1. Introduzione
This manual provides essential information for the safe and efficient use of the Delfield 2160045 Axial Ebm 115 Volt Fan. Please read these instructions thoroughly before installation, operation, or maintenance to ensure proper function and longevity of the unit. This fan is a genuine OEM replacement part from Delfield, designed for industrial and scientific applications, particularly as a cooling component.
Prodotto finitoview
The Delfield 2160045 is an axial fan operating at 115 Volts, designed for cooling purposes. Key features include:
- Numero parte: 2160045
- Voltage: 115 Volt
- Metodo di raffreddamento: Aria
- Materiale: Rame
- Paese di origine: Ungheria
- Dimensioni: Circa 6.3"L x 9"W x 9"H

Figura 1.1: Davanti view of the Delfield 2160045 Axial Ebm 115 Volt Fan, showing the fan blades and the manufacturer's label. The label indicates model EC12038BH0HT-01-002, 100-120V/220-240V AC, 50/60Hz, 15W, and part number 21600451804633149004.
2. Informazioni sulla sicurezza
Per evitare lesioni o danni al prodotto, osservare sempre le seguenti precauzioni di sicurezza.
- Disconnect power before installation, maintenance, or cleaning.
- Garantire un'adeguata messa a terra per evitare scosse elettriche.
- Non azionare il ventilatore se una qualsiasi parte è danneggiata.
- Keep fingers and foreign objects away from moving fan blades.
- Installare in un'area ben ventilata, lontano da materiali infiammabili.
- Refer to local electrical codes for wiring requirements.
3. Configurazione e installazione
This section outlines the general steps for installing the Delfield 2160045 Axial Ebm 115 Volt Fan.
- Disimballaggio: Carefully remove the fan from its packaging. Inspect for any signs of damage during transit.
- Posizione di montaggio: Select a suitable mounting location that allows for adequate airflow and is free from obstructions. Ensure the surface can support the fan's weight.
- Montaggio della ventola:
- Align the fan with the mounting holes on the equipment or enclosure.
- Secure the fan using appropriate screws or fasteners (not included). Ensure the fan is mounted firmly to prevent vibration.
- Collegamento elettrico:
- Prima di effettuare qualsiasi collegamento elettrico, assicurarsi che l'alimentazione sia scollegata.
- Connect the fan's power connector (3-Pin, 4-Pin, or SATA/Molex, depending on the specific unit and application) to the corresponding power source.
- Verificare che il volumetage matches the fan's requirements (115 Volts AC).
- Assicurarsi che tutti i collegamenti siano sicuri e isolati.
- Direzione del flusso d'aria: Confirm the desired airflow direction before final installation. Axial fans typically have an arrow indicating airflow direction on the housing.

Figura 3.1: Lato view of the Delfield 2160045 fan, illustrating its compact design and mounting points.
4. Istruzioni per l'uso
Once installed, operating the Delfield 2160045 fan is straightforward.
- Accensione: After ensuring all connections are secure and safe, restore power to the system or equipment where the fan is installed.
- Controllo iniziale: Observe the fan for proper rotation and listen for any unusual noises. The fan should operate smoothly.
- Funzionamento continuo: The fan is designed for continuous operation to provide consistent airflow and cooling.
- Monitoraggio: Periodically check the fan's performance to ensure it is effectively cooling the intended area.
5. Manutenzione
Regular maintenance ensures optimal performance and extends the lifespan of your Delfield 2160045 fan.
- Pulizia:
- Scollegare l'alimentazione prima della pulizia.
- Utilizzare una spazzola morbida o aria compressa per rimuovere polvere e detriti dalle pale della ventola e dall'alloggiamento.
- Do not use liquid cleaners directly on electrical components.
- Ispezione:
- Periodically inspect the fan for any signs of wear, damage, or loose connections.
- Check for excessive vibration or unusual noises, which may indicate a problem.
- Lubrificazione: This fan is typically sealed and does not require user lubrication. Do not attempt to lubricate internal components.

Figura 5.1: Posteriore view of the Delfield 2160045 fan, showing the motor housing and structural elements.
6. Risoluzione Dei Problemi
Per i problemi più comuni e le possibili soluzioni, fare riferimento alla tabella seguente.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La ventola non si avvia | No power supply; Loose electrical connection; Damaged fan motor | Check power source; Secure all connections; Replace fan if motor is damaged |
| La ventola fa un rumore insolito | Obstruction in fan blades; Loose mounting; Worn bearings | Disconnect power and remove obstruction; Tighten mounting screws; Replace fan if bearings are worn |
| Flusso d'aria ridotto | Dust accumulation on blades; Obstruction in airflow path | Clean fan blades and housing; Remove any obstructions |
Se il problema persiste dopo aver provato queste soluzioni, contattare personale di assistenza qualificato.
7. Specifiche
Detailed technical specifications for the Delfield 2160045 Axial Ebm 115 Volt Fan:
- Numero modello: 2160045
- Marca: DELFIELD
- Voltage: 115 Volt
- Cosatage: 115 watt
- Metodo di raffreddamento: Aria
- Tipo di connettore di alimentazione: 3-Pin or 4-Pin or SATA/Molex
- Dimensioni del prodotto: 6.3 cm L x 9 cm P x 9 cm A
- Dimensioni della confezione: 7 L x 9 A x 9 P (pollici)
- Peso del pacco: 0.7 libbre
- Materiale: Rame
- Dispositivi compatibili: Scrivania
- Produttore: DELFIELD
- Paese di origine: Ungheria
- Data prima disponibilità: 15 gennaio 2019
8. Garanzia e supporto
Specific warranty information for the Delfield 2160045 Axial Ebm 115 Volt Fan is typically provided at the point of purchase or with the product packaging. As this is a genuine OEM replacement part, warranty terms may be subject to the original equipment manufacturer's policies.
For technical support, replacement parts, or warranty claims, please contact your authorized Delfield dealer or the supplier from whom the product was purchased. Ensure you have the model number (2160045) and purchase details available when contacting support.





