Lithonia Lighting QTE LED P2 40K 120 THK DDB M6 LED Flood Light User Manual

1. Prodotto finitoview

The Lithonia Lighting QTE LED P2 40K 120 THK DDB M6 LED Flood Light features a traditional and robust design with energy-efficient LEDs. It is engineered to replace up to 500W quartz halogen fixtures, making it an ideal solution for landscape, signage, and accent lighting in both commercial and residential outdoor applications.

Caratteristiche principali:

• Efficienza energetica: Provides 4,000 lumens with a 4000K cool white temperature, consuming only 40 watts.
• Lunga durata: Designed for up to 50,000 hours of light, equivalent to 17 years when used 8 hours a day.
• Costruzione durevole: Made from high-quality materials for extended reliability.
• High Industry Ratings: UL listed for safety in the United States and Canada, and DLC certified.
• Wet Location Suitable: Engineered for outdoor use in wet conditions.

2. Informazioni importanti sulla sicurezza

AVVERTIMENTO: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Failure to do so may result in electric shock, fire, or other hazards.

• Prima di procedere all'installazione o alla manutenzione, scollegare sempre l'alimentazione dall'interruttore automatico.
• Ensure all electrical connections are secure and comply with local and national electrical codes.
• Non maneggiare fili elettrici sotto tensione.
• Se non si è sicuri di una qualsiasi fase del processo di installazione, consultare un elettricista qualificato.

3. Cosa è incluso

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• LED Flood Light Fixture (1)
• Piastra di montaggio (1)
• Dadi in filo (3)
• Screws for mounting (various sizes)
• Istruzioni per l'installazione

Figura 1: Prodotto principale view of the Lithonia Lighting QTE LED Flood Light.

4. Guida all'installazione

This flood light is designed for surface mount installation. Ensure the mounting surface is sturdy and capable of supporting the fixture's weight.

4.1. Preparazione per l'installazione

1. Spegni l'alimentazione: Locate the circuit breaker controlling the installation area and turn off the power. Verify power is off using a voltagetester.
2. Remove Existing Fixture (if applicable): Carefully remove any old lighting fixture, ensuring all wires are disconnected and secured.
3. Preparare la superficie di montaggio: Ensure the mounting surface is clean, dry, and free of debris.

4.2. Montaggio dell'apparecchio

1. Fissare la piastra di montaggio: Secure the provided mounting plate to the junction box or desired surface using appropriate screws. Ensure it is firmly attached.
2. Connessioni dei cavi: Connect the flood light's wires to your electrical system's wires. Follow standard electrical color codes:
   • Filo nero (caldo) to the black (hot) wire from the power supply.
   • Filo bianco (Neutro) to the white (neutral) wire from the power supply.
   • Green wire (Ground) to the green or bare copper (ground) wire from the power supply.
   Per fissare i collegamenti, utilizzare i dadi per cavi forniti.
3. Secure Fixture to Mounting Plate: Align the flood light's base with the mounting plate and secure it using the provided screws. Ensure a tight seal to prevent moisture intrusion.
4. Regola l'angolo: The fixture features an adjustable knuckle mount. Loosen the Phillips screw on the side of the knuckle, adjust the light to the desired projection angle, and then tighten the screw firmly to secure its position.

Figura 2: Fronte view of the LED Flood Light, showing the LED array.

Figura 3: Indietro view of the LED Flood Light, highlighting the heat dissipation fins and photocell sensor.

Figura 4: lato view of the LED Flood Light, illustrating the adjustable knuckle mount for directing light.

5. Istruzioni per l'uso

5.1. Photocell Functionality

This flood light is equipped with a built-in photocell sensor, enabling automatic dusk-to-dawn operation. The sensor detects ambient light levels and will turn the fixture on when it gets dark and off when it gets light.

• Ensure the photocell sensor (located on the back of the fixture) is not obstructed by any objects, as this may interfere with its proper function.
• No manual adjustment is typically required for the photocell once installed correctly.

6. Cura e manutenzione

To ensure optimal performance and longevity of your LED Flood Light, follow these maintenance guidelines:

• Pulizia: Pulire periodicamente la lente e l'esterno dell'apparecchio con un panno morbido e asciutto.amp panno. Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura o la lente.
• Ispezione: Ispezionare regolarmente l'apparecchio per verificare eventuali segni di danni, collegamenti allentati o usura. Risolvere tempestivamente eventuali problemi.
• Nessuna parte riparabile dall'utente: The LED components are integrated and not user-replaceable. Do not attempt to open the fixture.

7. Risoluzione Dei Problemi

If your LED Flood Light is not functioning as expected, refer to the following common issues and solutions:

8. Specifiche tecniche

9. Garanzia e assistenza clienti

This Lithonia Lighting QTE LED Flood Light is backed by a Garanzia limitata di 5 anno. For warranty claims, technical assistance, or any product-related inquiries, please contact Lithonia Lighting customer service.

Refer to the product packaging or the official Lithonia Lighting websito per le informazioni di contatto più aggiornate e i termini di garanzia dettagliati.