermo (M17301)
• Rhodes (M20401)
• Strathmore (M5401)
• Sullivan (M9201)
• Tillsdale (M9601)
• Wakefield (M7701)

Contenuto della confezione

Prima di iniziare il montaggio, verificare che tutti i componenti siano presenti.

For Kit #M5789:

• Two (2) Wooden Bed Rails
• Four (4) Slats
• Pacchetto hardware
• Manuale di istruzioni

For Kit #M4799/M5789:

• Two (2) Wooden Bed Rails
• Pacchetto hardware
• Manuale di istruzioni

Note: Additional slats or a box spring are recommended for optimal mattress support and are sold separately.

Configurazione e installazione

The conversion process typically takes 20-30 minutes. Ensure you have adequate space and the necessary tools (e.g., screwdriver, Allen wrench, if not included).

1. Preparare la culla: Disassemble the front and back panels of your convertible crib, retaining the headboard and footboard. Remove any existing mattress supports or spring frames.
2. Attach Bed Rails: Align the conversion bed rails with the pre-drilled holes on your crib's headboard and footboard. Secure the rails using the provided hardware. Ensure all connections are tight and stable.
3. Installare il supporto per il materasso: If your kit includes slats, evenly space and secure them across the bed rails. If your kit does not include slats or you require additional support, install a box spring or additional slats (sold separately).
4. Posizionare il materasso: Position your full-size mattress (and box spring, if used) onto the installed support system.

Image: Comparison of mattress height with slats versus a box spring.

Componenti aggiuntivi opzionali:

• Safety Bed Rail Guard: For toddlers transitioning to a full-size bed, a safety rail guard (sold separately) can provide added security.
• Extra Slats: To increase the weight capacity and mattress support, additional slats can be purchased.
• Materasso: A full-size mattress is required for the converted bed.

Image: Optional add-ons including slats, safety rail, and mattress.

Utilizzo

Once assembled, the full-size bed is ready for use. Ensure the mattress is properly seated on the support system. The bed is designed to accommodate a standard full-size mattress.

Manutenzione e cura

To maintain the quality and appearance of your bed rails:

• Pulisci le superfici con la pubblicitàamp panno. Evitare detergenti abrasivi o prodotti chimici aggressivi.
• Controllare periodicamente tutti i collegamenti hardware e, se necessario, stringerli per garantire la stabilità.
• Proteggere il legno da sbalzi di temperatura estremi e dalla luce solare diretta per evitare deformazioni o sbiadimenti.

Image: Non-toxic product seal.

Risoluzione dei problemi

• Il letto sembra instabile: Ensure all hardware is fully tightened. Verify that the bed rails are correctly seated in the headboard and footboard slots. Check if the bed is on a level surface.
• Mattress sags: This kit supports up to 600 lbs with additional slats. If sagging occurs, consider adding more slats or using a box spring for enhanced support.
• Parts missing: Review the 'Package Contents' section. If parts are missing, contact CC KITS customer support for assistance.
• Rails do not fit: Double-check your crib's model number against the compatibility list. If your crib is not listed, the kit may not be compatible. Contact CC KITS for guidance.

Specifiche

Image: Solid wood construction detail.

Garanzia e supporto

This product is covered by a lifetime warranty, ensuring long-lasting durability and peace of mind.

For any questions, missing parts, or assistance with compatibility, please contact CC KITS customer support. Refer to the packaging or the manufacturer's websito per i contatti.