Antenna WiFi direzionale automatica Falcon KING KF1001 con router WiFiMax e Range Extender Manuale utente

Introduzione

The KING KF1001 Falcon Automatic Directional WiFi Antenna with WiFiMax Router and Range Extender is designed to enhance your Wi-Fi experience, particularly in mobile environments such as RVs. This high-gain, self-pointing, roof-mounted antenna system provides fast, reliable, and secure long-range signal acquisition. It allows users to connect multiple mobile devices to a single Wi-Fi source, extending the signal within their vehicle. Operation is managed through a dedicated mobile application, simplifying network discovery and connection.

The KING KF1001 Falcon Automatic Directional WiFi Antenna and WiFiMax Router, showing the antenna unit and the separate router.

Cosa c'è nella scatola

• KING Falcon Antenna Unit
• KING WiFiMax Router
• Alimentazione 12V
• Alimentazione 9V
• Inseritore di corrente

Specifiche

Installazione

The KING KF1001 Falcon requires rooftop installation. Careful planning of component locations and proper sealing are crucial for optimal performance and longevity. Refer to the detailed installation video below for a comprehensive guide.

Installazione completataview Video

Passaggi chiave dell'installazione:

1. Determine Component Locations:
   • Ensure adequate space for the antenna head to rotate freely. A 24-inch diameter circle is required for rotation.
   • The antenna head must not rotate over the edge of the roof.
   • Orient the antenna so the coax cable exits the base towards the rear of the vehicle.
   • Locate the antenna such that the coax cable can reach the power inserter and KING WiFiMax inside the vehicle.
   • The power inserter and KING WiFiMax require a 110 VAC power source.
   • Nota: Do not locate the interior components in a slide-out section of the vehicle.
2. Montare l'antenna:
   • Drill a minimum 5/16" hole through the roof where the cable will enter the vehicle.
   • Feed the cable through the hole. Importante: The cable has different connectors on each end.
   • Adjust the cable position to reach both the antenna and interior components.
   • Route the cable under the circuit board within the antenna base. Connect the cable to the circuit board. Keep as large a bend as possible in the cable. Attenzione: Do not touch the circuit board. Hold the cable by the connector, not by the cable. Push the cable onto the circuit board connector until it "clicks."
   • Fill the coax channel with ROOF-COMPATIBLE sealant.
   • Apply sealant around the perimeter of the base.
   • Place the antenna in position. Attenzione: Do not pinch the cable under the edge of the base.
   • Fasten the antenna to the roof with six (6) fasteners. The installer must determine the best fasteners to use based on the roof material.
   • Seal the six (6) fastener heads. Ensure the coax port and perimeter are fully sealed as well.
   • Seal the roof hole where the cable enters so it is completely waterproof.
   • Secure the cable to the roof every 12-18 inches.
3. Connect Interior Components:
   • If desired, install the included white or black wall plate.
   • Connect the cable from the antenna to the power inserter.
   • Connect the power inserter to the KING WiFiMax with the included short cable.
   • Plug in the power inserter and KING WiFiMax to a 110 VAC power source.

Operazione

The KING Falcon system is designed for user-friendly operation via the free KING Wi-Fi App, available for Android and iOS devices. Once installed and powered, the system will automatically search for available Wi-Fi networks. Use the app to select your desired network, and the antenna will automatically orient itself for optimal signal reception. This allows you to effortlessly connect all your Wi-Fi enabled devices, such as smartphones, tablets, laptops, and smart TVs, to a single extended network within your vehicle.

Nota: A Wi-Fi source is required for the KING Falcon to function. The KING Falcon antenna cannot be used as a standalone Wi-Fi hotspot.

Manutenzione

To ensure continued optimal performance of your KING KF1001 Falcon system, regular maintenance is recommended:

• Pulizia periodica: Gently clean the exterior of the antenna unit on the roof with a soft, damp panno. Evitare detergenti abrasivi o prodotti chimici aggressivi.
• Inspect Sealant: Annually inspect all sealant points around the antenna base and cable entry points for cracks or deterioration. Reapply roof-compatible sealant as needed to maintain a waterproof seal.
• Ispezione dei cavi: Check the coax cable for any signs of wear, fraying, or damage. Ensure all connections are secure.
• Aggiornamenti software: Check the KING Wi-Fi App periodically for any available firmware or software updates for the WiFiMax Router to ensure you have the latest features and performance improvements.

Risoluzione dei problemi

If you encounter issues with your KING KF1001 Falcon system, consider the following troubleshooting steps:

• Nessun segnale Wi-Fi:
  • Verify that the KING WiFiMax Router and Power Inserter are properly plugged into a 110 VAC power source and their indicator lights are on.
  • Ensure the coax cable is securely connected at both the antenna and the power inserter.
  • Check if there is an active Wi-Fi source available in your location. The system requires an external Wi-Fi signal to extend.
  • Use the KING Wi-Fi App to scan for available networks and attempt to connect.
• Bassa velocità di Internet:
  • The extended Wi-Fi speed is dependent on the strength and speed of the original Wi-Fi source. If the source signal is weak or slow, the extended signal will also be affected.
  • Ensure the antenna has a clear line of sight to the Wi-Fi source. Obstructions can degrade performance.
  • Reduce the number of devices connected to the WiFiMax network.
• Problemi di connessione dell'app:
  • Ensure your mobile device is connected to the WiFiMax network (its SSID will be visible).
  • Restart the KING WiFiMax Router by unplugging it from power for 30 seconds and then plugging it back in.
  • Ensure your KING Wi-Fi App is updated to the latest version.

For more detailed troubleshooting or persistent issues, please refer to the official user manual PDF available on the product page or contact KING customer support.

Garanzia e supporto

For information regarding product warranty, returns, or technical support, please refer to the documentation included with your product or visit the official KING website. You may also find additional resources and FAQs on the product's Amazon listing page.

Manuale utente ufficiale (PDF): Scarica PDF