Notificatore FCM-1REL Rele indirizzabileasinManuale utente del modulo di controllo g

Model: FCM-1REL

1. Introduzione

This manual provides essential information for the proper installation, operation, and maintenance of the Notifier FCM-1REL Addressable Releasing Control Module. The FCM-1REL is designed to integrate with compatible FlashScan fire alarm control panels (FACPs) to provide addressable control for releasing applications, such as fire suppression systems.

It is imperative that all personnel involved in the installation, programming, and maintenance of this device are fully trained and qualified in fire alarm system procedures and local codes.

2. Informazioni sulla sicurezza

WARNING: Risk of Electric Shock and System Malfunction.

Installation and wiring must be performed by qualified personnel in accordance with all national and local electrical codes, regulations, and standards.
Always disconnect power from the fire alarm control panel before installing, servicing, or removing the module.
Ensure all connections are secure and correct to prevent system faults or improper operation.
This module is part of a life safety system. Any modifications or improper installation can compromise the system's integrity and effectiveness.

3. Prodotto finitoview

The Notifier FCM-1REL is an addressable control module specifically designed for releasing applications within a FlashScan intelligent fire alarm system. It allows the FACP to activate releasing devices, such as solenoids for sprinkler systems or pre-action valves, based on programmed alarm conditions.

Caratteristiche principali:

Addressable communication with FlashScan compatible FACPs.
Designed for releasinapplicazioni g.
Monitors and controls external devices.

Componenti:

The module consists of a circuit board housed within a durable plastic casing, designed for mounting in a standard electrical box. It features terminal blocks for wiring connections to the Signaling Line Circuit (SLC) and the releasing device circuit.

Notificatore FCM-1REL Rele indirizzabileasing Control Module with wiring terminals and mounting bracket

Figura 3.1: Fronte view of the Notifier FCM-1REL module, showing terminal connections for auxiliary power and SLC, along with the mounting bracket.

4. Configurazione e installazione

The FCM-1REL module is designed for mounting in a standard 4-inch square electrical box. Ensure adequate space for wiring and proper ventilation.

Fasi di installazione:

Disconnessione dell'alimentazione: Before beginning installation, ensure all power to the fire alarm control panel and associated circuits is disconnected.
Montaggio: Mount the FCM-1REL module securely into a compatible electrical box using the provided screws.
Cablaggio:
- Connect the Signaling Line Circuit (SLC) wires to the designated terminals (e.g., T1, T2). Observe polarity.
- Connect the releasing device circuit wires to the appropriate output terminals (e.g., T7, T8). Refer to the specific wiring diagram for your application.
- Connect auxiliary power (if required) to the designated terminals (e.g., T10, T11).
- Ensure all connections are tight and insulation is intact.
Impostazione dell'indirizzo: Set the module's address using the rotary switches or dip switches (if present) according to the FACP's programming requirements.
Verifica: After wiring, verify all connections are correct and secure before restoring power.

Notifier FCM-1REL module in clear plastic packaging, showing the back of the module with terminal labels

Figure 4.1: Notifier FCM-1REL module as supplied in its protective packaging, illustrating the rear view and terminal layout.

5. Istruzioni per l'uso

The Notifier FCM-1REL module operates under the control of a compatible FlashScan fire alarm control panel (FACP). Its primary function is to receive commands from the FACP to activate connected releasindispositivi g.

Funzionamento normale:

In a normal state, the module continuously monitors its connected releasing circuit and communicates its status to the FACP. The FACP will indicate a normal condition for the module's address.

Riguardareasing Operation:

Upon receiving a release command from the FACP (triggered by programmed alarm conditions), the FCM-1REL will activate its output circuit, energizing the connected releasing device (e.g., solenoid). This action initiates the release of the fire suppression agent.

Indicatori di stato:

The module may feature an LED indicator (check specific model documentation) that provides visual status:

Normale: Flashing green (typical).
Allarme/Attivo: Solid red (typical).
Guaio: Flashing amber (typical).

Refer to the FACP manual for detailed status interpretations and programming.

6. Manutenzione

Regular maintenance is crucial for the reliable operation of the FCM-1REL module and the overall fire alarm system.

