Introduzione
Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.
Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.
Informazioni sulla sicurezza
Durante l'installazione e il funzionamento, osservare le seguenti precauzioni di sicurezza:
- AVVERTIMENTO: Rischio di scossa elettrica. Scollegare l'alimentazione dal fusibile o dall'interruttore automatico prima dell'installazione o della manutenzione.
- L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutti i codici e le ordinanze elettriche locali.
- Garantire la fornitura voltage is compatible with the fixture's requirements (100-277V AC).
- Non maneggiare l'apparecchio con le mani bagnate o quando si è in piedi su superfici bagnate o bagnate.amp superfici.
- This fixture is designed for outdoor use and is IP65 rated for wet locations.
- Do not attempt to modify or disassemble the fixture beyond what is described in this manual.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
- Photocell (pre-installed)
- Non-photocell cover (for disabling photocell function)
- Materiale di montaggio (viti, dadi per cavi)
- Manuale di istruzioni
Caratteristiche del prodotto
- Efficienza energetica: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
- Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
- Testa regolabile: Fixture angle can be adjusted 0-90 degrees for precise light direction.
- Costruzione durevole: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
- Lunga durata: Maintenance-free LEDs with 50,000 hours of life.
Configurazione e installazione
Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.
1. Montaggio dell'apparecchio
- Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
- Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
- Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.
Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.
2. Collegamenti elettrici
- Connect the fixture's black wire to the supply's live/hot wire.
- Connect the fixture's white wire to the supply's neutral wire.
- Connect the fixture's green/ground wire to the supply's ground wire.
- Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
- Infila con attenzione tutti i cavi nella scatola di giunzione.
3. Fissaggio dell'apparecchio
- Attach the fixture body to the mounted plate, ensuring it is securely hinged.
- Close the fixture and tighten any securing screws to ensure a watertight seal.
Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.
4. Photocell Configuration (Optional)
The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.
- To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
- Pull out the existing photocell.
- Screw in the non-photocell cover into the opening.
- Rimontare il lamp alloggiamento.
Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.
Istruzioni per l'uso
Funzionamento delle fotocellule
If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.
Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.
Regolazione della testa della lampada
The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.
Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.
Manutenzione
The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.
- Pulizia: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp panno. Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura o la lente.
- Ispezione: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- I LED sono integrati e non sostituibili dall'utente.
Risoluzione dei problemi
If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende | Nessuna alimentazione Cablaggio difettoso Photocell malfunction (if installed) | Controllare l'interruttore automatico e i collegamenti di alimentazione. Verificare che i collegamenti elettrici siano saldi. Ensure photocell is not obstructed or try replacing it with the non-photocell cover to test. |
| La luce rimane accesa durante il giorno | Photocell obstructed or receiving insufficient light Malfunzionamento della fotocellula | Clear any obstructions from the photocell. Ensure it is exposed to natural daylight. Test with the non-photocell cover. |
| La luce tremola | Collegamento del cablaggio allentato Voltage fluttuazioni | Controllare e fissare tutti i collegamenti elettrici. Consult a qualified electrician to check power supply stability. |
Specifiche
Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.
| Attributo | Valore |
|---|---|
| Marca | DAKASON |
| Numero di modello | WP-30D-50 |
| Cosatage | 30 Watt |
| Luminosità | 3300 lumen |
| Temperatura del colore | 5000 Kelvin (bianco freddo) |
| Voltage | 100-277 Volt (CA) |
| Materiale | Alluminio pressofuso, vetro temperato |
| Dimensioni (L x P x A) | 6.6" x 7.9" x 4.3" |
| Peso dell'articolo | 4 libbre |
| Grado di protezione IP | IP65 (impermeabile) |
| Caratteristiche speciali | Dusk-to-Dawn Photocell, Adjustable Head, Full Cut-Off, Instant On, Not Dimmable, Shatter Resistant |
| Certificazioni | ETL quotato |
| Codice UPC | 766832159971 |
Informazioni sulla garanzia
This DAKASON LED Wall Pack comes with a Garanzia di 5 anno. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.
Assistenza clienti
For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.
