Introduzione
This manual provides essential information for the proper installation, operation, and maintenance of the Notifier LCD2-80 80-Character LCD Mimic Annunciator. This device is designed to provide remote annunciation of fire alarm system events, displaying critical information and allowing for basic system control.
Informazioni sulla sicurezza
Adherence to safety guidelines is crucial for preventing injury and ensuring proper system function.
- L'installazione e la manutenzione devono essere eseguite esclusivamente da personale qualificato e autorizzato.
- Always disconnect all power sources to the fire alarm control panel (FACP) and associated devices before performing any installation, maintenance, or service.
- Refer to all applicable local and national electrical codes, as well as fire safety standards, for proper installation and wiring procedures.
- Do not operate the annunciator if it appears damaged or is not functioning correctly.
Prodotto finitoview
The Notifier LCD2-80 is an 80-character liquid crystal display (LCD) remote annunciator that provides clear, real-time system status information. It features a backlit display for visibility in various lighting conditions, a series of indicator LEDs, and tactile control buttons for user interaction.
Figura 1: Notifier LCD2-80 Front Panel. This image displays the annunciator's front panel, featuring an 80-character LCD screen at the top, a column of indicator LEDs, and a set of control buttons below the display. The LCD shows a sample message: "NOTIFIER REMOTE ANNUNCIATOR ALL SYSTEMS NORMAL 08:00 03/15/10". The labels for the indicator LEDs are ALARM, SUPERVISORY, SYSTEM TROUBLE, POINT DISABLE, SIGNAL SILENCE, and OTHER. The control buttons are ACKNOWLEDGE, SIGNAL SILENCE, RESET, DRILL, and LAMP TEST.
Componenti chiave
- Schermo LCD: An 80-character backlit screen that provides detailed system status messages, time, and date. (As illustrated in Figure 1, displaying "NOTIFIER REMOTE ANNUNCIATOR ALL SYSTEMS NORMAL 08:00 03/15/10")
- LED indicatori: A vertical column of light-emitting diodes that illuminate to visually indicate various system conditions such as ALARM, SUPERVISORY, SYSTEM TROUBLE, POINT DISABLE, SIGNAL SILENCE, and OTHER.
- Pulsanti di controllo: A set of push-buttons enabling user interaction with the system, including ACKNOWLEDGE, SIGNAL SILENCE, RESET, DRILL, and LAMP TEST.
Configurazione e installazione
The LCD2-80 annunciator is designed for secure mounting within specific Notifier back boxes. Proper installation is critical for reliable operation.
Montaggio
- Select an appropriate mounting location that is easily accessible, visible, and protected from environmental extremes.
- Securely mount the compatible back box (ABS-1T, ABF-1DB, or ABF-1B) to the wall or surface according to the back box's specific installation instructions.
- Carefully align the LCD2-80 annunciator with the mounted back box and secure it using the provided hardware. Ensure a snug fit without overtightening.
Cablaggio
Connect the annunciator to the fire alarm control panel (FACP) using appropriate wiring methods as specified in the FACP's installation manual and local electrical codes. Ensure proper polarity and secure connections for all wiring terminals. Incorrect wiring can lead to system malfunctions or damage.
Istruzioni per l'uso
The LCD2-80 provides real-time status updates and allows for basic system control functions.
Visualizza informazioni
The LCD screen continuously displays system status messages. For example, "ALL SYSTEMS NORMAL" indicates no active events. In the event of an alarm, trouble, or supervisory condition, the display will show detailed information about the event, including its type, location, and time.
Pulsanti di controllo
- ACKNOWLEDGE: Used to acknowledge new events. Pressing this button typically silences the local annunciator sounder and changes the event status from "new" to "acknowledged" on the display.
- SILENZIO SEGNALE: Used to silence audible notification appliances (e.g., horns, bells) connected to the FACP. This action usually requires a specific access level to prevent unauthorized silencing.
