Manuale di istruzioni dell'interruttore intelligente da parete WiFi MOES (1 gruppo, bianco)

1. Introduzione

This manual provides detailed instructions for the installation, setup, and operation of your MOES WiFi Smart Wall Light Switch (1 Gang, White). Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1: MOES WiFi Smart Wall Light Switch (1 Gang, White) - Front view of the sleek glass touch panel.

2. Informazioni importanti sulla sicurezza

• Rischio elettrico: L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutte le normative elettriche locali.
• Cavo neutro richiesto: This smart switch requires a neutral wire in your switch box to operate correctly.
• Solo Wi-Fi a 2.4 GHz: Requires a 2.4GHz Wi-Fi network connection. Not compatible with 5GHz Wi-Fi networks.
• Single Gang Compatibility: Only compatible with 1 gang switch boxes. Not compatible with standard US 2/3/4 gang switch plates.
• Not for 3-Way or Dimmer Use: This switch is not designed for 3-way switch configurations or as a dimmer switch.
• Scollegare l'alimentazione dall'interruttore di circuito prima dell'installazione.
• Do not exceed the maximum load rating of 1000 watts.

Image 2: Important compatibility and safety notes, highlighting the 2.4GHz Wi-Fi, neutral wire requirement, and non-compatibility with 3-way or dimmer setups.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti:

• MOES WiFi Smart Wall Light Switch (1 Gang, White)
• Manuale d'uso
• Viti di montaggio

4. Specifiche del prodotto

Image 3: Detailed dimensions and back panel view of the MOES Smart Wall Light Switch, showing wiring terminals.

5. Guida all'installazione

1. Spegnimento dell'alimentazione: Before starting any electrical work, ensure the power is completely off at the circuit breaker for the relevant circuit.
2. Rimuovi il vecchio interruttore: Rimuovere con cautela l'interruttore a parete esistente dalla scatola a muro.
3. Identificare i fili: Identify the Live (L), Neutral (N), and Load (L1, L2, L3) wires. A neutral wire is required for this smart switch. If you do not have a neutral wire, consult a qualified electrician.
4. Cablare l'interruttore intelligente: Connect the wires to the corresponding terminals on the MOES Smart Wall Light Switch as shown in the diagram below.
   • Connect the Live wire to the 'L' terminal.
   • Connect the Neutral wire to the 'N' terminal.
   • Connect the Load wire(s) to the 'L1' terminal (for 1-gang switch).
5. Montare l'interruttore: Secure the smart switch into the wall box using the provided screws. Ensure wires are not pinched.
6. Fissare la mascherina: Snap the glass touch panel faceplate onto the switch.
7. Ripristina alimentazione: Riattivare la corrente tramite l'interruttore automatico.

Image 4: Wiring diagram illustrating connections for 1-gang, 2-gang, and 3-gang smart switches. For this 1-gang model, refer to the leftmost diagram.

Image 5: Visual comparison showing the replacement of a traditional keystroke switch with an intelligent touch switch.

6. Configurazione dell'app e connessione Wi-Fi

1. Scarica l'app: Scarica l'app "Smart Life" dall'App Store (iOS) o dal Google Play Store (Android).
2. Registrati/Accedi: Registrati per un nuovo account o accedi con uno esistente.
3. Add Device (Easy Mode):
   • Open the Smart Life app and tap the '+' icon in the top right corner to add a device.
   • Select "Wall Switch" from the device type list.
   • Ensure the indicator light on the switch is rapidly blinking (two times per second). If not, reset the device (see "Resetting the Device" below).
   • Confirm the indicator light is rapidly blinking in the app.
   • Enter your 2.4GHz Wi-Fi network password. Ensure your phone and the switch are close to your Wi-Fi router.
   • The app will begin connecting to the device. Once successful, you can rename the switch.
4. Ripristino del dispositivo:
   • To reset the switch to "Default Normal Mode" (fast blinking for Easy Mode connection), press and hold any button on the switch for approximately 20 seconds until the indicator light blinks quickly.
   • To enter "AP Mode" (slow blinking for AP Mode connection, if Easy Mode fails), press and hold any button for more than 20 seconds until the indicator light blinks very slowly.

7. Istruzioni per l'uso

7.1. Controllo manuale

The glass touch panel allows for direct control. Simply tap the illuminated area on the switch to turn the connected light or appliance ON or OFF.

7.2. Remote Control via Smart Life App

Once connected to the Smart Life app, you can control your switch from anywhere using your smartphone, provided you have an internet connection (Wi-Fi or 4G).

• Apri l'app Vita intelligente.
• Select your MOES Smart Wall Light Switch from the device list.
• Tap the ON/OFF icon to control the light.

Image 6: A smartphone displaying the Smart Life app interface, showing remote control functionality for the smart switch.

7.3. Controllo vocale (Alexa e Google Assistant)

Integrate your MOES Smart Wall Light Switch with Amazon Alexa or Google Assistant for convenient voice control.

1. Collega l'account Smart Life: Nell'app Alexa o Google Home, vai alla sezione "Skill" o "Funziona con Google". Cercare "Smart Life" and enable the skill/service. Link your Smart Life account using your app credentials.
2. Scopri i dispositivi: Una volta effettuato il collegamento, chiedi al tuo assistente vocale di "Trovare dispositivi" oppure avvia manualmente la ricerca dei dispositivi nell'app.
3. Comandi vocali: Ora puoi usare comandi vocali come:
   • "Alexa, accendi [Nome dispositivo]"
   • "Ehi Google, disattiva [Nome dispositivo]"
   • "Alexa, set [Device Name] to 50%" (Note: This switch is not a dimmer, so percentage commands may not function as expected for brightness control but might be interpreted as ON/OFF by some systems).

Image 7: The MOES Smart Switch positioned between an Amazon Echo and Google Home device, illustrating voice control capabilities.

7.4. Timing Function and Schedules

Utilize the Smart Life app to set schedules and timers for automated control of your lights.

• In the Smart Life app, select your switch.
• Access the "Schedule" or "Timer" function.
• Set specific times for the light to turn ON or OFF daily, weekly, or based on sunrise/sunset.

Image 8: A smartphone screen showing the scheduling interface within the Smart Life app, with options to set ON/OFF times for the smart switch.

8. Manutenzione

• Pulizia: The toughened glass surface is designed to resist scratches. Clean with a soft, damp panno. Evitare detergenti abrasivi o solventi.
• Aggiornamenti del firmware: Controllare periodicamente l'app Smart Life per verificare la disponibilità di aggiornamenti del firmware, per garantire prestazioni e sicurezza ottimali.
• Condizioni ambientali: Ensure the switch is not exposed to excessive moisture or extreme temperatures beyond its operating range.

9. Risoluzione Dei Problemi

10. Garanzia e supporto

MOES products are designed for reliability and performance. For warranty information, technical support, or assistance with your MOES WiFi Smart Wall Light Switch, please contact MOES customer service through their official website or the contact information provided with your purchase. Please have your model number (43237-2) and purchase details ready.

For additional resources and product information, visit the official MOES Store: Negozio MOES su Amazon