Introduzione
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your FLIR K45 High Performance Thermal Imaging Camera. The FLIR K45 is designed to provide clear thermal images in challenging environments, aiding in navigation and decision-making.
Figure 1: FLIR K45 Thermal Imaging Camera in operation, showing a thermal view.
Informazioni sulla sicurezza
Always read and understand all safety warnings and instructions before operating the FLIR K45 camera. Failure to do so may result in injury or damage to the device.
- Do not expose the camera to temperatures exceeding its operational limits (up to 500°F for 5 minutes).
- Ensure the battery is properly charged and installed before use.
- Avoid direct exposure of the lens to extreme heat sources when not in use for thermal imaging.
- The device is water resistant (IP67), but avoid prolonged submersion.
Componenti del prodotto
The FLIR K45 package includes the following items:
- FLIR K45 Thermal Imaging Camera
- Batteria agli ioni di litio (inclusa)
- Charging dock (if applicable, based on image)
- Cavo USB
- Adattatore di alimentazione
- Documentazione
Figura 2: Fronte view of the FLIR K45 camera, showing the screen and control buttons.
Figura 3: Fronte view of the FLIR K45, highlighting the thermal lens.
Impostare
1. Carica della batteria
The FLIR K45 uses a Lithium Ion battery. Before first use, fully charge the battery. Connect the camera to the charging dock or directly via the USB cable to a power adapter.
Figure 4: FLIR K45 in its charging dock. Camera not included with charger.
2. Inserimento della batteria
Locate the battery compartment, typically at the base of the handle. Insert the charged Lithium Ion battery, ensuring it clicks into place securely.
3. Accensione iniziale
Press and hold the power button (green button) to turn on the device. The 4-inch screen will illuminate, displaying the FLIR logo followed by the thermal image feed.
Istruzioni per l'uso
1. Funzionamento di base
Point the camera towards the area of interest. The thermal image will be displayed on the 4-inch screen. The K45 provides a crisp, 240 x 180 pixel thermal image, enhanced by FSX™ Flexible Scene Enhancement for improved detail.
Figura 5: Esample of a thermal image captured by the FLIR K45, indicating temperature variations.
2. Modalità immagine
The FLIR K45 offers several image modes to optimize viewing for different scenarios. Use the mode selection button (often indicated by a plus/minus or menu icon) to cycle through these options:
- IR image: Standard infrared thermal view.
- TI Basic fire-fighting mode: Optimized for general firefighting scenarios.
- Black-and-white fire-fighting mode: Provides a high-contrast monochrome thermal view.
- Fire mode: Specific mode for fire scene analysis.
- Search-and-rescue mode: Enhances visibility for locating individuals.
- Heat detection mode: Highlights areas of significant heat.
- Thumbnail gallery: Consente di riview of saved images.
Figure 6: Detail of the FLIR K45 control buttons for navigation and mode selection.
3. Cattura delle immagini
To capture a thermal image, press the designated capture button (refer to the device's physical buttons, often a trigger or a specific button on the control panel). Images are saved to the internal memory or an inserted SD card.
Manutenzione
1. Pulizia della fotocamera
Regularly clean the camera body with a damp cloth. For the lens, use a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive cleaners or solvents.
2. Cura della batteria
To prolong battery life, avoid fully discharging the battery frequently. Store the camera and battery in a cool, dry place when not in use for extended periods.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La fotocamera non si accende. | Batteria scarica o scarica. | Caricare completamente la batteria. |
| L'immagine è sfocata o poco chiara. | Dirty lens; extreme temperature difference. | Clean the lens; allow camera to acclimate to environment. |
| Impossibile salvare le immagini. | Memory full or no SD card inserted. | Delete old images or insert a compatible SD card. |
Se riscontri problemi non elencati qui, consulta la sezione di supporto per ulteriore assistenza.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Modello | FLIR K45 |
| Risoluzione termica | 240 x 180 pixel |
| Dimensioni dello schermo | 4 pollici (11 cm) |
| Precisione | ±4°C (±7.2°F) or ±4% of reading (for ambient 10°C to 35°C) |
| Durata | Withstands 2-meter drop, IP67 water resistant |
| Temperatura di esercizio | Fully operational up to 500°F (5 minutes) |
| Tipo di batteria | 1 batteria agli ioni di litio (inclusa) |
| Dimensioni del prodotto | 4.7 x 4.9 x 11 pollici |
| Peso dell'articolo | 1 libbra |
| Tipo di supporto | Scheda SD |
Informazioni sulla garanzia
The FLIR K45 camera is protected by FLIR's 2-5-10 Warranty:
- 2 anni per batterie.
- 5 anni per la macchina fotografica.
- 10 anni per il rilevatore.
For detailed warranty terms and conditions, please refer to the official FLIR websito o contattare l'assistenza clienti.
Assistenza clienti
For technical assistance, service, or additional information regarding your FLIR K45 Thermal Imaging Camera, please contact FLIR customer support or visit the official FLIR websito.
Puoi anche visitare il FLIR Store on Amazon per informazioni e risorse sui prodotti.
Video del prodotto
Nei dati disponibili non sono stati forniti video ufficiali del prodotto da parte del venditore da incorporare in questo manuale.
