Manuale utente del rubinetto per lavabo Kingston Brass FSC8923DKL Kaiser Widespread

Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kingston Brass FSC8923DKL Kaiser 8-inch Widespread Lavatory Faucet. This faucet features a durable brass construction, a brushed brass finish, and a 3-hole widespread installation design, suitable for various bathroom aesthetics. Please read these instructions thoroughly before beginning installation or use to ensure proper function and longevity of the product.

Informazioni sulla sicurezza

• Chiudere sempre l'alimentazione principale dell'acqua prima di installare o eseguire la manutenzione del rubinetto.
• Durante l'installazione, indossare adeguati dispositivi di protezione individuale, come occhiali e guanti di sicurezza.
• In caso di dubbi su qualsiasi fase del processo di installazione, consultare un idraulico qualificato.
• Assicurarsi che tutti i collegamenti siano ben saldi per evitare perdite. Non serrare eccessivamente.
• Tenere le parti di piccole dimensioni lontano dalla portata dei bambini.

Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• Assemblaggio del rubinetto
• Hardware di montaggio
• Gruppo di scarico a scomparsa

Immagine: Oltreview of the Kingston Brass FSC8923DKL Kaiser widespread lavatory faucet, showing the main spout, two handles, and the included pop-up drain components.

Configurazione e installazione

This faucet is designed for a 3-hole widespread deck mount installation, with an adjustable spread from 8 to 16 inches.

Passaggi di pre-installazione:

1. Chiudere l'erogazione dell'acqua tramite la valvola di intercettazione principale.
2. Remove the old faucet if applicable. Clean the sink surface thoroughly.
3. Ensure the mounting holes on your sink or countertop are compatible with a widespread faucet (typically three holes). Refer to the technical drawing for specific dimensions.

Image: Detailed technical drawing of the Kingston Brass FSC8923DKL faucet components, including dimensions for spout height, reach, and mounting hole requirements for widespread installation.

Installazione del rubinetto:

1. Installare le maniglie: Insert the hot and cold handles into the outer mounting holes. Secure them from underneath the sink using the provided washers and nuts. Ensure the handles are oriented correctly for hot (left) and cold (right) water.
2. Install Spout: Place the main spout assembly into the center mounting hole. Secure it from underneath with the provided mounting hardware.
3. Collegare le linee idriche: Connect the hot and cold water supply lines to the corresponding inlets on the faucet handles. Connect the flexible hoses from the handles to the main spout assembly. Use thread sealant tape on all threaded connections to prevent leaks.
4. Installare lo scarico a scomparsa: Follow the instructions provided with the pop-up drain assembly. Typically, this involves placing the drain body into the sink drain hole, applying plumber's putty or a gasket, and securing it from underneath with a washer and nut. Connect the lift rod to the faucet's lift mechanism.
5. Test per perdite: Once all connections are secure, slowly turn on the main water supply. Check all connections for leaks. If leaks occur, tighten the connections carefully.

Image: The Kingston Brass FSC8923DKL faucet with its brushed brass finish and black lever handles, fully installed on a white marble countertop with a white sink, demonstrating its widespread configuration.

Istruzioni per l'uso

The Kingston Brass FSC8923DKL faucet features two lever handles for controlling water flow and temperature.

• Flusso d'acqua: Turn the handles clockwise to decrease water flow and counter-clockwise to increase water flow.
• Controllo della temperatura: La manopola sinistra controlla l'acqua calda, mentre quella destra controlla l'acqua fredda. Regola entrambe le manopole per ottenere la temperatura dell'acqua desiderata.
• Piletta di scarico a scomparsa: Use the lift rod located behind the spout to open and close the sink's pop-up drain.

Immagine: un primo piano view of one of the lever handles of the Kingston Brass FSC8923DKL faucet, highlighting the black silicone rubber coating and the brushed brass finish.

Cura e manutenzione

Proper care will help maintain the finish and performance of your faucet.

• Pulizia: Pulisci regolarmente il rubinetto con un panno morbido e un sapone delicato. Risciacqua abbondantemente con acqua pulita e asciuga con un panno morbido per evitare macchie d'acqua.
• Evitare detergenti aggressivi: Do not use abrasive cleaners, harsh chemicals, or polishes containing alcohol, ammonia, or bleach, as these can damage the brushed brass finish.
• Manutenzione dell'aeratore: Periodically unscrew the aerator from the spout tip and clean any accumulated debris or mineral deposits. This helps maintain optimal water flow.
• Drip-Free Ceramic Disc Cartridge: The faucet is equipped with a drip-free ceramic disc cartridge, which typically requires no maintenance. If a drip occurs, it may indicate a need for cartridge replacement.

Immagine: un primo piano view of the high-arc spout of the Kingston Brass FSC8923DKL faucet, showcasing its brushed brass finish and elegant curve.

Risoluzione dei problemi

Specifiche

Image: Diagram illustrating key features such as solid brass construction, 1/4 turn lever handles, rotating swivel spout, 3-hole installation, and 1.2 GPM flow rate, along with available finishes.

Garanzia e supporto

For specific warranty information and customer support, please refer to the documentation included with your purchase or visit the official Kingston Brass websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

For technical assistance or replacement parts, contact Kingston Brass customer service.