Manutenzione consigliata:

Ispezione visiva: Periodically inspect the module for any signs of physical damage, loose connections, or environmental issues (e.g., moisture, excessive dust).
Test di sistema: Conduct regular system tests as required by local codes and manufacturer guidelines. This includes testing the functionality of the releasing circuit controlled by the FCM-1REL.
Pulizia: Se necessario, pulire delicatamente l'esterno del modulo con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
Documentazione: Keep accurate records of all inspections, tests, and maintenance performed.

Always refer to the fire alarm control panel's manual and relevant NFPA standards for comprehensive system maintenance procedures.

7. Risoluzione Dei Problemi

If the FCM-1REL module or the associated releasing circuit reports a trouble condition to the FACP, follow these general troubleshooting steps:

Check FACP Display: Note the specific trouble message displayed on the fire alarm control panel. This often provides valuable diagnostic information.
Ispezionare il cablaggio: Power down the FACP and visually inspect all wiring connections to the FCM-1REL module and the connected releasing device. Look for loose wires, damaged insulation, or incorrect polarity.
Verifica potenza: Ensure that the module is receiving adequate power (if auxiliary power is used).
Indirizzo del modulo: Confirm that the module's address is correctly set and matches the FACP programming.
Consult FACP Manual: Refer to the fire alarm control panel's installation and programming manual for specific troubleshooting guides related to addressable modules and releasincircuiti g.
Assistenza professionale: If the trouble persists after performing basic checks, contact a qualified fire alarm technician or Notifier technical support for further assistance.

8. Specifiche

Attributo	Dettaglio
Marca	Notifier
Numero di modello	FCM-1REL
Numero di parte	NFCM1REL
Produttore	NOTIFICA
Codice UPC	670875920668
Peso dell'articolo	2 libbre
ASIN	B07BFKBGH8

9. Garanzia e supporto

Specific warranty information for the Notifier FCM-1REL module is not provided within this document. For details regarding warranty coverage, terms, and conditions, please refer to the original product packaging, purchase documentation, or contact Notifier directly.

For technical support, installation assistance, or to report issues, please contact your authorized Notifier distributor or a qualified fire alarm system professional.

You can also visit the official Notifier websito per ulteriori risorse e informazioni di contatto.

	Scheda tecnica dei moduli di controllo e relè serie Notifier FCM-1(A) e FRM-1(A) Scheda tecnica del modulo di controllo indirizzabile FCM-1(A) e del modulo relè indirizzabile FRM-1(A) di Notifier, che descrive in dettaglio caratteristiche, applicazioni, specifiche e approvazioni dell'agenzia per i sistemi di allarme antincendio.
	Modulo di controllo supervisionato Notifier FCM-1: istruzioni per l'installazione e la manutenzione Guida dettagliata all'installazione e alla manutenzione del modulo di controllo supervisionato Notifier FCM-1, che copre specifiche, cablaggio e procedure operative per i sistemi di allarme antincendio.
	Manuale di installazione del sistema di rilevamento incendi indirizzabile intelligente Notifier AM-8000 Questo manuale di installazione fornisce una guida completa per il sistema di rilevamento incendi indirizzabile intelligente Notifier AM-8000. Copre il sistema suview, specifiche tecniche, caratteristiche elettriche, procedure di installazione, schemi elettrici, calcoli di alimentazione, collaudi e manutenzione.
	Notifier XP10-M(A) Ten-Input Monitor Module Technical Specifications Detailed technical specifications and features for the Notifier XP10-M(A) Ten-Input Monitor Module, an addressable device for intelligent alarm systems.
	Notifier FCM-1 Supervised Control Module Installation and Maintenance Instructions Installation and maintenance guide for the Notifier FCM-1 Supervised Control Module, detailing specifications, wiring, mounting, and general operation for fire alarm systems. Includes textual descriptions of diagrams.
	NOTIFIER NFS-3030 Sistema di allarme antincendio intelligente indirizzabile \| Scheda tecnica Scopri NOTIFIER NFS-3030, una centrale antincendio intelligente indirizzabile della serie ONYX. Progettata per strutture di medie e grandi dimensioni, offre rilevamento avanzato, modularità e un ampio supporto per dispositivi per applicazioni antincendio critiche.

Notifier FCM-1REL