1. Introduzione
This manual provides instructions for the installation, operation, and maintenance of your Waterdrop WD-F46 refrigerator water filter. This filter is designed to provide filtered water by reducing various impurities. Please read this manual thoroughly before installation and keep it for future reference.
2. Compatibilità del prodotto
The Waterdrop WD-F46 water filter is a replacement for the following refrigerator water filter models:
- LG Models: LT1000P, LT1000PC, LT1000PCS, LT-1000PC, ADQ74793502, ADQ75795105, MDJ64844601
- Modelli Kenmore: 46-9980, 9980
It is also compatible with various LG refrigerator models including, but not limited to: LFXC22596S, LMWS27626S, LRFWS2906S, LSXS26336S, LRMXS2806S, LFXC24796D, LFXC24796S, LFXS26566M, LFXS26566S, LFXS26596M, LFXS26973D, LFXS28566, LFXS28566D, LFXS28566M, LFXS28566S, LFXS28596D, LFXS28596M, LFXS28596S, LFXS28968, LFXS28968D, LFXS28968S, LFXS30796D, LFXS30796S, LMXS28626.

Immagine: Confirming the correct filter model (WD-F46) for your refrigerator.
3. Caratteristiche del prodotto
The Waterdrop WD-F46 filter incorporates advanced filtration technology and materials to enhance water quality.
- Prestazioni certificate: Independently tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of chlorine, taste, and odor. Also certified by NSF 372 for lead-free materials.
- Filtrazione avanzata: Utilizes a Sri Lankan coconut shell carbon block, which provides a large surface area and numerous micropores for effective filtration.
- Riduzione delle impurità: Designed to reduce chlorine, taste, odor, rust, sand, large particles, heavy metals, and other suspended particles.
- Ritenzione minerale: Retains beneficial minerals in the water.
- Sicurezza dei materiali: Constructed from BPA-free and food-grade materials.
- Vestibilità di precisione: Engineered for a precise fit to prevent leakages and ensure compatibility with specified refrigerator models.

Immagine: NSF 42 certification for chlorine, taste, and odor reduction.

Immagine: Illustrazione del multi-stage filtration process reducing various impurities.

Immagine: Highlighting the use of natural coconut shell carbon and BPA-free, lead-free materials.
4. Istruzioni per l'installazione
Follow these steps to install your new Waterdrop WD-F46 refrigerator water filter. No special tools are typically required for installation.
4.1 Preinstallazione
- Locate your refrigerator's water filter compartment, usually in the upper right corner of the fresh food section.
- Turn off the ice maker (if applicable).
- Ruotare il vecchio filtro in senso antiorario per rimuoverlo. Potrebbe gocciolare un po' d'acqua, quindi tenere a portata di mano un asciugamano.
4.2 Passaggi di installazione del filtro

Immagine: Step-by-step visual guide for filter installation.
- Prepare the Refrigerator Connector: If your refrigerator's internal connector is not horizontally aligned, use the provided adjustment tool (if included) to turn the connector counter-clockwise until the raised portion is in a horizontal position.
- Allinea il filtro: Align the notches on the new Waterdrop filter cartridge connector with the corresponding slots in the refrigerator's filter housing.
- Inserisci e blocca: Push the new filter into the housing and twist it clockwise until it locks securely into place. You may hear a slight whoosh sound as water enters the filter.
4.3 Post-Installation Flush
- Dispense approximately 2-3 gallons of water through the refrigerator's dispenser. This flushes air from the system and primes the filter.
- Check for any leaks around the filter housing. If leaks occur, remove and re-install the filter, ensuring it is properly seated and twisted clockwise until secure.

Immagine: The filter is designed for a perfect, leak-free fit.
4.4 Ripristino della spia del filtro
After replacing the filter, you must manually reset the filter indicator light on your refrigerator. The reset procedure varies by refrigerator model. Refer to your refrigerator's owner's manual for specific instructions. Common methods include:
- Pressing and holding the "Filter" or "Reset" button for 3-5 seconds.
- Pressing a combination of buttons (e.g., "Ice Type" and "Child Lock").
5. Istruzioni per l'uso
Once installed, the Waterdrop WD-F46 filter operates automatically with your refrigerator's water dispensing system. For optimal performance:
- Always use cold water for drinking and cooking from the dispenser.
- Ensure the filter is replaced regularly as recommended to maintain water quality.
6. Manutenzione
Regular maintenance ensures consistent water quality and extends the life of your refrigerator's water system.
6.1 Programma di sostituzione del filtro
It is recommended to replace your Waterdrop WD-F46 water filter every 6 mesi o dopo la filtrazione 200 galloni of water, whichever comes first. This schedule may vary depending on your local water quality and usage.
6.2 Using Month Install Stickers
The filter package includes complimentary month install stickers. Apply a sticker with the installation date to the filter or a visible location on your refrigerator to help track the filter's service life and remind you when a replacement is due.
7. Risoluzione Dei Problemi
In caso di problemi, fare riferimento ai seguenti suggerimenti comuni per la risoluzione dei problemi:
- Perdite d'acqua: Ensure the filter is fully inserted and twisted clockwise until it locks securely. Remove and re-install if necessary. Check the O-rings for damage.
- Sapore/odore dell'acqua sgradevole: This may indicate the filter needs replacement. Ensure the post-installation flush was performed adequately. If the issue persists after replacement, contact customer support.
- Flusso d'acqua lento: A slow flow rate can indicate a clogged filter that needs replacement. Ensure the filter is correctly installed and not obstructed.
- La spia del filtro non si ripristina: Refer to your refrigerator's owner's manual for the correct filter reset procedure.
8. Specifiche
| Specificazione | Valore |
|---|---|
| Numero di modello | WD-F46 |
| Materiale | Water Filter (Coconut Shell Carbon Block) |
| Dimensioni del prodotto | 5.71"P x 3.54"L x 7.09"A |
| Peso dell'articolo | 1.22 libbre |
| Certificazione di test esterni | NSF 42/372 |
| Portata | 0.5 GPM (1.9 LPM) |
| Pressione di esercizio | 20-100 kPa (140-689 psi) |
| Temperatura di esercizio | 34-100 °F (1-38 °C) |
| Capacità del filtro | 200 galloni (757 litri) o 6 mesi |
| Unit Count (as packaged) | 3 Count (Water Filters) |
9. Garanzia e supporto
For any questions, concerns, or support regarding your Waterdrop WD-F46 refrigerator water filter, please contact Waterdrop customer service. Refer to the product packaging or the official Waterdrop websito per le informazioni di contatto.