- RIPRISTINA: Used to reset the fire alarm control panel after an alarm or trouble condition has been cleared. This button typically requires a specific access level.
- TRAPANO: Initiates a system-wide fire drill. This function should only be used for testing purposes and typically requires a specific access level.
- LAMP TEST: Activates all indicator LEDs and illuminates the LCD backlight to confirm they are functioning correctly. This is a useful diagnostic tool.
LED indicatori
The LEDs provide a quick visual indication of the system's operational status:
- ALLARME: Illuminates when a fire alarm condition is detected by the system.
- VIGILANZA: Illuminates for supervisory conditions, such as a sprinkler system flow alarm or a valve tampeh.
- SYSTEM TROUBLE: Illuminates for system faults, malfunctions, or abnormal conditions that require attention.
- POINT DISABLE: Illuminates when a specific detection point, zone, or output has been disabled within the system.
- SILENZIO SEGNALE: Illuminates when audible notification appliances have been silenced.
- ALTRO: Illuminates for other specific system conditions or events not covered by the primary indicators.
Manutenzione
Regular maintenance ensures the reliable and continued operation of your Notifier LCD2-80 annunciator.
- Pulizia: Gently wipe the display screen and control buttons with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
- Controllo della funzionalità: Periodically perform a LAMP TEST (using the dedicated button) to ensure all indicator LEDs and the LCD backlight are operational. Any non-illuminating LED or a blank display during this test may indicate a fault.
- Test di sistema: Follow the fire alarm control panel's (FACP) recommended testing schedule to ensure the annunciator communicates correctly with the main panel and accurately reflects system status.
- Ispezione visiva: Regularly inspect the annunciator for any signs of physical damage, loose connections, or environmental issues.
Risoluzione dei problemi
This section addresses common issues you might encounter with the LCD2-80 annunciator.
Il display è vuoto o non risponde
- Check all power connections to the annunciator and the main FACP. Ensure power is supplied and stable.
- Verify that the annunciator is properly connected to the communication loop or data bus of the FACP. Check for loose or damaged wiring.
- Ensure the FACP itself is powered on and operating correctly.
- If the issue persists after checking connections and power, contact qualified service personnel for further diagnosis.
Indicator LEDs Not Illuminating During Lamp Test
- If individual LEDs fail to illuminate, the annunciator unit may require servicing or replacement.
- If all LEDs fail to illuminate during a lamp test, re-check power and communication connections to the FACP.
Annunciator Not Responding to Button Presses
- Verify that the annunciator has power and the display is active.
- Ensure the FACP is not in a state that prevents annunciator control (e.g., programming mode, system fault).
- Confirm that the user has the appropriate access level for the desired function (e.g., Signal Silence, Reset).
- If the problem continues, contact qualified service personnel.
Specifiche
Technical specifications for the Notifier LCD2-80 80-Character LCD Mimic Annunciator:
| Caratteristica | Dettaglio |
|---|---|
| Modello | LCD2-80 |
| Numero di parte | NLCD280 |
| Tipo di visualizzazione | 80-character, backlit LCD |
| Montaggio | Designed for ABS-1T, ABF-1DB, ABF-1B back boxes |
| Fonte di alimentazione | Battery Powered (typically powered by FACP with battery backup) |
| Peso dell'articolo | 12.8 once (circa 0.36 kg) |
| Produttore | NOTIFICA |
| Codice UPC | 670875921887 |
| Data prima disponibilità | 15 aprile 2016 |
Garanzia e supporto
For detailed warranty information, technical support, and service inquiries regarding your Notifier LCD2-80 annunciator, please refer to the documentation provided with your fire alarm control panel or contact Notifier customer service directly. It is recommended that all service and maintenance be performed by certified fire alarm technicians.
Nota: This product is an integral component of a life safety system and must be installed, maintained, and serviced by qualified and certified professionals in accordance with all applicable codes and standards.
